Siemens WN34A140 User manual

Washer dryer
WN34A140 WN34A190
siemens-home.bsh-group.com/welcome
de register
your
product
on-line
Translated from German to English - www.onlinedoctranslator.com

Your new washer-dryer Presentation rules
: Warning!
You have chosen a Siemens washer-dryer.
This combination of symbol and signal
word indicates a
possibly dangerous situation. Failure to
observe can result in death or injury.
Please take a few minutes to read and get
to know the advantages of your washer-
dryer.
In order to meet the high quality standards
of the Siemens brand, every washer-dryer
that leaves our factory has been carefully
checked to ensure that it functions correctly
and is in perfect condition.
Caution!
This signal word indicates a possibly
dangerous situation. Failure to observe
can lead to property and / or
environmental damage.
Further information on our products,
accessories, spare parts and services
can be found on our website
www.siemens-home.bsh- group.com or
contact our customer service centers.
Note / tip
Notes on the optimal use of the device /
useful information.
1. 2. 3. / a) b) c)
If the operating and installation
instructions describe different models, the
differences will be pointed out at the
appropriate places.
Action steps are represented by numbers
or letters.
■/ -
Lists are represented by a box or a
dash.
Do not start up the washer-dryer until you
have read these operating and installation
instructions!
2

de
contents enUsing and installation instructions
8th Intended Use
4th
C. Detergents and care products. . . . . . 27
Recommended detergent. . . . . . . . . .28
( Safety instructions . . . . . . . . . .5 P. Program overview. . . . . . . . . . 29
Children / people / pets. . . . . . . . 5
Installation. . . . . . . . . . . . . . . . . . . . . . 6
Operation. . . . . . . . . . . . . . . . . . . . . . . . 8
Cleaning / maintenance. . . . . . . . . . . . . . 10
Selectable program. . . . . . . . . . .29 Drying
table. . . . . . . . . . . . . . .33
0 Program preferences. . . 34
7th Environmental Protection. . . . . . . . . . . . . . .12 Temp. ° C. . . . . . . . . . . . . . . . . . . . . .34
Spin. . . . . . . . . . . . . . . . . . . .34 Finished
in. . . . . . . . . . . . . . . . . . . . . .34
Packaging / old device. . . . . . . . . . . . . 12
Saving energy and resources. . . 12 Energy
saving mode. . . . . . . . . . . . . . 12th \ Additional program settings
gen. . . . . . . . . . . . . . . . . . . . . . . 35
5 Positioning and connecting 13 dry Ô. . . . . . . . . . . . . . . . . . . 35
Prewash. . . . . . . . . . . . . . . . . . . .35 Anti-
crease. . . . . . . . . . . . . . . . . . .35
varioSpeed. . . . . . . . . . . . . . . . . . . .36
Scope of delivery. . . . . . . . . . . . . . . . . . . 13
Safety information. . . . . . . . . . . . . 13
Installation area. . . . . . . . . . . . . . . . . . 14th
Installation on a base or wooden
floor. . . . . . . . . . . . . . . . . . . . . . . . 14th 1 Operate the device. . . . . . . . . . . . . 36
Installation of the device in a kitche-
nette. . . . . . . . . . . . . . . . . . . . . . . . . 14th Prepare the device. . . . . . . . . . . . . . . .36
Remove the transport locks. . . . 15
Removing the support struts. . . . . . . . 16
hose and cable lengths. . . . . 16 water
inlet. . . . . . . . . . . . . . . . . . 17
Drainage. . . . . . . . . . . . . . . . . . 18
Align. . . . . . . . . . . . . . . . . . . . . 19 Electrical
connection. . . . . . . . . . . 19 Before washing
for the first time. . . . . . . . . 20
Transport. . . . . . . . . . . . . . . . . . . . . 20th
Select program / switch on device
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Put laundry into the drum. . .37
Measure and add detergent and care
products. . . . . . . . . . . . . . . . . . . . . . .37
Start the program. . . . . . . . . . . . . . .38
Parental controls. . . . . . . . . . . . . . . .39
Adding / removing laundry. . . . .39
Changing the program. . . . . . . . . . . . . . .39
Program termination. . . . . . . . . . . . . .39 End
of program. . . . . . . . . . . . . . . . .40
*Get to know the device. . . . 22nd Remove laundry / switch off the appliance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Device. . . . . . . . . . . . . . . . . . . . . . . . . 22
Control Panel. . . . . . . . . . . . . . . . . . . . . 23
Display panel. . . . . . . . . . . . . . . . . . . . 24 Q Device settings. . . . . . . . . 41
H Sensors. . . . . . . . . . . . . . . . . . 41
Z Laundry . . . . . . . . . . . . . . . . . . . .25
Prepare laundry for washing. . 25
Preparing laundry for drying. 26
strengths. . . . . . . . . . . . . . . . . . . . . . . 26
Dyeing / decolorizing. . . . . . . . . . . . . . . 26
Imbalance control system. . . . . . . . . .41
3

de Intended Use
2 Cleaning and maintenance. . . . . . . . 42 8th Intended
Machine housing / control panel. . . . 42
washing drum. . . . . . . . . . . . . . . . . 42
Descaling. . . . . . . . . . . . . . . . . . . . . 42
ßer use
This device is intended exclusively for
use in private households and in the
domestic environment. Do not set up
or operate this device in areas where
there is a risk of frost and / or
outdoors. Residual water in the device
can freeze and damage the device.
Frozen hoses can tear / burst. Use this
appliance only for household washing
and machine-washable textiles and
hand-washable wool (see textile label).
Any further use is considered improper
and is prohibited.
Use this appliance only for drying and
freshening up in the household and for
textiles that have been washed with
water and that are suitable for tumble
drying (see textile label). Any further
use is considered improper and is
prohibited.
This device is suitable for use with tap
water and commercially available
detergents and care products (must be
designed for use in washing machines).
This device is for use up to a height of
at most
4000 meters above sea level
determined.
Empty the detergent drawer, clean the
detergent drawer and its
housing. . . . . . . . . . . . . . 43
Intended Use ■
The drain pump is blocked. . . . . . . 43 The
drain hose on the siphon is blocked. 44 The
filter on the water inlet is blocked. . . . 45
■
3 Faults and remedial measures
men. . . . . . . . . . . . . . . . . . . . . . 46 ■
Emergency release. . . . . . . . . . . . . . . . 46
Information on the display panel. . . . . . . . . 47
Errors and measures to remedy
them. . . . . . . . . . . . . . . . . . . . . . . . . 48
4th Customer service . . . . . . . . . . . . . . 53
Product number (E no.) And production
number (FD). . . . . . . . . . . . . 53
■
[ Consumption values. . . . . . . . . . . . 54
J Technical specifications. . . . . . . . . . . 55
r Aqua-Stop guarantee. . . . . . . . . 55 ■
■
Before you start using the device:
Check the device for visible damage. Do
not operate a damaged device. If you have
any complaints, inform your specialist
dealer or our customer service.
Read the operating and installation
instructions and all other information
enclosed with this device and act
accordingly.
Retain the documents for later use or for
the next owner.
4th

safety instructions de
( safety instructions ■Do not allow children to
carry out cleaning or
maintenance work on this
device without supervision.
Keep children under the
age of 3 and pets away
from this device.
Do not leave the device
unattended when children
or people who cannot
assess the dangers are
nearby.
Sure hi tshi nwei se The following safety instructions and
warnings are intended to protect you and those
around you from injury and property damage
maintain.
■
Nevertheless, never neglect
the necessary caution and care
during the installation,
maintenance, cleaning and
operation of the device.
■
: warning
Risk of death!
Children / people / pets
: warning
Risk of death!
Children can lock themselves in
devices and endanger their
lives.
Children and people who are
unable to assess the dangers
involved in using the device
can get into life-threatening
situations or injure
themselves. Therefore please
note:
■Do not place the appliance
behind a door that blocks
or prevents the appliance
door from opening.
■Pull out the power plug on
disused devices and cut
them thereafter the power
cord and destroy the lock on
the appliance door.
■This device can be used by
children from 8 years of age
and by persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they are supervised or
with regard to safety
Have been instructed in the
use of the device and
understand the resulting
dangers.
Children are not allowed to
play with this device.
: warning
Suffocation hazard!
When playing, children can
become wrapped in
packaging / foils and
packaging parts or pull them
over their heads and suffocate.
Keep packaging, foils and
packaging parts away from
children.
■
5

de safety instructions
: warning
Risk of poisoning!
■The device must not be
supplied via an external
switching device, such as a
timer, or connected to a
circuit.
which is regularly switched
on and off by the energy
supplier. The mains plug and
the protective contact socket
must match
and the grounding system
must be installed according to
regulations.
The installation must have a
sufficiently large cable cross-
section. The power plug
must be freely accessible at
all times. If this is not
possible, a switch (2-pole
disconnection) must be
installed in the fixed
installation in accordance
with the regulations for the
Electrical installation.
When using a residual
current circuit breaker, only
one type with the symbol
z can be used. Only this
symbol guarantees
compliance with the current
regulations.
Detergents and care
products can cause
poisoning when consumed.
If accidentally swallowed, seek
medical advice. Keep
detergents and care products
out of the reach of children. ■
: warning
Eye / skin irritation!
Contact with detergents and
care products can cause eye /
skin irritation.
In the event of contact with
detergent / care products,
rinse your eyes or skin
thoroughly. Keep detergents
and care products out of the
reach of children.
■
■
installation
: warning
Risk of electric shock / risk of fire /
damage to property and
equipment! ■
Improper installation of the
device is dangerous. Make sure
that:
■The mains voltage at your
socket and the voltage
information on the device
(Device label) must match.
The connection values and
the required fuse are
specified on the rating plate.
6th

safety instructions de
: warning
Risk of electric shock / risk of fire /
damage to property and
equipment!
: warning
Risk of injury / damage to
property and equipment!
■The device can vibrate or
move during operation and
cause injury or property
damage.
Set up the device on a clean,
level and firm surface and
align it with the screw feet
using a spirit level.
Modifying or damaging the
power cord of the device can
lead to electric shock, short
circuit or fire due to
overheating.
The power cord must not be
kinked, crushed or modified
and must not come into
contact with heat sources.
V ■ redeem B.ngsg eefah i r m/ Material u A.nd G nguess Hesc ehade b n! en or slide
: warning
Fire hazard / property and
equipment damage!
If the appliance is on
protruding components
(eg appliance door), the
components can break off
and cause injuries.
Do not move the device by
protruding parts.
The use of extension cables or
multiple sockets can lead to
fire due to overheating or
short circuits.
Connect the device directly to a
properly installed and earthed
socket. Do not use extension
cables, multiple plugs or
Multiple couplings.
: warning
Risk of injury!
■You could injure yourself
when lifting the device due
to the heavy weight. Do not
lift the device alone.
ngsg i e e ear! you could cut
your hands on the sharp
edges of the device.
Do not take hold of the
device by the sharp edges
and use protective gloves.
V ■ redeem S. f
Risk of injury!
7th

de safety instructions
■Incorrect routing of the hose
and power lines poses a risk
of tripping and injury. Lay
hoses and lines so that there
is no risk of tripping.
■The device is secured with
transport locks for
transport. not
Removed transport locks
can damage the device
during operation.
Before using the device for
the first time, it is imperative
that you completely remove
all transport locks. Keep the
backups. It is imperative that
you reinstall the fuses
before each transport in
order to avoid transport
damage.
Caution!
Property and equipment damage
■Too low or too high a water
pressure can impair the
function of the device and
lead to property and device
damage.
Make sure that the water
pressure in the water supply
system is at least 100 kPa (1
bar) and a maximum of 1000
kPa (10 bar).
en Changing or
damaging the water hoses
can lead to property and
equipment damage.
The water hoses must not
be kinked
crushed, altered or cut
through.
en Using non-original
hoses to connect to the
water supply can lead to
damage to property and
equipment.
Use only the hoses supplied
or original replacement
hoses.
operation
: warning
Risk of explosion and fire!
S. ■ oh-no D.d Ge a councils s shame V Laundry that has been treated
with solvents, oil, wax, wax
remover, paint, grease or
Contact with the stain
remover may ignite if it dries
or cause the device to
explode. Therefore please
note:
S. ■ oh-no D.d Ge a councils s shame V
■Rinse the laundry
thoroughly with hot water
and detergent before drying.
■Do not dry unwashed
laundry in this appliance.
■Do not use the appliance if
industrial chemicals have
been used to clean the
laundry.
Property and equipment damage
8th

safety instructions de
: warning
Risk of explosion and fire!
■The last part of the drying
cycle is done without heat
(cool down cycle) to ensure
that the laundry remains at
a temperature that does not
damage the laundry.
Do not switch off the
appliance before the end of
the drying cycle, unless all
items of laundry are
immediately removed and
spread out (to give off heat).
■Laundry pretreated with
cleaning agents containing
solvents, eg stain remover /
benzine, can cause an
explosion in the drum.
Rinse the laundry
thoroughly with water
before washing.
ns- u i n n B. i ra G dg e drive!
Objects can ignite when
drying and cause the device
to explode or fire.
Remove lighters and
matches from the pockets
of the fabrics.
ns- u t n a Br u nd b efahr v ! Coal
or flour around the device
can cause an explosion.
Make sure that the area
around the device is kept
clean during operation.
■
E. ■ xplosio E. thin
:warning
Risk of poisoning!
Cleaning agents containing
solvents, such as benzine, can
produce poisonous fumes.
Do not use cleaning agents
that contain solvents.
E. ■ xplosio S. dag
: warning
Risk of injury!
■When propping up / sitting down
: warning
Fire hazard / property and
equipment damage!
The appliance can tip over
on the open door and cause
injuries.
Do not lean on the open
appliance door.
Aborting the program before the
end of the drying cycle prevents
the laundry from cooling down
sufficiently and can cause the
laundry to catch fire or damage
to property and equipment.
V ■ redeem B. e!ngsg e fah i r m Stepping on
the appliance can break the
worktop and cause injury.
Do not step on the
device.
Risk of injury!
9

de safety instructions
■Reaching into the rotating
drum can injure your hands
come.
Wait until the drum stops
rotating.
Caution!
Property and equipment damage
■Exceeding the maximum
load
impairs the function of the
device or leads to property
and device damage.
Do not exceed the
maximum load with dry
laundry.
Please note the maximum
load of the programs.
d G c advises H NS a goodbye u n
Plastic or foam rubber can
deform or melt while
drying.
Do not dry any laundry that
has foam or
Contains foam rubber.
d G i he n tesc F. ad e n Dosing
detergents and cleaning agents
can lead to damage to property
and equipment.
Use detergents, care products,
cleaning agents and fabric
softeners according to the
manufacturer's instructions.
: warning
Risk of scalding!
When washing at high
temperatures, contact with hot
detergent may cause
For example, when pumping
out hot detergent solution
into a wash basin, scalding
occurs.
Do not reach into the hot
detergent solution.
S. ■ oh-no S. ee
: warning
Eye / skin irritation!
When opening the detergent
drawer during the
The company can spray
detergent / care agent.
In the event of contact with
detergents / care products,
rinse your eyes or skin
thoroughly. If it is accidentally
swallowed, seek medical advice.
S. ■ oh-no E. uh
Cleaning / maintenance
: warning
Risk of death!
The device is operated with
electrical power. Contact with
live parts poses a risk of
electric shock. Therefore
please note:
10

safety instructions de
■Turn off the device.
Disconnect the device from
the power supply (pull out
the plug).
Never touch the power plug
with wet hands. Pull the
power plug and never the
power cord, as the power
cord could be damaged.
The device and the
properties of the device
must not be technically
changed.
Repairs and interventions or a
change of the power line (if
necessary) may only be carried
out by customer service
or a qualified electrician.
A replacement power cord is
available from customer
service.
: warning
Risk of injury / damage to
property and equipment!
The use of non-original spare
parts and accessories is
dangerous and can lead to
injuries as well as property and
equipment damage.
For safety reasons, only use
original spare parts and
accessories.
■
■
■
Caution!
Property and equipment damage
■Detergents and agents for
pretreating laundry (eg stain
removers, prewash sprays, ...)
can damage the surface of the
appliance if they come into
contact with them. Therefore
please note:
■
■Do not allow these agents to
come into contact with the
surfaces of the device.
■Only clean the device with
water and a soft, damp
cloth.
■Remove all detergent
residues, spray residue or
residues immediately.
: warning
Risk of poisoning!
Cleaning agents containing
solvents, such as benzine, can
produce poisonous fumes.
Do not use cleaning agents
that contain solvents.
: warning
Risk of electric shock / property and
device damage!
Penetrating moisture can cause
a short circuit. Do not use high
pressure cleaners, steam jets,
hoses or showers to clean your
device.
11

de environmental Protection
7th environmental Protection
Reduce the washing temperature for
lightly and normally soiled laundry.
Environmental ProtectionPackaging / old device ■The device uses less energy at low
temperatures. For light to normal
soiling, temperatures lower than those
indicated on the care label are
sufficient.
)Dispose of packaging in an environmentally
friendly manner.
This device is marked in
accordance with the European
Directive 2012/19 / EC on waste
electrical and electronic
equipment (WEEE).
The guideline provides the
framework for the EU-wide return
and recycling of old devices.
Wenn then put the laundry in
If the tumble dryer is to be dried, set the
maximum spin speed.
■Drier laundry shortens the duration of
the drying program and thus lowers
energy consumption. The higher the
spin speed, the lower the residual
moisture in the laundry. At the same
time, the volume of the spinning noise
increases.
Save energy and resources
If these guidelines are followed, the device
uses less electricity and water.
Wash the laundry without prewash.
■Washing with prewash extends the
duration of the program and increases
energy and water consumption.
Use programs with low temperatures and
longer washing times and utilize the
maximum load capacity ~ Page 29.
The device is equipped with an automatic
volume control.
■The automatic amount adjusts the
water consumption and the program
duration optimally to the type of textile
and the load.
■The energy and water consumption is
the most efficient.
Use economical program settings.
■When the program settings are
adjusted for a program, the
expected consumption is shown on
the display.
power saving mode
If the device is not used for a longer period
of time (approx. 5 minutes), it will
automatically switch to energy-saving
mode. Before the start of the program and
after the end of the program, the display
panel illumination goes out, À flashes.
Touch any area of the display panel to
activate the display backlight.
Dose the detergent according to the
degree of soiling of the laundry ~ Page
28.
■A smaller amount of detergent is
sufficient for light to normal soiling.
Observe the dosage recommendation
of the detergent manufacturer. The energy-saving mode is not activated
while the program is running.
12th

Positioning and connecting de
5 Positioning and
Connect
B. Bag:
■Instructions for use and
installation
Customer service center
directory *
Guarantee*
Supplement to the instructions for
use and installation *
Cover caps for openings after
removing the transport locks
Installation instructions for
Home Connect *
■
Positioning and connections L.nscope of delivery
■
■
Note: Check the device for transport
damage. Never use a damaged device. If
you have any complaints, please contact
the dealer from whom you purchased the
device or our customer service.
■
■
C. Water inlet hose on the Aquastop
model
Water drainage hose
Elbow to fix the water drainage
hose *
Cold water inlet hose on Standard /
Aqua-Secure models, depending on
the model
D.
E.
F.
*
Additionally a hose clamp ∅ 24 - 40
mm (specialist retailer) is required
when connecting the water drainage
hose to a siphon.
Useful tool
■
■
Spirit level for aligning wrench
with:
- SW13 for releasing the transport
locks and
- SW17 for aligning the device feet
safety instructions
: warning
Risk of injury!
A. Power line ■The device is heavy. Be careful when
lifting / moving the device.
If the device is lifted by protruding
components (eg the filler door), the
components can break off and cause
injuries. Do not lift the device by the
protruding components.
■
13

de Positioning and connecting
■Incorrect laying of the hose and power
lines creates the risk of tripping and
injury. Lay hoses and lines so that there
is no risk of tripping.
Installation on a base or
wooden floor
Caution!
Equipment damage
The appliance can wander during the spin
cycle and tip / fall from the base. The
device feet must be fastened with
retaining straps.
Order no. WMZ 2200, WX 975600, CZ
110600, Z 7080X0.
Caution!
Equipment damage
Frozen hoses can tear / burst.
Do not set up the device in areas at risk of
frost and / or outdoors. Note: In the case of wooden beam
ceilings, set up the device:
■if possible in a corner,
■on a water-resistant wooden board
(min. 30 mm thick) that is firmly
screwed to the floor.
Caution!
Water damage
The connection points of the water inlet
and water outlet hose are under high
water pressure. In order to avoid leakage
or water damage, it is essential to observe
the information in this chapter!
Setting up the device in a
kitchenette
: warning
Risk of death!
Hints
■In addition to the information listed
here, special regulations of the
responsible water and electricity
company may apply. If in doubt, have
a specialist connect it.
Contact with live parts creates the risk
of electric shock.
Do not remove the cover plate from the
device.
■
Hints
■Niche width of 60 cm required.
Only set up the device under a
continuous worktop that is firmly
connected to the neighboring cabinets.
Installation area
■
Note: The device must be aligned in a
stable manner so that it does not move.
The installation surface must be firm
and level.
Soft floors / floor coverings are
unsuitable.
■
■
14th

Positioning and connecting de
Remove transport locks 2. Loosen and remove all 4 transport
locking screws.
Caution!
Equipment damage
■The device is secured with transport
locks for transport. If the transport
locks are not removed, the device can
be damaged during operation.
Before using the device for the first time,
it is essential that you completely remove
all 4 transport locks. Keep the locks in a
safe place.
In order to avoid transport damage
during subsequent transport, it is
essential that you reinstall the fuses
before transport.
a) Take the power cord out of the
brackets.
■
Note: Save screws and sleeves.
b) Remove the sleeves.
1. Take the hoses out of the holders.
3. Insert covers.
15th

de Positioning and connecting
4th Lock the covers firmly by pressing the
locking hook. Hose and cable lengths
Left-hand connection
Remove the support struts
1. Unscrew and remove all screws on the
vertical transport struts. (~ 140 cm
0 ~ 145 cm
8 ~ 95 cm
@ 60cm ~ 100cm
or
Right-hand connection
2. Remove the transport struts.
(~ 95 cm
0 ~ 195 cm
8 ~ 140 cm
@ 60cm ~ 100cm
Note: If the inlet hose is too short for the
connection, an extension can be ordered
from customer service.
16

Positioning and connecting de
Water inlet connection
: warning
Risk of death!
1. Connect the water inlet hose to the
tap (¾ "=
26.4 mm) and on the device:
- Model: default
Contact with live parts creates the risk of
electric shock. Do not immerse the
Aquastop safety valve in water (contains an
electrical valve).
* depending on the model
Please note the following when
connecting the device:
Hints
■Only operate the device with cold tap
water.
Do not connect the device to the mixer
tap of a pressureless hot water heater.
Do not use a used inlet hose. Use only
the supply hose supplied or one
purchased from an authorized
specialist retailer.
Do not kink, squeeze, modify or cut the
water inlet hose (otherwise the
strength is no longer guaranteed).
Only tighten the screw connections by
hand. If the screw connections are
tightened too tightly with a tool (pliers),
the threads can be damaged.
- Model: AquaSecure
■
■
■
- Model: Aqua stop
■
Optimal water pressure in the mains
at least 100 kPa (1 bar)
maximum 1000 kPa (10 bar) Tip: In addition, connect an external
water filter (depending on the
model) between the water inlet hose
and the tap. The filter removes dirt
particles from the water.
The water filter must be cleaned
regularly if it is contaminated. This
prevents blockages. See also ~ separate
installation and cleaning instructions
for the water filter.
When the tap is open, at least 8 l / min flow.
If the water pressure is higher, connect
a pressure reducing valve.
17th

de Positioning and connecting
2. Carefully open the tap and check the
connection points for leaks. The screw
connection is under water line
pressure.
connection
■Drain in a siphon
The connection point must be secured
with a hose clip, ∅ 24 - 40 mm
(specialist retailer).
Drainage
: warning
Risk of scalding!
When washing at high temperatures, you
may get scalded if you come into contact
with hot detergent solution, eg when
pumping hot detergent solution into a
wash basin.
Do not reach into the hot water.
Caution!
Water damage
■Drain into a sink
Secure the drain hose against
slipping out.
Elbow available from customer service:
Item number 00655300
If the drainage hose slips out of the wash
basin or the connection point due to high
water pressure when pumping out,
leaking water can cause water damage.
Secure the drain hose against slipping out.
Caution!
Device damage / damage to textiles
If the end of the drain hose is immersed in
the water that has been pumped out, water
can be sucked back into the device and
damage the device / textiles.
Make sure that:
the stopper does not block the sink
drain. the end of the drain hose is not
immersed in the water being pumped
out. the water drains off quickly enough.
■Drain into a plastic pipe with a
rubber sleeve or a gully
■
■
■
Note: Do not kink the water drainage hose
or pull it lengthways.
Note: The plastic pipe is not included in
the scope of delivery and is available
from specialist dealers.
18th

Positioning and connecting de
Relay a message 3. Tighten the lock nut against the
housing.
Hold the foot firmly and do not adjust
the height.
The lock nuts of all four device feet
must be screwed tightly against the
housing!
Align the device using a spirit level.
Incorrect alignment can lead to loud
noise, vibrations and “wandering” of the
device.
1. Loosen the lock nuts with a wrench in a
clockwise direction.
Electrical connection
: warning
Risk of death!
2. Check the alignment of the device with a
spirit level, correct if necessary.
Change the height by turning the
device base.
All four feet of the device must be
firmly on the floor.
Contact with live parts creates the risk
of electric shock.
■Never touch the power plug with wet
hands.
■Always pull the power cable by the
plug and never by the cable, as it could
be damaged.
Observe the following notes and make
sure that:
Hints
■The mains voltage and voltage
specification on the device (device
label) match.
The connection value and the
required fuse are specified on the
device label.
The device is only connected to
alternating current via a properly
installed protective contact socket.
The mains plug and socket match.
the earthing system has been installed according to
regulations.
■
■
■
19th

de Positioning and connecting
■Power cable change (if necessary) can only be
carried out by a qualified electrician.
Replacement power cable available from
customer service.
Multiple plugs / couplings and
extension cables are not used.
When using a residual current circuit
breaker, only one type with this
symbol is used: z.
Only this symbol guarantees
compliance with the current
regulations.
the power plug is accessible at all
times.
the power cord is not kinked,
squashed, modified, cut or come into
contact with heat sources.
Note: To avoid foaming, only use
half the recommended amount of
detergent. Do not use wool or mild
detergents.
8th. Close the detergent drawer.
■
■9. Start reloading choose.
10. When the program has ended, open
the program selector Û ( The end)
to adjust.
The device is now ready for use.
■transport
■z. B. when moving
Preparatory work:
1. Turn off the tap.
2. Reduce the water pressure in the inlet
hose. ~ Page 45
3. Pump off the remaining water. ~ Page 43
4th Disconnect the device from the mains.
5. Remove the hoses.
6th Empty the dosing container.
Before washing for the first time
The device was thoroughly tested before it
left the factory. In order to remove any test
water residues, the
Caution!
program Cotton 90 ° C without Danger of damage to the appliance
from detergent or fabric softener
leaking out of the dispenser
Do laundry.
Note:
■The device must be properly
installed and connected. Leaking detergent or fabric softener
can impair the function of the
appliance and
z. B. cause electronic damage. Empty
the dosing container before
transporting the device.
~ " Positioning and connecting "on
page 13
■Damaged devices must not be put
into operation.
1.
2.
3.
Install transport locks:
Plug in the power plug. Open
the tap.
Close the washing machine door; do not put any
laundry in the machine.
1. Remove and keep covers.
Note: Use a screwdriver if necessary.
4thThe program Cotton 90 ° C
choose.
Open the detergent drawer. Pour
approx. 1 liter of water into the dosing
tank II.
Pour universal detergent into dispenser
II for light soiling in accordance with
the manufacturer's instructions.
5.
6th
7th
20th