Siemens SCALANCE XC-100 User manual

SCALANCE XC-100
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC NET
Industrial Ethernet switches
SCALANCE XC-100
Operating Instructions
06/2016
C79000
-G8976-C415-02
Introduction
1
Safety notices
2
Description of the device
3
Mounting
4
Connecting up
5
Maintenance and
troubleshooting
6
Technical specifications
7
Certifications and approvals
8
Dimension drawings
9

Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY
C79000-G8976-C415-02
Ⓟ
06/2016 Subject to change
Copyright © Siemens AG 2016.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02 3
Table of contents
1 Introduction............................................................................................................................................. 5
2 Safety notices ......................................................................................................................................... 9
3 Description of the device....................................................................................................................... 11
3.1 Product overview ....................................................................................................................11
3.2 Device views ...........................................................................................................................12
3.2.1 Device view of a SCALANCE XC106-2..................................................................................12
3.2.2 Device view of a SCALANCE XC108 .....................................................................................13
3.2.3 Device view of a SCALANCE XC116 .....................................................................................14
3.2.4 Device view of a SCALANCE XC124 .....................................................................................15
3.3 LED display.............................................................................................................................16
3.4 SET button ..............................................................................................................................17
4 Mounting............................................................................................................................................... 19
4.1 Safety notices for installation ..................................................................................................19
4.2 Types of installation ................................................................................................................21
4.3 Mounting on DIN rails .............................................................................................................22
4.4 Installation on a standard S7-300 rail .....................................................................................23
4.5 Installation on a standard S7-1500 rail ...................................................................................25
4.6 Wall mounting .........................................................................................................................27
4.7 Changing the position of the securing bar ..............................................................................28
5 Connecting up....................................................................................................................................... 29
5.1 Safety when connecting up.....................................................................................................29
5.2 Wiring rules .............................................................................................................................31
5.3 Power supply ..........................................................................................................................32
5.4 Signaling contact.....................................................................................................................34
5.5 Functional ground ...................................................................................................................36
6 Maintenance and troubleshooting.......................................................................................................... 37
7 Technical specifications ........................................................................................................................ 39
7.1 Technical specifications SCALANCE XC106-2 ......................................................................39
7.2 Technical specifications of the SCALANCE XC108 ...............................................................41
7.3 Technical specifications of the SCALANCE XC116 ...............................................................43
7.4 Technical specifications of the SCALANCE XC124 ...............................................................45
7.5 Mechanical stability (in operation) ..........................................................................................46

Table of contents
SCALANCE XC-100
4Operating Instructions, 06/2016, C79000-G8976-C415-02
8 Certifications and approvals .................................................................................................................. 47
8.1 EU declaration of conformity.................................................................................................. 52
8.1.1 ATEX...................................................................................................................................... 53
8.1.2 EMC ....................................................................................................................................... 53
8.1.3 RoHS...................................................................................................................................... 54
8.1.4 Products ................................................................................................................................. 54
9 Dimension drawings.............................................................................................................................. 55
9.1 SCALANCE XC-100 dimension drawings ............................................................................. 55
Index .................................................................................................................................................... 59

SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02 5
Introduction
1
Purpose of the Operating Instructions
These operating instructions support you when installing and connecting up devices of the
SCALANCE XC-100 product group.
Validity of the Operating Instructions
These operating instructions apply to the following devices:
●SCALANCE XC106-2
●SCALANCE XC108
●SCALANCE XC116
●SCALANCE XC124
Unless mentioned otherwise, the descriptions in these operating instructions refer to all
devices of the SCALANCE XC-100 product group named above in the section on validity.
Designations used
Classification
Description
Terms used
Product line The product line includes all devices and variants of all product groups.
If information applies to all product groups within the product line, the
term SCALANCE X-100 is used.
SCALANCE X-100
Product group If information applies to all devices and variants of a product group, the
term SCALANCE XC-100 is used.
SCALANCE XC-100
Device
If information relates to a specific device, the device name is used.
e.g. SCALANCE XC106-2
Further documentation
In the system manuals "Industrial Ethernet / PROFINET Industrial Ethernet" and "Industrial
Ethernet / PROFINET passive network components", you will find information on other
SIMATIC NET products that you can operate along with the devices of this product line in an
Industrial Ethernet network.
There, you will find among other things optical performance data of the communications
partner that you require for the installation.

Introduction
SCALANCE XC-100
6Operating Instructions, 06/2016, C79000-G8976-C415-02
You will find the system manuals here:
●On the data medium that ships with some products:
–Product CD / product DVD
–SIMATIC NET Manual Collection
●On the Internet pages of Siemens Industry Online Support under the following entry IDs:
–27069465 (http://support.automation.siemens.com/WW/view/en/27069465)
Industrial Ethernet / PROFINET Industrial Ethernet System Manual
–84922825 (http://support.automation.siemens.com/WW/view/en/84922825)
Industrial Ethernet / PROFINET - Passive network components System Manual
SIMATIC NET manuals
You will find the SIMATIC NET manuals here:
●On the data medium that ships with some products:
–Product CD / product DVD
–SIMATIC NET Manual Collection
●On the Internet pages of Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/15247).
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary on the Internet at the following address:
50305045 (http://support.automation.siemens.com/WW/view/en/50305045)
Catalogs
You will find the order numbers for the Siemens products of relevance here in the following
catalogs:
●SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI
●SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog
ST 70
●Industry Mall - catalog and ordering system for automation and drive technology, Online
catalog
(https://eb.automation.siemens.com/goos/WelcomePage.aspx?regionUrl=/en&language=
en)
You can request the catalogs and additional information from your Siemens representative.

Introduction
SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02 7
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. You will find more information about Industrial Security in:
Industrial security (http://www.siemens.com/industrialsecurity)
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. You will find more information about this in
Product support (https://support.industry.siemens.com/cs/ww/en/ps/15247/pm)
Trademarks
The following and possibly other names not identified by the registered trademark sign ®are
registered trademarks of Siemens AG:
SIMATIC NET, SCALANCE, C-PLUG, OLM
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to
the specification.
If you use damaged parts, this can lead to the following problems:
•Injury to persons
•Loss of the approvals
•Violation of the EMC regulations
•Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
Recycling and disposal
The products are low in pollutants and can be recycled. For environmentally friendly
recycling and the disposal of your old device contact a certified disposal company for
electronic scrap.

Introduction
SCALANCE XC-100
8Operating Instructions, 06/2016, C79000-G8976-C415-02
Electrostatic discharge
NOTICE
Electrostatic sensitive devices (ESD)
Electronic modules contain electrostatic sensitive components
These components can easily be destroyed if handled incorrectly.
Note the following instructions to avoid damage.
•Touch electronic modules only when you absolutely need to work on them.
•If electronic modules need to be touched, the body of the person involved must first be
electrostatically discharged and grounded.
•Do not bring electronic modules in contact with electrically isolating materials such as
plastic film, isolating table top pads or clothing made of synthetic fibers.
•Place the modules only on conductive surfaces.
•Pack, store and transport electronic modules and components only in conductive
packaging such as metalized plastic or metal containers, conductive foam or household
aluminum foil.

SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02 9
Safety notices
2
Read the safety notices
Note the following safety notices. These relate to the entire working life of the device.
You should also read the safety notices relating to handling in the individual sections,
particularly in the sections "Installation" and "Connecting up".
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
WARNING
EXPLOSION HAZARD
Do not open the device when the supply voltage is turned on.
Safety notices when using the device according to Hazardous Locations (HazLoc)
If you use the device under HazLoc conditions you must also keep to the following safety
notices in addition to the general safety notices for protection against explosion:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-
hazardous locations only.
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations
only.

Safety notices
SCALANCE XC-100
10 Operating Instructions, 06/2016, C79000-G8976-C415-02

SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02 11
Description of the device
3
3.1
Product overview
Article numbers
Device
Description
Article number
SCALANCE XC106-2 6 x 10/100 Mbps RJ-45 ports, 2 x 10/100 Mbps SC ports, multi-
mode fiber-optic cable
6GK5 106-2BB00-2AC2
SCALANCE XC108
8 x 10/100 Mbps RJ-45 ports
6GK5 108-0BA00-2AC2
SCALANCE XC116 16 x 10/100 Mbps RJ-45 ports 6GK5 116-0BA00-2AC2
SCALANCE XC124
24 x 10/100 Mbps RJ-45 ports
6GK5 124-0BA00-2AC2
Components of the product
The following components are supplied with a SCALANCE XC-100:
●One IE switch
●A 4-pin terminal block for the power supply (spring-loaded terminal)
●A 2-pin terminal block for the signaling contact (spring-loaded terminal)
Spare parts
The following spare parts are available for SCALANCE XC-100:
Component
Description
Order number
Spring-loaded terminal block, 4
terminals
4-terminal spring-loaded terminal block to connect the pow-
er supply (24 VDC),
for SCALANCE X/W/S/M,
pack of 5
6GK5 980-1DB10-0AA5
Spring-loaded terminal block, 2
terminals
2-terminal spring-loaded terminal block to connect the sig-
naling contact (24 VDC),
for SCALANCE X/W/S/M,
pack of 5
6GK5 980-0BB10-0AA5

Description of the device
3.2 Device views
SCALANCE XC-100
12 Operating Instructions, 06/2016, C79000-G8976-C415-02
3.2
Device views
3.2.1
Device view of a SCALANCE XC106-2
The following figure shows an overview of the components of the SCALANCE XC106-2.
①
Electrical ports
②
Optical ports
③
Grounding screw
④
Knurled screw
⑤
Securing bar
⑥
Levering aid for moving the securing bar with a screwdriver
⑦
Power supply
⑧
Signaling contact
⑨
"SET" button
⑩
LED display

Description of the device
3.2 Device views
SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02 13
3.2.2
Device view of a SCALANCE XC108
The following figure shows an overview of the components of the SCALANCE XC108.
①
Electrical ports
②
Grounding screw
③
Knurled screw
④
Securing bar
⑤
Levering aid for moving the securing bar with a screwdriver
⑥
Power supply
⑦
Signaling contact
⑧
"SET" button
⑨
LED display

Description of the device
3.2 Device views
SCALANCE XC-100
14 Operating Instructions, 06/2016, C79000-G8976-C415-02
3.2.3
Device view of a SCALANCE XC116
The following figure shows an overview of the components of the SCALANCE XC106-2.
①
Electrical ports
②
Grounding screw
③
Knurled screw
④
Securing bar
⑤
Levering aid for moving the securing bar with a screwdriver
⑥
Power supply
⑦
Signaling contact
⑧
"SET" button
⑨
LED display

Description of the device
3.2 Device views
SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02 15
3.2.4
Device view of a SCALANCE XC124
The following figure shows an overview of the components of the SCALANCE XC106-2.
①
Electrical ports
②
Grounding screw
③
Knurled screw
④
Securing bar
⑤
Levering aid for moving the securing bar with a screwdriver
⑥
Power supply
⑦
Signaling contact
⑧
"SET" button
⑨
LED display

Description of the device
3.3 LED display
SCALANCE XC-100
16 Operating Instructions, 06/2016, C79000-G8976-C415-02
3.3
LED display
Fault LED "F" (red LED)
The fault LED indicates the incorrect functioning of the device.
LED color
LED status
Meaning
Red Lit The IE switch detects an error. At the same time, the signaling contact opens.
The following faults/errors are detected:
1. Link down event on a monitored port.
2. Loss of the power supply of one of the two redundant power supplies or the pow-
er supply drops below 9.6 V.
3. Both power supplies are below approximately 9.6 V (voltage too low).
-
Off
No error detected.
Power LEDs “L1” and “L2” (green LEDs)
The power LEDs show the status of the power supply at connectors L1 and L2.
L1/L2 LEDs
L1/L2 connector
LED color
LED status
Green
Lit
Power supply L1 or L2 is connected.
-
Off
Power supply L1 and L2 are not connected or L1 and L2 <9.6 V.
Note
If the green LED is not lit, no other signal LED lights up either.
Port LEDs "P" (green/yellow LEDs)
The port LEDs indicate the status of the ports.
LED color
LED status
Meaning
Green
Lit
Link exists, no data reception at port
Yellow
Lit
Link exists, data reception at port
Yellow
Flashing
Setting or display of the fault mask

Description of the device
3.4 SET button
SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02 17
3.4
SET button
Position
The "SET" button is located on the front of the SCALANCE XC-100.
Image 3-1 Position of the "SET" button
Function
With the SET button, you can display and change the set fault mask.
Setting the fault mask
Factory setting
When supplied (factory defaults), the fault mask is set so that the power supply L1+/M1 is
monitored. No ports are monitored.
If you connect a power supply to L2+/M2, adapt the fault mask accordingly: Clear the error
LED and the signaling contact or set the fault mask to the power supply L2+/M2.
Changing the setting
The changed settings remain after cycling power to the device.
Different settings are made depending on how long you hold down the SET button, as
described in the following table:

Description of the device
3.4 SET button
SCALANCE XC-100
18 Operating Instructions, 06/2016, C79000-G8976-C415-02
Phase
Description
1 LEDs flash at 5 Hz The currently set fault mask is displayed. The LEDs of the monitored
ports flash.
If no fault mask is set, all port LEDs flash one after the other.
If you release the button in phase 1, this has no effect.
2 LEDs flash at 2.5 Hz The current status is displayed.
•The LEDs of the ports at which there is currently a link flash.
If you release the button in phase 2, this has no effect.
3
This new status is adopted and stored as the new fault mask in phase 3.
LEDs flashing If you release the SET button while the LEDs are still flashing, storing is
aborted.
LEDs lit If you release the SET button as soon as the LEDs light up, the current
settings will be stored.
The stored status is displayed.
•The monitored ports are indicated by statically lit LEDs.
•The monitored power supply is indicated by statically lit LEDs.
Note
If an empty fault mask is set or needs to be set, the 2 port LEDs flash alternately. If the fault
mask is empty, no port is
monitored.
Error/fault
If the link is lost at a monitored port or a monitored power supply is lost, this is signaled as
follows:
●the red fault LED lights up
●the signaling contact is opened

SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02 19
Mounting
4
4.1
Safety notices for installation
Safety notices
When installing the device, keep to the safety notices listed below.
WARNING
If a device is operated in an ambient temperature of more than 60 °C, the temperature of
the device housing may be higher than 70 °C. The device must therefore be installed so
that it is only accessible to service personnel or users that are aware of the reason for
restricted access and the required safety measures at an ambient temperature higher than
60 °C.
WARNING
If the device is installed in a cabinet, the inner temperature of the cabinet corresponds to
the ambient temperature of the device.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
WARNING
EXPLOSION HAZARD
Replacing components may impair suitability for Class 1, Division 2 or Zone 2.
WARNING
The device is suitable only for operation in the interior.
WARNING
The device may only be operated in an environment with pollution degree 1 or 2 (see IEC
60664-1).

Mounting
4.1 Safety notices for installation
SCALANCE XC-100
20 Operating Instructions, 06/2016, C79000-G8976-C415-02
WARNING
When used in hazardous environments corresponding to Class I, Division 2 or Class I,
Zone 2, the device must be installed in a cabinet or a suitable enclosure.
Safety notices for use according to ATEX and IECEx
If you use the device under ATEX or IECEx conditions you must also keep to the following
safety notices in addition to the general safety notices for protection against explosion:
WARNING
To comply with EC Directive 2014/34/EU (ATEX 114) or the conditions of IECEx, this
enclosure or cabinet must meet the requirements of at least IP54 in compliance with EN
60529.
WARNING
If the cable or conduit entry point exceeds 70 °C or the branching point of conductors
exceeds 80 °C, special precautions must be taken. If the equipment is operated in an air
ambient in excess of 60 ℃, only use cables with admitted maximum operating temperature
of at least 80 ℃.
Further notes
NOTICE
Warming and premature aging of the network component due to direct sunlight
Direct sunlight can heat up the device and can lead to premature aging of the network
component and its cabling.
Provide suitable shade to protect the network component against direct sunlight.