Sierra Comfort SC-3000 User manual

Electric Lift Massage Table User Manual
For Use with Model Numbers:
Standard Electric Lift Massage Table –Flat, SC-3000
Standard 2-Section Electric Lift Massage Table –Adjustable Back, SC-3001
Standard 4-Section Electric Lift Massage Table –Adjustable 4 Section, SC-3002

© COPYRIGHT 2021 SIERRA COMFORT ®
© Copyright 2021 Sierra Comfort, all rights reserved.
This document or any portion thereof may not be
reproduced in any way, including photocopying or
translation to another language without the prior
written permission of Sierra Comfort®. Sierra Comfort®
is a registered trademark of Boston Atlantic Capital
Group, LLC.
_____________________________________________
DISCLAIMER
Sierra Comfort does not reserve the right to control the
use of its products, and is not liable for improper or
unintended use of its products. Please refer to the
Intended Use Statement within the manual or on our
website at www.sierracomfort.com.
Sierra Comfort will not be held liable under any
circumstance for indirect, incidental, or consequential
damages including loss of profit, production, or
malfunctioning of the product as a result of misuse;
including physical injury or death. The buyer takes full
responsibility and risk for the product upon submitting
payment and should act in accordance with the
intended use of the product and all safety procedures
and warnings detailed within the manual and labeled on
the physical item.
This disclaimer is exclusive and replaces all others, oral
or written, expressed or implied, and cannot be
modified by any Sierra Comfort employee, distributor,
advertiser, or other third party organization. Some
states do not allow the exclusion or limitation of
liabilities for incidental or consequential damages, and
in such cases the above limitation or exclusion may not
apply.
INTENDED USE STATMENT
Sierra Comfort massage tables are designed and
manufactured to be used responsibly and for intended
uses only. Our tables are built specifically for
immobile/traditional massage practices and to be used
within the guidelines of all warnings and instruction
manuals. At no time should the table be used in excess
of its working weight capacity (weight of subject on
table, plus the amount of pressure being applied to the
subject). When receiving treatment, clients should
remain still with weight and body position distributed
evenly along the tabletop. Never should more than one
person be allowed on the table at once. Do not front
load one end of the table. Misuse, excessive force or
movement, and/or direct pressure may cause structural
components to fail, potentially resulting in injury to the
client and/or operator.
Prior to use of your Sierra Comfort massage table, be
certain to read and understand all instructions and
warnings. Proper setup, use, and care of your table will
prevent accidents and injury, as well as maintain the
integrity of the product. Any questions regarding your
Sierra Comfort product should be emailed directly to
our support team at [e-mail].
In summary; Sierra Comfort concludes its products are
safe when used as intended. In no event shall Sierra
Comfort be liable for any direct, indirect, punitive,
incidental, or consequential damages to property or life
arising out of or connected with the misuse of its
products.

WARRANTY
1. Sierra Comfort warrants that all new purchases, referred to hereinafter as the “product”, are free from manufacturing
flaws/defects in material and workmanship. Our products are safely designed and manufactured to support proper
usage, as outlined in our user manuals and Intended Use Statement.
2. Our limited warranty is valid for 2 years from the original purchase date. The warranty is applicable only to the
original buyer and to items purchased brand new directly from Sierra Comfort or from one of our named authorized
dealers. Our warranty will not cover any Sierra Comfort products purchased from unauthorized dealers or
miscellaneous sellers.
3. If upon receipt your item is found defective, flawed, defunct, used, or malfunctioning; please report the issue to us
immediately and stop all use of the product until the issue is fully resolved. Items purchased directly from Sierra Comfort
can be returned within 30 days of receipt. Full details regarding our Return Policy can be found on our website. Sierra
Comfort products purchased from authorized dealers/retailers will be subject to the return policy specific to that
retailer.
4. Our warranty covers any structural and functional components pertaining to the original design of our massage tables,
including table legs, footings, casters, support panels, cable frame supports, electrical components and hardware. The
warranty does not cover claims relating to foam cushioning, vinyl upholstery coverings, and any accessory parts that
may suffer from normal wear and tear.
5. Our warranty is applicable only to flaws/defects in workmanship, structural materials/parts, and/or components. The
warranty does not apply to normal wear and tear, altered or removed parts/components, defects resulting from
misuse/unintended use, lack of maintenance, accidents, spills, exposure to extreme conditions, or incidental and
consequential costs such as; storage, telephone, rental, shipping, transportation, inconvenience, loss of income, loss of
time, or other consequential damages. Any modifications made to the product will void the warranty completely.
6. The warranty does not cover any accessory parts that may be included with the massage table; including face
cradles, face pillows, carrying bags, sheets, and bolsters.
7. Our obligation under this warranty is limited to replacing parts/components as necessary to remove malfunction from
flaws/defects in structural materials and/or components. Any parts/components will be replaced and shipped free of
charge so as long as the warranty is valid. Sierra Comfort reserves the right to improve the design of any product
without any obligation to improve a product previously manufactured.
8. Warranty claims will require the submittal of the original order receipt, along with an explanation, plus photos/videos
detailing any parts/components claimed to be flawed/defective/malfunctioning.
9. Sierra Comfort provides detailed and comprehensive instruction manuals, warnings, intended use statements,
maintenance/care instructions, and disclaimers for the benefit and safety of our buyers in order to ensure safe and
responsible practices. We are not responsible if our products are used in a way that is not intended and/or not in
accordance with provided instructions, warnings, intended uses, and safe practices. The buyer is responsible for
reviewing all provided materials in order to ensure proper usage and safety.

SAFETY & WARNING SYMBOLS
Safety and warning symbols inserted throughout the user manual are for the purpose of preventing injury or damage
to the user, client, or product. Any instructions including warnings/caution symbols require immediate attention.
1. Prior to use, thoroughly inspect all areas of the massage table and included accessories for any manufacturing
flaws/defects; including, but not limited to, the table frame, hardware, power cord, and the alignment/security of all
components.
2. Your table should be installed in a dedicated treatment area meant for private use only. Allow for at least 3 feet of
clearance around the entire table.
3. Prior to use, position your table in an area having a level and firm surface so that all four feet/casters remain secure
to the ground. Be sure to lock the wheel casters in place once you have configured your space. The tabletop should be
completely level when in position for use.
4. Avoid positioning the power cord in a highly trafficked area where it may become a tripping hazard.
5. Keep your (and your client’s) hands, feet, and all other body parts away from any moving/adjustable parts, especially
the motor and frame.
6. Keep unsupervised children/pets away from the treatment area at all times. Never allow for anyone (including
yourself) to crawl underneath the table and potentially risk being entangled inside the frame. Do not store accessories
or needed items underneath or inside of the massage table.
7. If components on the underside of the tabletop or along the frame are needing adjustment or repair, but sure to
unplug the power cord and turn the table on its side, or onto its tabletop.
8. When moving onto or off of the tabletop, be sure to do so with ease and towards the center of the tabletop where
most stable.
9. When adjusting the backrest or leg rest, be sure that the client is removed from the table, or sitting in a position that
does not add weight to the area being adjusted.
10. Do not overload one side of the table. Uneven and/or excess weight on one side may cause the table to lift/tilt.
11. Never should there be more than one person on the massage table at once. Avoid any sudden and direct pressure
on the tabletop. Never stand, jump, or move erratically on the massage table.
12. When receiving treatment, clients should remain still with weight and body position distributed evenly along the
tabletop.
13. Do not apply more than 500 lbs. (227 kg) of total working weight to the tabletop. NOTE; the total working weight is
equal to the weight of the subject on the table plus the weight added through downward pressure.
14. Do not apply more than 25 lbs. (11 kg) of total working weight to the face cradle.
15. Do not use any attachments, accessories, or components that were not manufactured/supplied by Sierra Comfort.
16. Never use or store your table in wet or overly humid conditions. Water/excessive moisture may damage materials
and components.
RISK OF ELECTRIC SHOCK, BURNS, FIRE, OR INJURY:
1. Always unplug the power cord from the electrical outlet when the table is not in use and when cleaning or servicing.
2. Do not touch the power supply (control box) located underneath the tabletop when the power cord in plugged into
its outlet.
3. Keep the power cord clear of any heated surfaces. Be certain that the cord and its plug are well maintained.
4. Never use your massage table outdoors where it may be exposed to dangerous and wet conditions.
5. The three prong plug should be secured to a grounded outlet. If the plug does not fit into its outlet, contact a qualified
electrician to install the proper outlet. Do not modify the plug in any way or use alternative adapters.
6. Power Supply = 110V (AC Grounded)