Sighta CLOVER 10 User manual

CLOVER 10
Handheld Video Magnifier
User Guide
Rev G

Contents
Precaution 1
Quick Start 3
Overview 3
Compositions 5
Accessories 8
Battery Charging 9
Stand 11
Operation 13
Power Button 13
Beep Type 14
Beep Control 14

Camera Switch 14
Magnification 15
Color Mode 16
Brightness 19
Lighting 20
Image Freeze 20
Image Storage 21
Image Playback 22
Line & Mask 24
Find 25
Real-time Navigation 26
Memory 27

HDMI Output 27
Auto Power Saving 29
Restore 29
Hardware Reset 30
Troubleshooting 31
The unit does not turn on 31
Black screen or White screen 31
The image does not change 32
Smudges or blemishes on the screen 32
Specifications 33

1
Precaution
Before using Clover 10 for the first time, you must charge
its battery. Refer to Battery Charging section for more
details.
Always operate the unit in a place where the temperature
is between 10°and 35°C (50°and 95°F).
Keep the unit away from wet areas, rain, and other
sources of liquids. Do not submerge the unit.

2
Do not attempt to repair the unit. Any unauthorized
attempt will void the product warranty. Please contact
your distributor.
Use the supplied power adapter and battery.

3
Quick Start
Overview
Thank you for purchasing Clover 10.
Clover 10 is a portable 10 inch video magnifier with excellent
Full HD image quality, which assures the real-time crisp image
while moving or changing magnification continuously from 2.5X
to 18X. The integrated dual camera system provides three
viewing ways to fulfill the daily use. For example, Near View to
read books or newspapers; Far View to see posters or
blackboards; Mirror View to dress up.

4
Besides the common zooming and color mode function, there
are also various practical functions such as Reading Line &
Mask, Image Freeze and Storage, Find and Navigation.

5
Compositions
1
34 5 6 7
2
1. LCD Screen
2. Front Camera
3. Enhanced Color
4. Zoom Out
5. Joystick
6. Zoom In
7. True Color

6
8
9
10
8. Rear Camera
9. LED Lights
10. Stand

7
11
12
13
14 15
16 17
11. Power Button
12. Power Port
13. HDMI Port
14. Locate Button
15. Freeze Button
16. Camera Switch
17. USB Port

8
Accessories
PUSH
U
U
U
U
U
U
U
U
U
U
User Manual
Power Adapter
HDMI Cable
Cleaning Cloth
Carrying Case

9
Battery Charging
1. Connect the supplied power cable to the power adapter.
2. Connect the supplied power cable to the unit’s power port.
3. Plug the power adapter into an AC outlet and start charging.

10
Power LED
Charging when the unit is off, the power LED will be green,
and then auto turn off when fully charged. A full Charge will
take about 5 hours, and will support the unit working for about
3 hours.
Charging when the unit is on, the power LED will be green.
When the unit is on without charging, the power LED will be
green when the battery level is high and will be red when the
battery is dying. As long as the red light starts to flash, it is a
signal to charge the battery.

11
You can also check the battery status by pressing the power
button. Refer to the following instructions for more details.
Stand
With integrated fold-away writing stand at an ergonomic viewing
angle, clover 10 can satisfy users’ desire to read more and for a
long time in a comfortable position. Also there’s enough space
under the camera to work the pen. Unfold the stand as the
following figure shows.
The rear camera is designed to auto rotate according to the
status of the stand, so that both the Near View and Far View are
supported on this unit.

12

13
Operation
Power Button
Press and hold the power button for 5 seconds to turn
on/off the unit.
When the unit is on, press the power button to check the
current status of battery capacity, freeze mode, focus status,
and beep.
Press other buttons when holding the power button will make
combo functions. Refer to the following instructions for more
details.

14
Beep Type
Unit on/off beep
Button beep
Threshold beep
Low battery beep
Beep Control
Press and hold the Power button and press the True Color
button to turn on/off the beep.
Camera Switch
Turn the Camera Switch left to open the rear
camera for Near View and Far View.

15
Turn the Camera Switch right to open the front
camera for Mirror View.
Magnification
Press the Zoom In button to increase magnification, and
hold the Zoom In button for continuous increase.
Press the Zoom Out button to decrease magnification, and
hold the Zoom Out button for continuous decrease.
Magnification range when standing on table:
Back/Front Camera: 2.5x –18x

16
Color Mode
A color mode is a predefined color combination. Full-color
mode is suitable for viewing pictures or maps.
Enhanced Color mode is combined with different foreground
and background colors which can help to read more clearly.
Press the Enhanced Color button to go through the
Enhanced-color combination list.
Press the True Color button to return to the Full-color
mode.