SIGNIFY EA2306 User manual

Model Number: EA2306
INSTRUCTION MANUAL
MOTORCYCLE BLUETOOTH®KIT

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
02
Welcome
Congratulations on choosing to buy a Signify®product.
All products brought to you by Signify®are manufactured to the highest
standards of performance and safety, and, as part of our philosophy of
customer service and satisfaction, are backed by our comprehensive 1 Year
Warranty and customer technical support line.
This comprehensive instruction manual will provide you with a detailed
guide on how to operate your product and will also assist you in
troubleshooting any problems that you may encounter.
If you have any queries regarding the use of this product, please feel free
to phone our technical support line for some friendly advice. If you are
experiencing difculties or believe that the product may have a technical
fault, we will assist you in rectifying the issue. We can generally solve most
problems simply and quickly over the phone, so please always phone us
rst!
We are sure that you will enjoy using this product and you can expect to
gain years of service from this product when it is used and maintained in
the correct manner.

03
AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
Contents
Welcome 02
Warranty Details 04
General Information and Safety Instructions 05
Product Overview 08
Headset Main Unit 09
Getting Started 10
Installation 11
Fitting the Headset to your Helmet 11
Instructions 14
Charging the Headset 14
Turning the Headset On/Off 14
Bluetooth®Connection 14
Pairing your Bluetooth®Enabled Device 15
Disconnecting the Bluetooth®Enabled Device 15
Digital Assistant Ready 16
Managing Phone Calls 17
Intercom Pairing 18
Ending Two-Way Intercom 19
Intercom Controls 20
Pairing Additional Headsets 20
Switching the Headset Language 23
Resetting the Headset 23
Audio Streaming 24
Audio Streaming Playback Controls 24
FM Radio 25
Frequently Asked Questions 26
Other Useful Information 27
Cleaning and Maintenance 27
Storage 27
Trademarks 27
Responsible Disposal 28
Specication Table 29
Repair and Refurbished Goods or Parts Notice 31

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
04
The product is guaranteed to be free from defects in workmanship and parts for a period of
12 months from the date of purchase. Defects that occur within this warranty period, under
normal use and care, will be repaired, replaced or refunded at our discreon. The benets
conferred by this warranty are in addion to all rights and remedies in respect of the
product that the consumer has under the Compeon and Consumer Act 2010 and similar
state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entled to a replacement or refund for a major failure and for compensaon
for any other reasonably foreseeable loss or damage. You are also entled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registraon/
TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
Motorcycle Bluetooth® Kit
Warranty Details

05
AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
RETAIN FOR FUTURE USE
Read this manual thoroughly before rst use, even if you are familiar with
this type of product. The safety precautions enclosed herein reduce the
risk of re, electric shock and injury when correctly adhered to. Please
keep this instruction manual in a safe place along with your purchase
receipt, warranty certicate and carton for future reference. If applicable,
pass these instructions and packaging on to the next owner of the
product. Always follow basic safety precautions and accident prevention
measures when using an electrical product.
1. Read all instructions before using the Motorcycle Bluetooth®Kit.
2. This Motorcycle Bluetooth®Kit is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the Motorcycle
Bluetooth®Kit by a person responsible for their safety. Children should
be supervised to ensure they do not play with the headset.
3. Do not use the Motorcycle Bluetooth®Kit for anything other than its
intended use.
4. Do not allow the headset, microphones, earphone mounts or USB-C
charging cable to be submerged in water or any other liquid.
5. The use of attachments not recommended or sold by the
manufacturer is dangerous and may cause re, electric shock or
injury.
6. Keep the headset and microphone, earphone mounts out of direct
sunlight.
7. Do not pull or carry by the USB-C charging cable, use the cable as
a handle, close a door on the cable, or pull the cable around sharp
edges or corners. Keep the USB-C charging cable away from heated
surfaces.
8. Do not bend or damage the USB-C charging cable.
General Information and Safety Instructions

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
06
General Information and Safety Instructions (cont.)
9. Always turn off the headset when not in use. To disconnect from
the power supply, rst ensure the unit is turned off by pressing and
holding the power/intercom button for approximately 3 seconds,
switch off at the outlet, then grip the plug and pull from the power
socket. Never pull by the cable. The USB-C charging cable must
be removed from the power socket before cleaning, servicing, or
maintenance.
10. Never force the USB-C charging cable into an outlet.
11. The manufacturer and retailer are not responsible for any eventual
damages caused by improper or faulty use.
12. The headset and microphone have no user serviceable parts
contained within. Do not attempt to repair, disassemble or modify the
headset or the microphone.
13. The internal battery is not replaceable, do not attempt to replace it.
14. This product is intended for personal use only, and is not intended for
commercial, industrial or trade use.
CAUTION! Always use extreme care when using the headset while
operating a motorcycle, motor vehicle or bicycle.
CAUTION! Disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, can result in an explosion.
CAUTION! Leaving a battery in an extremely high temperature
surrounding environment can result in an explosion or the leakage of
ammable liquid or gas.
CAUTION! A battery subjected to extremely low air pressure may result
in an explosion or the leakage of ammable liquid or gas.

07
AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
WARNING: A battery can only be subjected to 0˚C to 45˚C during usage,
storage or transportation.
WARNING: A battery can only be subjected to 11.6kPa or less during
usage, storage or transportation at an ambient temperature of 20±5˚C.
General Information and Safety Instructions (cont.)
Read this instruction manual
carefully before using the Motorcycle
Bluetooth®Kit and keep it in a safe
place for future reference.

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
08
Product Overview
Included (not pictured): 1 x Instruction Manual, 1 x Getting Started Guide,
1 x Warranty Certicate.
1. Headset
2. Wired Boom Microphone
3. Wired Microphone
4. Dual Hook & Loop Pad
Earphone Mounts
5. 2 x Headset Clips
6. 3M™ pad for Headset Clip
7. USB-C Charging Cable
8. 4 x Felted Adhesive Pads (for
speakers)
9. 2 x Small Felted Adhesive
Pads for Microphone
1
5
2
6
7
9
384

09
AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
1. Jog Dial
2. Power/Intercom Button
3. LED Indicator
4. Multifunction Button
5. USB Charging Port
6. Earphone Input
Headset Main Unit
Product Overview (cont.)
1
3
2
4
5
6

AFTER SALES SUPPORT
1300 777 137
[email protected]
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
10
Getting Started
Before First Use
Prior to using your Motorcycle Bluetooth®Kit, please read all safety and
operating instructions thoroughly. Please ensure you follow the steps
below before using this product. We recommend you keep the original
packaging for storing your Motorcycle Bluetooth®Kit when not in use.
1. Unpack the product but keep all packaging material until you have
made sure your new Motorcycle Bluetooth®Kit is undamaged and in
good working order.
2. Remove the twist-ties which are securing the different components of
the Motorcycle Bluetooth®Kit. Uncoil the USB-C charging cable and
straighten it to remove any kinks. Do not use the product if the cable
is damaged, please call the After Sales Support line on 1300 777 137
for further advice.