SIIG JU-000061-S1 User manual

1
USB to Serial-Value
Quick Installation Guide
04-0472C
Introduction
The USB to Serial-Value adds one 9-pin RS232
serial port to USB-equipped computer systems.
Key Features and Benefits
• Compliant with USB specification,
revision 1.1
• RoHS compliant
Serial Number Sticker
For future product return or exchange, this serial
number is required. Please keep it for your
reference.

2
System Requirements
• USB equipped computer with an available
USB port
• Windows®
8 (32-/64-bit) / 7 (32-/64-bit) /
Vista (32-/64-bit) / XP (32-/64-bit) / Server
2003 & 2008 (32-/64-bit) / Server 2008 R2
/ 2000
Package Contents
•USB to Serial-Value
• Driver CD
• Quick installation guide
Layout
Figure 1
USB Type A RS-232

3
Driver Installation
Make sure the driver is installed Before plugging
the USB to Serial-Value into the computer.
Windows 8 (32-/64-bit) / 7 (32-/64-bit) /
Server 2008 R2
1. Insert the driver CD.
2. At the AutoPlay box: Click Open folder to
view files, then double click Setup.
If AutoPlay doesn't start: Click Windows
key and R, type D:\setup.exe,then click
OK. (Change D: to match your CD-ROM
drive letter)
3. At the User Account Control, click Yes.
Skip this step if not prompted.
4. Click Next, then click Finish.
5. Plug the USB to Serial-Value into a USB port
and the driver will install automatically.
6. Restart Windows to complete the
installation.

4
Windows Vista (32-/64-bit)
1. Insert the driver CD.
2. At the CD autoplay window: Double click
Setup.
If the CD doesn't auto-start: Click Start, in
the Start Search box, type D:\setup.exe,
then press Enter.(Change D: to match your
CD-ROM drive letter)
3. At the User Account Control, click Allow.
4. Click Next, then click Finish.
5. Plug the USB to Serial-Value into a USB port
and the driver will install automatically.
6. Restart Windows to complete the
installation.
Windows Server 2008 (32-/64-bit)
1. Insert the driver CD.
2. At the AutoPlay box: Click Open folder to
view files, then double click Setup.
If AutoPlay doesn't start: Click Start, in the
Start Search box, type D:\setup.exe,then
press Enter. (Change D: to match your CD-
ROM drive letter)

5
3. Click Next, then Finish.
4. Plug the USB to Serial-Value into a USB port
and the driver will install automatically.
5. Restart Windows to complete the
installation.
Windows XP (32-/64-bit) / Server 2003 (32-
/64-bit) / 2000
1. Insert the driver CD.
2. Click Start, Run, type D:\setup.exe, then
click OK. (Change D: to match your CD-
ROM drive letter).
3. Click Next, then Finish.
4. Plug the USB to Serial-Value into a USB port
and the driver will install automatically.
5. Restart Windows to complete the
installation.

6
To Verify Windows Installation
1. Check Device Manager to verify
installation.
For Windows 8 / 7 / Server 2008 R2: Right
click Computer, click Manage.
For Windows Vista: Right click Computer,
click Manage, click Continue.
For Server 2008: Right click Computer, click
Manage, double click Diagnostics.
For XP / Server 2003 / 2000: Right click My
Computer, click Manage.
2. Click Device Manager.
3. Double click Ports (COM & LPT), a Prolific
USB-to-Serial Comm Port... should be
displayed.

7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for five (5) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.

About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIGproducts offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajordistributors, system integrators, and VARs in the Americas and
the UK, and through e-commerce sites.
USB to Serial-Value is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarksof SIIG, Inc. All other namesused in this publication are for identification only and
may be trademarks of their respective owners.
January, 2013 Copyright © 2013 by SIIG, Inc. All rights reserved.
PRODUCTNAME
USB to Serial-Value
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG,Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: [phone]