Siemens Cerberus B1Q101 Parts list manual

Cerberus®
Logging printer
B1Q101 / B2Q191
Technical description
Fire & Security Products
Siemens Building Technologies Group

Data and design subject to change
without notice. / Supply subject to
availability.
ECopyright by
Siemens Building Technologies AG
Wir behalten uns alle Rechte an
diesem Dokument und an dem in ihm
dargestellten Gegenstand vor. Der
Empfänger anerkennt diese Rechte
und wird dieses Dokument nicht ohne
unsere vorgängige schriftliche
Ermächtigung ganz oder teilweise
Dritten zugänglich machen oder
ausserhalb des Zweckes verwenden,
zu dem es ihm übergeben worden ist.
We reserve all rights in this document
and in the subject thereof. By
acceptance of the document the
recipient acknowledges these rights
and undertakes not to publish the
document nor the subject thereof in
full or in part, nor to make them
available to any third party without our
prior express written authorization,
nor to use it for any purpose other
than for which it was delivered to him.
Nous nous réservons tous les droits
sur ce document, ainsi que sur l’objet
y figurant. La partie recevant ce
document reconnaît ces droits et elle
s’engage à ne pas le rendre
accessible à des tiers, même
partiellement, sans notre autorisation
écrite préalable et à ne pas
l’employer à des fins autres que
celles pour lesquelles il lui a été
remis.
Ci riserviamo ogni diritto relativo al
presente documento e sull’oggetto
illustrato in esso. La parte che riceve
il documento si impegna a non
renderlo accessibile a terzi, né per
intero né in parte, senza la nostra
previa autorizzazione scritta ed a non
usarlo per altri scopi di quello per il
quale è stato rilasciato.

03.2002
I
Fire & Security Products
Siemens Building Technologies Group
1 Overview 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Characteristics 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Mounting possibilities 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3 Block diagram / Connections 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4 Operating indicators on printer control p.c.b. K3L080 3. . . . . . . . . . . . . . . . . . . .
1.5 Ordering informations 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Parameter settings 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Paper replenishing 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

II
Fire & Security Products
Siemens Building Technologies Group
03.2002

e1510a
1
Fire & Security Products
Siemens Building Technologies Group 03.2002
1 Overview
1.1 Characteristics
B2Q191B1Q101
with optional Z3B040 paper take-up reel unit
340
240
3HE
19”
Supply voltage 9...36VDC
Current consumption
at
quiescent, min. printing, max.
p
at 9V
24V
36V
73mA
33mA
27mA
2.5A
1.0A
0.6A
Overload protection fuse 2A slow blow
Reverse voltage protection built-in
0 modem TTL, isolated A1: flat cable 14 cond.
FSK, PSK, V28 modem TTL, not isolated A2: flat cable 14 cond.
0 modem TTL / HCMOS, isolated A3: micro flat cable 20 cond.
V28 modem RS232, isolated K3: plug-in terminals
Character set EPSON / ISO
Type thermal printer, 5 ×7 dots (10 ×7 dots)
Printing speed <1.5 lines per second
Service life approx. 500000 lines
Paper length 11000 lines (40m)
Paper width 40 characters (80mm)
Permissible make of temperature sensitive pa-
per
JUJU ”TP 50KS-A”
HONSHU ”PS 65 B1”
MITSUBISHI ”F-200 U7X”
Monitored end of paper, blocked motor
B1Q101 optional unit Z3B040
B2Q191 built-in
Ambient temperature in operation
storage
0°C...+40°C
–40°C...+60°C
Mechanical stress for use in vibration-free systems
(10...55Hz, 2g, 20m/sec2)
Humidity max. 95%, annual mean 75%
Temperature sensitive
paper
storage temperature –10°C...+30°C
Power supply
Data interface
Printing mechanism
Paper take-up reel unit
Environmental specifica-
tions (DIN40040)

e1510a
2
Fire & Security Products
Siemens Building Technologies Group 03.2002
1.2 Mounting possibilities
19” front
Housing H..G600
Housing base H28G200
with cover H28T020
Housing base H26G210
with cover H26T000

e1510a
3
Fire & Security Products
Siemens Building Technologies Group 03.2002
1.3 Block diagram / Connections
1
2
3
4
5
red
D1
K3
A1
A2
A3
M
Paper end
Reset/Winding up
Paper take-up reel
unit
blue
white
red
black
yellow/green
Central ground at printing
mechanism support
Printing
mechanism
K3L080
Printer con-
trol p.c.b.
GND
Rxd
GND
Txd
9...36VDC
Data selectable via
FSK, PSK, V28 modem: TTL, not isolated
Flat cable 14 cond.
0 modem: TTL, isolated
Flat cable micro 20 cond.
V28 modem: RS232, isolated
Plug-in terminals
0 modem: TTL, isolated
Flat cable 14 cond. A1
A2
A3
K3
Supply input, from
control unit or terminal
6
5
4
3
2
1
2
1
K1
+
–
F1: 2A
K2
Printer B1Q101 / B2Q191
1.4 Operating indicators on printer control p.c.b. K3L080
A1
K3
X14 X13
A2 X12
X11
A3 K3L080
Printer con-
trol p.c.b.
S1
H1
H2
green Main program in operation
green Printing On/Off
yellow Paper end
yellow Motor blocked
Ó
Ó
Ó
Ó
Ó
H1
H2
1.5 Ordering informations
B1Q101 504580 Logging printer 19” / 3HU, 9...36VDC,
pre-wired with printer control p.c.b. K3L080
B2Q191 484888 Logging printer 240 x 340mm, 9...36VDC,
pre-wired with printer control p.c.b. K3L080 and paper take-up reel unit
Z3B040 379249 Paper take-up reel unit for B1Q101
– 379977 Spare paper rolls, 4 pcs.

e1510a
4
Fire & Security Products
Siemens Building Technologies Group 03.2002
2 Parameter settings
A1
K3
321
X14 32 X13
A2 3
2
1X12
3
2
1X11
1
A3
K3L080
Printer con-
trol p.c.b.
S1
1
8
closedopen
D1
K1
K2
H1
H2
Data interface
Jumper
D
ata
i
nter
f
ace X11 X12 X13 X14
A1 0 modem, TTL 1 – 2 – 3 1 – 2 – 3 * *
A2 FSK / PSK / V28 modem, TTL 1 – 2 – 3 1 – 2 – 3 * *
A3
0 modem TTL
port 2 1 – 2 – 3 1 – 2 – 3 1 – 2 – 3 1 – 2 – 3
A3 0 modem, TTL port 3 1 – 2 – 3 1 – 2 – 3 1 – 2 – 3 1 – 2 – 3
K3 V28 modem, RS232 1 – 2 – 3 1 – 2 – 3 * *
* = jumper without influence
Baud rate
Programming switch
B
au
d
rate S1–1 S1–2 S1–3
300Bd closed closed closed
1200Bd open closed closed
2400Bd closed open closed
9600Bd open open closed
19200Bd closed closed open
Programming switch
S1–4 S1–5 S1–6 S1–7 S1–8
ISO Latin 1 open closed closed closed closed
ISO Latin 2 open open closed closed closed
ISO Latin 3 open closed open closed closed
ISO
C i ti t
ISO Latin 4 open open open closed closed
Communication parameters:
1 start bit / 8 data bit / no parity /
ISO Latin 5 open closed closed open closed
1
s
t
ar
t bit / 8 d
a
t
a
bit /
no
par
it
y
/
1 stop bit ISO Greek open open closed open closed
1 stop bit
ISO Arabic open closed open open closed
ISO Hebrew open open open open closed
ISO Cyrillic open closed closed closed open
USA closed closed closed closed closed
France I closed open closed closed closed
Germany closed closed open closed closed
England I closed open open closed closed
Denmark I closed closed closed open closed
EPSON
C i ti t
Sweden closed open closed open closed
Communication parameters:
1 start bit / 7 data bit / EVEN parity /
Italy closed closed open open closed
1
s
t
ar
t bit / 7 d
a
t
a
bit / EVEN
par
it
y
/
2 stop bit Spain closed open open open closed
2 stop bit
Japan closed closed closed closed open
Norway I closed open closed closed open
Holland closed closed open closed open
South Africa closed open open closed open
Cyrillic closed closed closed open open
Interface
Transmission speed
Character set

e1510a
5
Fire & Security Products
Siemens Building Technologies Group 03.2002
3 Paper replenishing
B1Q101 B2Q191
Paper path
1. Switch off the printer via control unit.
2. Swing out the printer unit:
remove the screws on the right-hand side or open hinged cover with the key,
swing out the unit to the left.
3. Remove the used paper tape.
4. Lift the paper flap Aand slide a new paper roll over the spindle B.
5. Press the leading edge of the paper lightly against the flap and feed it into the
printer through the slot C.
Push down the release lever Dto insert the paper.
6. The paper can be transported by means of the knurled wheel E.
7. Thread the leading edge of the paper around the take-up roller Fand fix it with the
paper gripper G.
8. Press winding up key H, the paper take-up motor is switched on for approx. 20
secs.
9. Switch on the printer.
C
BAE
D
H
F
G
4. 5. 5. 6. 8. 7.
– 379977 Spare paper rolls, 4 pcs.
or „JUJU TP 50KS–A” or „HONSHU PS 65 B1” or „MITSUBISHI F–200 U7X”.
Procedure
Spare paper rolls

Back
6
Fire & Security Products
Siemens Building Technologies Group 03.2002
Document no.
Edition
e1510a
03.2002
Siemens Building Technologies AG
CH8708 Männedorf
Alte Landstrasse 411
Tel.
Fax
www.cerberus.ch
+41 1 − 922 61 11
+41 1 − 922 64 50
Manual
Section
MT7000
2
CG60CS6ZHI12
6109