Siemens Albatros RVS46 Series User manual

Edition 3.0
CE1U2353en
2014-07-30
Building Technologies
s
Albatros2
Zone controller
User Manual
RVS46..
AVS75..
AVS37..
QAA75..
QAA78..
QAA55..

2/138
Siemens User Manual CE1U2353en
Building Technologies 2014-07-30

3/138
Siemens User Manual CE1U2353en
Building Technologies 2014-07-30
Contents
1Overview..........................................................................................................9
1.1 Product range overview.................................................................................10
1.1.1 Topology........................................................................................................10
Wired.............................................................................................................10
Wireless.........................................................................................................10
1.1.2 Operating options..........................................................................................11
2Safety notes...................................................................................................12
2.1 Product liability ..............................................................................................12
3Mounting and installation...............................................................................13
3.1 Regulations....................................................................................................13
Electrical installation......................................................................................13
3.2 Basic units RVS….........................................................................................13
Planning.........................................................................................................13
Mounting method...........................................................................................14
Dimensions and drilling plan..........................................................................14
3.2.1 RVS46.530 connection terminals..................................................................15
3.2.2 RVS46.543 connection terminals..................................................................15
Terminal markings.........................................................................................16
3.3 Extension module AVS75.390.......................................................................17
Dimensions and drilling plan..........................................................................17
3.3.1 AVS75.390 connection terminals ..................................................................17
Terminal markings.........................................................................................18
Assignment of terminals................................................................................18
3.4 Operator unit AVS37.294 ..............................................................................19
Mounting method...........................................................................................19
Connections...................................................................................................19
Ground...........................................................................................................19
3.5 Operator unit AVS37.390 ..............................................................................20
Connections...................................................................................................20
Dimensions....................................................................................................20
3.6 Room unit QAA55…......................................................................................21
Planning.........................................................................................................21
Mounting method...........................................................................................21
Connections...................................................................................................21
Dimensions and drilling plan..........................................................................21
3.7 Room unit QAA75…......................................................................................22
Planning.........................................................................................................22
Mounting method...........................................................................................22
Connections...................................................................................................22
Dimensions and drilling plan..........................................................................23
3.8 Wireless components....................................................................................24
3.8.1 Radio module AVS71.390.............................................................................24
Planning.........................................................................................................24
Mounting method...........................................................................................24

4/138
Siemens User Manual CE1U2353en
Building Technologies 2014-07-30
Connection.....................................................................................................24
Radio connection...........................................................................................24
Dimensions and drilling plan..........................................................................24
3.8.2 Room unit QAA78.610...................................................................................25
Planning.........................................................................................................25
Mounting with base........................................................................................25
Connection / power supply.............................................................................26
Radio connection...........................................................................................26
Dimensions and drilling plan..........................................................................27
3.8.3 Wireless outside sensor AVS13.399..............................................................28
Mounting method...........................................................................................28
Radio connection...........................................................................................29
Dimensions and drilling plan..........................................................................29
3.8.4 Radio repeater AVS14.390............................................................................30
Mounting method...........................................................................................30
Connections...................................................................................................30
Radio connection...........................................................................................30
Dimensions and drilling plan..........................................................................30
3.8.5 Checking the wireless components...............................................................31
4Commissioning ..............................................................................................31
4.1 Basic units......................................................................................................31
5Handling.........................................................................................................32
5.1 QAA75.. / QAA78… / AVS37.........................................................................32
5.1.1 Operation.......................................................................................................32
Operating elements........................................................................................32
Display options...............................................................................................33
Selecting heating mode.................................................................................33
Selection of cooling mode..............................................................................34
Selecting DHW heating mode........................................................................34
Adjusting the room temperature setpoint.......................................................34
Occupancy button..........................................................................................35
Displaying information....................................................................................35
5.1.2 Programming .................................................................................................37
Setting principle .............................................................................................37
Example: “Setting the time of day“.................................................................37
5.1.3 User levels.....................................................................................................38
Setting the structure “End user“.....................................................................39
Setting the structure ”Heating engineer“........................................................39
5.1.4 Overview of settings.......................................................................................40
5.2 AVS37.390.....................................................................................................54
5.2.1 Operation.......................................................................................................54
Operating elements........................................................................................54
Display options...............................................................................................54
Selecting the operating mode........................................................................54
Adjusting the room temperature setpoint.......................................................55
Adjusting the nominal DHW setpoint .............................................................55
Displaying information....................................................................................55
Setting principle .............................................................................................56
Example: “Setting the time of day“Error! No bookmark name given..............56

5/138
Siemens User Manual CE1U2353en
Building Technologies 2014-07-30
5.2.2 User levels.....................................................................................................57
5.2.3 Overview of settings......................................................................................58
5.3 QAA55...........................................................................................................59
5.3.1 Operation.......................................................................................................59
Operating elements.......................................................................................59
Display options..............................................................................................59
Selecting heating mode.................................................................................59
Display cooling mode ....................................................................................60
Adjusting the room temperature setpoint.......................................................60
Occupancy button..........................................................................................60
5.3.2 Programming.................................................................................................61
6The settings in detail......................................................................................62
6.1 Time of day and date.....................................................................................62
6.2 Operator section............................................................................................62
Operation and display....................................................................................62
Heating circuit assignment ............................................................................64
Room sensor .................................................................................................64
Device data....................................................................................................64
6.3 Radio.............................................................................................................65
Binding...........................................................................................................65
List of wireless devices..................................................................................65
6.4 Time programs ..............................................................................................65
Switching points.............................................................................................66
Standard program..........................................................................................66
6.5 Holidays.........................................................................................................66
6.6 Heating circuits..............................................................................................66
Operating mode.............................................................................................66
Setpoints........................................................................................................67
Heating curve ................................................................................................67
ECO functions ...............................................................................................68
Flow temperature setpoint limits....................................................................69
Room influence..............................................................................................70
Room temp limitation.....................................................................................71
Boost heating.................................................................................................71
Quick setback................................................................................................72
Optimum start / stop control ..........................................................................73
Raising the reduced setpoint.........................................................................73
Overtemp prot pump circuit ...........................................................................74
Mixing valve control.......................................................................................74
Floor curing function......................................................................................75
Excess heat draw..........................................................................................76
Buffer storage tank / primary controller .........................................................76
Remote control..............................................................................................76
6.7 Cooling circuit................................................................................................77
Operating mode.............................................................................................77
Setpoints........................................................................................................77
Release .........................................................................................................77
Cooling curve.................................................................................................77
ECO...............................................................................................................78
Summer compensation..................................................................................78

6/138
Siemens User Manual CE1U2353en
Building Technologies 2014-07-30
Flow temperature setpoint limits....................................................................79
Room influence..............................................................................................79
Room temp limitation.....................................................................................80
Mixing valve control .......................................................................................81
Dewpoint monitoring......................................................................................81
Buffer storage tank / primary controller..........................................................83
Remote control...............................................................................................83
6.8 DHW ..............................................................................................................83
Setpoints........................................................................................................83
Release..........................................................................................................84
Priority............................................................................................................84
Legionella function.........................................................................................85
Circulating pump............................................................................................85
6.9 Hx pumps.......................................................................................................86
Hx pumps.......................................................................................................86
6.10 Primary controller / system pump ..................................................................86
Primary controller / system pump ..................................................................86
6.11 Solar...............................................................................................................87
Charging controller (dT).................................................................................87
Start function..................................................................................................87
Frost protection for the collector ....................................................................87
Overtemperature protection for the collector .................................................88
Medium’s evaporation temperature ...............................................................88
Yield measurement........................................................................................88
6.12 DHW storage tank..........................................................................................89
Charging control.............................................................................................89
Overtemperature protection...........................................................................89
Recooling.......................................................................................................89
Electric immersion heater ..............................................................................90
Excess heat draw...........................................................................................91
Plant hydraulics..............................................................................................91
6.13 Instantaneous DHW heater............................................................................91
Mixing valve control .......................................................................................91
6.14 Configuration..................................................................................................92
Heating circuits ..............................................................................................92
DHW sensor B3 .............................................................................................93
DHW control element Q3...............................................................................93
Output relay QX.............................................................................................93
Input sensor BX .............................................................................................95
Input H1 .........................................................................................................96
Mixing valve groups basic unit.....................................................................100
Extension module ........................................................................................101
QX extension module...................................................................................102
BX extension module...................................................................................102
H2 extension module...................................................................................102
Types of sensor/readjustment......................................................................103
Building and room model.............................................................................103
Frost protection for the plant........................................................................103
External requirements..................................................................................104
Air dehumidifier............................................................................................104
Sensor state.................................................................................................105
Parameter reset...........................................................................................105
Plant diagram...............................................................................................105

7/138
Siemens User Manual CE1U2353en
Building Technologies 2014-07-30
Device data..................................................................................................106
6.15 LPB system .................................................................................................106
Address / power supply...............................................................................106
Central functions..........................................................................................107
Clock............................................................................................................108
6.16 Faults...........................................................................................................109
6.17 Maintenance / special mode........................................................................109
Maintenance functions.................................................................................109
Manual operation.........................................................................................110
Simulations..................................................................................................110
Telephone customer service .......................................................................111
6.18 Input / output test.........................................................................................111
6.19 State............................................................................................................112
Messages....................................................................................................112
6.20 Diagnostics, heat generation.......................................................................114
6.21 Diagnostics, consumers ..............................................................................114
6.22 List of displays.............................................................................................115
6.22.1 Error code....................................................................................................115
6.22.2 Maintenance code.......................................................................................116
6.22.3 Special operation code................................................................................116
7Plant diagrams.............................................................................................117
7.1 Basic diagrams............................................................................................117
7.1.1 Basic diagram RVS46.543 ..........................................................................117
7.1.2 Basic diagram RVS46.530 ..........................................................................117
7.2 Extra functions in general............................................................................118
Solar ...........................................................................................................118
DHW storage tank (DHW)...........................................................................118
Heating/cooling circuit .................................................................................119
Heat converter.............................................................................................119
Extra functions.............................................................................................119
7.3 Extra functions with extension module AVS75.390.....................................120
2. Mixing valve heating circuit......................................................................120
Cooling circuit..............................................................................................120
Solar DHW heating......................................................................................120
Primary controller ........................................................................................121
Primary DHW controller...............................................................................121
Instantaneous DHW heater.........................................................................121
Legend mains voltage .................................................................................122
Legend low-voltage .....................................................................................122
8Technical data .............................................................................................123
8.1 Basic units RVS….......................................................................................123
8.2 Extension module AVS75.390.....................................................................125
8.3 Operator unit and room units AVS37... / QAA7x… / QAA55.......................126
8.4 Power supply AVS16.290............................................................................128
8.5 Radio module AVS71.390...........................................................................129
8.6 Wireless outside sensor AVS13.399...........................................................130

8/138
Siemens User Manual CE1U2353en
Building Technologies 2014-07-30
8.7 Radio repeater AVS14.390..........................................................................131
8.8 Sensor characteristics..................................................................................132
8.8.1 NTC 1 k........................................................................................................132
8.8.2 NTC 10 k......................................................................................................133
8.8.3 PT1000 ........................................................................................................133
9Revision history............................................................................................137

9/138
Siemens User Manual CE1U2353en
Building Technologies Product range overview 2014-07-30
1 Overview
The present User Manual describes the products listed in the following table and covers
handling and configuration of the controls for readers ranging from end users to heating
engineers.
Type reference
(ASN) Series Name
RVS46.530 A Basic unit zone
RVS46.543 B Basic unit zone
AVS75.390 B Extension module
AVS37.294 B Operator unit
AVS37.390 A Operator unit basic
QAA75.610 B Room unit, wired
QAA75.611 B Room unit with backlight, wired
QAA78.610 B Room unit, wireless
QAA55.110 B Room unit basic
AVS16.290 A Power section
AVS71.390 A Radio module
AVS14.390 A Radio repeater
AVS13.399 A Wireless outside sensor
The following products are described in separate pieces of documentation:
QAC34 Outside sensor NTC 1 kΩ
QAD36 Strap-on temperature sensor NTC 10 kΩ
QAZ36 Immersion temperature sensor NTC 10 kΩ

10/138
Siemens User Manual CE1U2353en
Building Technologies Product range overview 2014-07-30
1.1 Product range overview
1.1.1 Topology
Wired Remote
Service Tool
Mobile, SMS, Pager, Fax,
WEB,
Telephone
Network
Telephone
SMS
OCI611
OCI700
ACS700
BSB : Boiler System Bus
Room
Unit Service Unit
(RU)
HMI
HMI
(RU)
wired
wired
wired
Basic Unit
RVSxx Extension
mod. AVS75…
(max. 2)
BSB-W
LPB : Local Process Bus
Basic Unit
RVS...
LPB
Wireless Remote
Service Tool
Mobile, SMS, Pager,Fax,
WEB,
Telephone
Network
Telephone
SMS
OCI611
OCI700
RF
module
ACS700
BSB: Boiler System Bus
Room
Unit
RF
Repeater
RF
Toutside
BSB-RF
Service Unit
(RU)
HMI
(RU)
wireless wireless wireless
Basic Unit
RVSxx Extension
mod. AVS75…
(max. 2)
BSB-W
LPB : Local Process Bus
Basic Unit
RVS...
LPB

11/138
Siemens User Manual CE1U2353en
Building Technologies Product range overview 2014-07-30
1.1.2 Operating options
Wired Wireless
C
D
A
2359Z01
T
C
DF
A
2359Z03
T
C
E1
D
A
2359Z66
T
C
DF
A
2359Z67
T
E1
C
E
D
A
2359Z02
T
C
DF
A
E
2359Z04
T
ABasic unit RVS…
CRoom unit QAA75… / 78… / QAA55..
DOutside sensor AVS13…
EOperator unit AVS37.294 (clear-text)
E1 Operator unit AVS37.390 (basic)
F Radio module AVS71…
Operation with room
unit
Operation with “basic”
operator unit
(optionally with additional
room unit)
Operation with “clear-text”
operator unit
(optionally with additional room
unit)

12/138
Siemens User Manual CE1U2353en
Building Technologies Product liability 2014-07-30
2 Safety notes
2.1 Product liability
·The products may only be used in building services plant and applications as
described in this document
·When using the products, all requirements specified in the chapters on "Handling"
and "Technical data" must be satisfied
·The local regulations (for installation, etc.) must be complied with
·Do not open the units. If not observed, warranty becomes void.

13/138
Siemens User Manual CE1U2353en
Building Technologies Regulations 2014-07-30
3 Mounting and installation
3.1 Regulations
Electrical installation
·Prior to installing the units, power must be turned off
·The connections for mains and low-voltage are separated
·The wiring must be made in compliance with the requirements of safety class II. This
means that sensor and mains cables must not be run in the same duct
3.2 Basic units RVS…
Planning
·Air circulation around the controller must be ensured, allowing the unit to emit the
heat produced by it.
A clearance of at least 10 mm must be provided for the unit's cooling slots at the top
and bottom of the housing.
That space should not be accessible and no objects should be placed there. If the
controller is enclosed in another (insulating) casing, a clearance of up to 100 mm
must be observed around the cooling slots
·The controller is designed conforming to the directives for safety class II devices
mounted in compliance with these regulations
·Power to the controller may only be supplied when completely fitted. If this is not
observed, there is a risk of electric shock hazard near the terminals and through the
cooling slots
·The controller must not be exposed to dripping water.
·Permissible ambient temperature when mounted and when ready to
operate: 0…50°C.
·Power cables must be clearly segregated from low-voltage cables (sensors)
observing a distance of at least 100 mm
·Boiler
·Control panel
·Housing for wall mounting
Mounting location

14/138
Siemens User Manual CE1U2353en
Building Technologies Basic units RVS… 2014-07-30
2359Z10
x
Mounting method Screwed On DIN rail
2359Z09
A1
A2
B1 B2 2359Z11
A: Mounting / B: Removal
Hinweis:
To mount the controller on a DIN rail, a mounting clip
is required!
Dimensions and drilling plan L
B
L1
B1
2358M01
L B H L1 B1
RVS46.543 181 121 52 170 110
RVS46.530 109 121 52 98 110
Masse X:
Connectors with tongues minimum 70 mm
Connector without tongues minimum 60 mm
Total height required
Dimensions in mm

15/138
Siemens User Manual CE1U2353en
Building Technologies Basic units RVS… 2014-07-30
3.2.1 RVS46.530 connection terminals
2353Z02
060706A
000020RVS46.530/109
1PRVS46.530/109
S060706000020
3.2.2 RVS46.543 connection terminals
2353Z01
060404A
000020RVS46.543/109
1PRVS46.543/109
S060404000020

16/138
Siemens User Manual CE1U2353en
Building Technologies Basic units RVS… 2014-07-30
Terminal markings Use Space Connector type
LLive AC 230 V basic unit N L AGP4S.03E/109 3)
Protective earth AGP4S.05A/109 4)
NNeutral conductor
N Neutral conductor R AGP8S.03A/109
Protective earth
Q3 DHW charging pump / diverting valve
NNeutral conductor S AGP8S.03B/109
Protective earth
Q2 1. heating circuit pump
Y1 1st heating circuit mixing valve opening T AGP8S.04B/109
NNeutral conductor
Protective earth
Y2 1st heating circuit mixing valve closing
NNeutral conductor U AGP8S.03C/109
Protective earth
QX1 1. Multifunctional output
Use Space Connector type
BSB Service tool OCI700 - -
LPB
system Local process bus - -
X60 Radio module AVS71.390 - -
X50 Extension module AVS75.390 - AVS82.490/109
X30 Operator unit / control panel - AVS82.491/109
DB LPB data a AGP4S.02H/109
MB LPB ground
CL+ BSB data AGP4S.02A/109
CL- BSB ground b
CL+ Room unit 1 data AGP4S.02A/109
CL- Room unit 1 ground b AGP4S.03D/109
G+ Room unit power supply 12 V
B3 DHW sensor top AGP4S.02C/109
MGround h
B9 Outside sensor AGP4S.03F/109 3)
MGround k AGP4S.02D/109 4)
H1 Digital / DC 0...10 V input AGP4S.02F/109
MGround n
B1 Flow sensor heating circuit 1 AGP4S.02G/109
MGround p
BX1 Multifunctional sensor input 1 AGP4S.02F/109
MGround n
BX2 Multifunctional sensor input 2 AGP4S.02F/109
MGround n
3) RVS46.530
4) RVS46.543
Mains voltage
Low voltage

17/138
Siemens User Manual CE1U2353en
Building Technologies Extension module AVS75.390 2014-07-30
3.3 Extension module AVS75.390
For planning, mounting location and mounting method, refer to the information given for
the basic modules.
Dimensions and drilling plan L
B
L1
B1
2358M01
L B H L1 B1
AVS75.390 109 121 52 98 110
The AVS75.390 extension module is connected to terminal X50 of the basic unit using
the AVS83.490/109 connecting cable. The connectors are coded.
3.3.1 AVS75.390 connection terminals
050110A
000020AVS75.390/109
1PAVS75.390/109
S050110000020
2359Z49
Connections
112 = Modul 1
212= Modul 2
Dimensions in mm

18/138
Siemens User Manual CE1U2353en
Building Technologies Extension module AVS75.390 2014-07-30
Terminal markings Use Space Connector type
LLive AC 230 V basic unit N L AGP4S.03E/109
Protective earth
NNeutral conductor
QX21 Assignment according to function T AGP8S.04B/109
NNeutral conductor
Protective earth
QX22 Assignment according to function
NNeutral conductor S AGP8S.03B/109
Protective earth
QX23 Assignment according to function
Use Space Connector type
X30 Operator unit / control panel - AVS82.491/109
X50 Basic unit AVS82.490/109
BX21 Assignment according to function AGP4S.02F/109
MGround n
BX22 Assignment according to function AGP4S.02F/109
MGround n
H2 Digital / DC 0...10 V input AGP4S.02F/109
MGround n
Assignment of terminals The two parameters
·Function extension module 1 (operating line 6020)
·Function extension module 2 (operating mode 6021)
define the usage of the respective module.
Mains voltage
Low voltage

19/138
Siemens User Manual CE1U2353en
Building Technologies Operator unit AVS37.294 2014-07-30
3.4 Operator unit AVS37.294
Mounting method Installation Removal
2358Z30
2358Z31
2358Z32
Connections The AVS37.294 operator unit must be connected to terminal X30 of the basic unit using
the AVS82.491/109 connecting cable. The connectors are coded.
Ground
(144)
0.5...3.0
92+0.8
0
138+1 0
2358M05 (96)
Panel cutout
2358M03
144
96 90
27
42.4
17

20/138
Siemens User Manual CE1U2353en
Building Technologies Operator unit AVS37.390 2014-07-30
3.5 Operator unit AVS37.390
Connections The AVS37.390 operator unit must be connected to terminal X30 of the basic unit using
the AVS82.491/109 connecting cable. The connectors are coded.
Dimensions
2354M01
13
0,5 A
AControl panel, front