SIIG CE-H24911-S1 User manual

Features
• HDMI 2.0 & HDCP 2.2 compliant
• The highest resolution is 4K@60Hz
• Support one to one or one to many
• The transmission distance is up to 120m
• IR passback supports 20-60KHz wide
frequency
• Compatible with IEEE-568B Cat5e/6 cables
• Support 2.0 stereo audio
Package contents
1. HDMI Transmitter
2. HDMI Receiver
3. IR blaster (IR out) cable
4. IR receiver (IR IN) cable
5. Power adapter 5V/3A x2
6. Quick start guide
Dear Valued Customer
(Just WANTED YOU TO KNOW)
WE REALLY
APPRECIATE
YOUR PURCHASE
~thank you~
Layout
TX transmitter
1 HDMI input Connect with HDMI source
2 IR blaster
Connect with IR blaster cable
Please put the IR blaster close to
source device to better transmit the
IR signal from receiver
3 Reset Restart the device
4 Power indicator LED turns on when power on
5 Power input Connect with power adapter 5V/3A
6 Data indicator Blink when data is transmitted
7Connection
indicator
LED turns on when the transmitter
connects to the receiver, otherwise
it remains o
8 RJ-45 port Connect with Cat5e/6 cable
RX receiver
HDMI IN IR OUT RESET HDMI OUT IR IN RESET
1 HDMI output Connect with HDMI display
2 IR receiver
Connect with IR receiver cable
Please make sure the remote control
is within the required range of IR
receiver
3 Reset Restart the device
4 Power indicator LED turns on when power on
5 Power input Connect with power adapter 5V/3A
6 Data indicator Blink when data is transmitted
7Connection
indicator
LED turns on when the transmitter
connects to the receiver, otherwise
it remains o
8 RJ-45 port Connect with Cat5e/6 cable

HDMI 2.0 4K 60Hz HDbitT
Over Cat6 Extender
with IR - 120m
Quick Start Guide
04-1164A P/N: CE-H24911-S1
Application
Support
For more info or tech support
http://www.siig.com/support
NOTE: Using one TX with multiple RX will increase Route/
Switch’s loading. In this case, we suggest you to use Gigabit
switch and a single network to avoid your private network
being aected.
One to one connection
One to many connection
BLANK PAGE
Aug, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.