SIIG AV-GM04Q3-S1 User manual

HDMI over IP Multicast System with PoE support
TX
RX

P/N: AV-GM04Q3-S1
Safety and Notice
The AV-GM04Q3-S1 HDMI over IP Multicast System with PoE support has been tested for
conformance to safety regulations and requirements, and has been certified for international use.
However, like all electronic equipments, the AV-GM04Q3-S1 should be used with care. Please read
and follow the safety instructions to protect yourself from possible injury and to minimize the risk of
damage to the unit.
●Follow all instructions and warnings marked on this unit.
●Do not attempt to service this unit yourself, except where explained in this manual.
●Provide proper ventilation and air circulation and do not use near water.
●Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
●Use only the power adapter and power cords and connection cables designed for this unit.
●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
TABLE OF CONTENTS
INTRODUCTION................................................................................................................ 1
FEATURES........................................................................................................................ 1
PACKAGE CONTENTS...................................................................................................... 2
SPECIFICATIONS.............................................................................................................. 2
PANEL DESCRIPTIONS.................................................................................................... 3
Transmitting unit......................................................................................................... 3
Receiving unit............................................................................................................. 4
CONNECTION DIAGRAM.................................................................................................. 6
IR PASS-THROUGH............................................................................................................
HARDWARE INSTALLATION ............................................................................................ 7
EDID LEARNING..................................................................................................................
PIN DEFINITION............................................................... Error! Bookmark not defined.9
NOTICE............................................................................Error! Bookmark not defined.10
WARRANTY....................................................................................................................... 8

1
INTRODUCTION
The AV-GM04Q3-S1 HDMI over IP Multicast System with PoE support boosts up your video/audio
transmission distance up to 100m(330ft) in HDTV 1080p format. With cost effective Ethernet cable, users
can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other HDMI
sources broadcasting to distant display monitors including HDMI or DVI enabled TV sets or LCD PC
monitors. Besides AV-GM04Q3-S1 is HDCP compliant, and supports PoE, IR and RS-232 pass-through
path.
With broadcasting management software and Gigabit Ethernet network switch (supported IGMP),
AV-GM04Q3-S1 is a complete HD video broadcasting solution for digital signage. It can transmit Full HD
1080p HDMI video broadcasting over IP network. The broadcasting format can be Point to Point, Point
to Many, and Multi-Casting. Multi-casting is based on Managed Gigabit Switch with 802.1Q VLAN
function which provides control remotely, so multi video and source allowed and supported.
FEATURES
●Supports resolution up to 1080p60
●HDMI v1.3 compliant
●HDCP 1.4 compliant
●Supports audio extraction via stereo & toslink on both transmitter and receiver
●Supports POE function
●Sample rates of 32~192KHz and sample sizes of 16~24 bits
●Transmits video and audio signal over a network
●Supports HDMI loop through
●Easy distribute multi scalable Full HD video to different locations based on IP network
●Supports full frequency IR signal pass-through from 20KHz to 60KHz
●Full Duplex RS-232 control up to 115,200 bps through connector
●Up to 1,063 Groups Multi-Casting
●Encoder: MPEG4 AVC part10 & MPEG audio layer (1/2/3) & Planar: 4:2:0 (YUV)
●Supports Protocol: IP, TCP, UDP, RTP, IPv4, DHCP, HTTP, IGMP, ICMP, MULTICAST, UNICAST
●Ethernet: 10/100 BASE-T RJ45
●Supports Streaming Bit rate up to 15Mbps (+-10%)
●Enable Protocol compatible with any software player (such as VLC® or others)
●Latency: 720P60: 190~240ms / 1080P60: 380~430ms.
●Wall mounting housing design for easy and robust installation

2
PACKAGE CONTENTS
AV-GM04Q3-S1-TX
●1x AV-GM04Q3-S1-TX
●1x IR blaster cable
●1x User Manual
SPECIFICATIONS
Model Name
AV-GM04Q3-S1
Technical
AV-GM04Q3-S1[Tx]
AV-GM04Q3-S1[Rx]
Role of usage
Transmitter [TX]
Receiver [RX]
HDMI compliance
HDMI
HDCP compliance
Yes
Video bandwidth
Single-link 225MHz [6.75Gbps]
Video support
Up to 1080p60
HDMI over UTP
transmission [24-bit]
Full HD (1080p)-100m(330ft) [CAT.X]
Audio support
stereo digital audio
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
[1] Human body model —±19kV [air-gap discharge] & ±12kV [contact
discharge]
[2] Core chipset —±8kV
PCB stack-up
4-layer board [impedance control —differential 100Ω; single 50Ω]
IR pass-thru
Yes
RS-232 support
Yes
Input
1x HDMI
1x RJ45 + 1x 3.5mm
Output
1x RJ45 +1x HDMI + 2x 3.5mm + 1x
TOSLink
1x HDMI + 1x 3.5mm + 1x TOSLink
HDMI source control
Controllable via IR pass-through from RX to TX with IR extenders
IR remote control
Electro-optical characteristics: = 25° / Carrier frequency: 20-60kHz
HDMI connector
Type A [19-pin female]
RJ45 connector
WE/SS 8P8C with 2 LED indicators
3.5mm connector
IR blaster, IR receiver, & Stereo out
Mechanical
Housing
Metal enclosure
Dimensions
Model
AV-GM04Q3-S1-RX
● 1x AV-GM04Q3-S1-RX
● 1x IR receiver cable
●1x User Manual

3
[L x W x H]
Package
Carton
Weight
Model
Package
Fixedness
Wall-mounting case with screws
Power supply
PoE (Power over ethernet)
Power consumption
5 Watts
Operation
temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
PANEL DESCRIPTIONS
Transmitting unit ►AV-GM04Q3-S1-TX
Front Panel
1. +5V DC: Connect to 5V DC power supply (optional)
2. RS-232: Connect to PC serial port with a DSUB-9 male-male cable here
3. Mini USB: for F/W update
4. S/PDIF Output (TOSLINK)
5. Stereo Output (3.5mm)
6. HDMI IN: Connects to a HDMI source with a HDMI male-male cable
Rear Panel
7. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster

4
8. LED Indicator: Power and signal LED indicator
9. HDMI LOOPOUT: Connect to a HDMI display with a HDMI male-male cable.
10. Dip Switch: Video channel setting (Please refer to “Notes”)
11. HDMI Signal OUT: RJ-45 Network connector
Receiving unit ►AV-GM04Q3-S1-RX
Front Panel
12. LED Indicator: Power and signal LED indicator
13. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
14. HDMI OUT: Connect to a HDMI display with a HDMI male-male cable.
15. S/PDIF Output (TOSLINK)
16. Stereo Output (3.5mm)
Rear Panel
17. +5V DC: Connect to 5V DC power supply (optional)
18. RS-232: Connect to PC serial port with a DSUB-9 male-male cable here
19. Mini USB: for F/W update
20. HDMI Signal IN: RJ-45 Network connector
Notes: TX group ID dip-switch setting
1. For ID=1~63, please refer the table below to set up (Hardware control)
2. For ID=64~1063, please adjust the DIP switch to ID=0, and the real ID can be decided by
the external software (Software control)

5
ID
Pin1
Pin2
Pin3
Pin4
Pin5
Pin6
ID
Pin1
Pin2
Pin3
Pin4
Pin5
Pin6
0
↓
↓
↓
↓
↓
↓
32
↓
↓
↓
↓
↓
↑
1
↑
↓
↓
↓
↓
↓
33
↑
↓
↓
↓
↓
↑
2
↓
↑
↓
↓
↓
↓
34
↓
↑
↓
↓
↓
↑
3
↑
↑
↓
↓
↓
↓
35
↑
↑
↓
↓
↓
↑
4
↓
↓
↑
↓
↓
↓
36
↓
↓
↑
↓
↓
↑
5
↑
↓
↑
↓
↓
↓
37
↑
↓
↑
↓
↓
↑
6
↓
↑
↑
↓
↓
↓
38
↓
↑
↑
↓
↓
↑
7
↑
↑
↑
↓
↓
↓
39
↑
↑
↑
↓
↓
↑
8
↓
↓
↓
↑
↓
↓
40
↓
↓
↓
↑
↓
↑
9
↑
↓
↓
↑
↓
↓
41
↑
↓
↓
↑
↓
↑
10
↓
↑
↓
↑
↓
↓
42
↓
↑
↓
↑
↓
↑
11
↑
↑
↓
↑
↓
↓
43
↑
↑
↓
↑
↓
↑
12
↓
↓
↑
↑
↓
↓
44
↓
↓
↑
↑
↓
↑
13
↑
↓
↑
↑
↓
↓
45
↑
↓
↑
↑
↓
↑
14
↓
↑
↑
↑
↓
↓
46
↓
↑
↑
↑
↓
↑
15
↑
↑
↑
↑
↓
↓
47
↑
↑
↑
↑
↓
↑
16
↓
↓
↓
↓
↑
↓
48
↓
↓
↓
↓
↑
↑
17
↑
↓
↓
↓
↑
↓
49
↑
↓
↓
↓
↑
↑
18
↓
↑
↓
↓
↑
↓
50
↓
↑
↓
↓
↑
↑
19
↑
↑
↓
↓
↑
↓
51
↑
↑
↓
↓
↑
↑
20
↓
↓
↑
↓
↑
↓
52
↓
↓
↑
↓
↑
↑
21
↑
↓
↑
↓
↑
↓
53
↑
↓
↑
↓
↑
↑
22
↓
↑
↑
↓
↑
↓
54
↓
↑
↑
↓
↑
↑
23
↑
↑
↑
↓
↑
↓
55
↑
↑
↑
↓
↑
↑
24
↓
↓
↓
↑
↑
↓
56
↓
↓
↓
↑
↑
↑
25
↑
↓
↓
↑
↑
↓
57
↑
↓
↓
↑
↑
↑
26
↓
↑
↓
↑
↑
↓
58
↓
↑
↓
↑
↑
↑
27
↑
↑
↓
↑
↑
↓
59
↑
↑
↓
↑
↑
↑
28
↓
↓
↑
↑
↑
↓
60
↓
↓
↑
↑
↑
↑
29
↑
↓
↑
↑
↑
↓
61
↑
↓
↑
↑
↑
↑
30
↓
↑
↑
↑
↑
↓
62
↓
↑
↑
↑
↑
↑
31
↑
↑
↑
↑
↑
↓
63
↑
↑
↑
↑
↑
↑

6
CONNECTION DIAGRAM

7
IR PASS-THROUGH
IR Extenders
IR Blaster
IR Receiver
IR Sockets
IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver
from the other enf to control the devices corresponding to the IR signals.
IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of
the corresponding devices.
Definition of IR Earphone Jack
IR Blaster
IR Receiver
You can buy any IR extension cables in the market that are compatible to the definition of
the IR sockets for the extender if necessary for replacement use. However, IR cables longer
than 2m (6-ft) may not work.
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR
extenders. Please check carefully before plugging in the IR extender to the
respective IR sockets. Warranty will not cover the damage.
CAUTION!

8
WARRANTY
The SELLER warrants the AV-GM04Q3-S1 HDMI over IP Multicast system with PoE support free
from defects in the material and workmanship for 3 years from the date of purchase from the
SELLER or an authorized dealer. Should this product fail to be in good working order within 3 years
warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not
been subjected to accident, disaster, abuse or any unauthorized modifications including static
discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct
transaction only. This warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of
parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day
of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or
assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted
without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without
limitations, any other implied warranty or fitness or merchantability for any particular purpose, all
of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are
responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to
a 30 day warranty and must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However,
The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual.
The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages
resulting from any defect or omission in this manual, even if advised of the possibility of such
damages. Also, the technical information contained herein regarding the AV-GM04Q3-S1 features
and specifications is subject to change without further notice.
April, 2018
Support
For more info or tech support
http://www.siig.com/support