SIIG CE-H22T11-S1 User manual

1
Full HD Multi-Channel Expandable
Wireless HDMI Gateway Extender
Installation Guide
P/N: CE-H22T11-S1/CE-H22U11-S1
04-1097A

2
Introduction
The Full HD Multi-Channel Expandable Wireless HDMI
Gateway Extender connects up to 3 HDMI sources and
transmits HDMI A/V signals wirelessly up to 165ft with
1080p resolution.
Features and Benefits
• 10 selectable wireless channels available to prevent
signalinterferenceandtoprovideoptimalreception
quality
• Integrated HDMI output on the transmitter allows
for local monitoring of the extended display
• Built-it switch button and the included palm size
remotecontrolallowsyoutoselecttheHDMIsource
easily
• Built-in LED indicators provide instant recognition
for the connecting status
• Included IR extension modules allow remote
controlling of the HDMI source device from the
display unit
• Aluminumconstructionprovidesoveralldurability
and reliability
• Wall mountable, extraordinary cube-style design
creates a sleek and stylish presence to further
accommodate with A/V equipment

3
PackageContents
•Full HD Multi-Channel Expandable Wireless HDMI
Gateway Extender
• IR blaster extension cable
• IR receiver extension cable
• Power adapters (x2)
• Remote control (with one battery)
• Installation Guide
Specifications
Note: The transmission distance will vary depending on building layout, electronic
interference, other environmental conditions, and may be much less than the
maximum.
Wireless Technology 5 GHz
Signal Type HDMI
HDMI Version HDMI 1.3 compatible
HDCP Version HDCP 1.2 compatible
Transmission Distance Up to 50m (165ft)
Supported Resolutions 1080p/1080i/720p/576p/576i/480p/480i
HDMI Cable Distance Up to 5m (Input & Output)
Audio Format R/L stereo audio (2-ch)
Power
Input:
AC 100-240V, 50/60Hz
Output:
DC 5V/2A
Color Black and deep grey
Dimensions (TX & RX) 4.25" (W) x 2.36" (H) x 3.94" (D)
Weight 0.57lbs (TX) / 0.48lbs(RX)
Operating Temperature 32 to 122 degrees F
Storage Temperature 14 to 140 degrees F
Operating Humidity 0% ~ 90% RH (non-condensing)

4
Product Layout
Figure 1: Transmitter (TX) - front side
Switch button
(Source)
IR window
Input channel indicator
•Switch button (Source): Press to switch between
HDMI sources (HDMI sources 1, 2 or 3)
•Inputchannelindicator:Indicatestheinputchannel
selected. There are 10 channels (0-9)
•Switch button (Channel): Presstoselect the channel
•Input indicator: On when the HDMI signal is linked
properly
•Connection indicator:
- On: The Transmitter is powered on
- Blinking: The wireless connection is established
•IR window: Receives infrared signals from the
included remote control
Switch button (Channel)
Input indicator
Connection indicator

5
IR Out
Antenna port
HDMI out
HDMI In
Power jack
Figure 2: Transmitter (TX) - rear side
•Antenna port: Attach the included Antenna here
•HDMI Output (optional): Connects to an HDMI
display for local monitoring of the extended HDMI
display
•IR out: Plug the IR Blaster extension cable here
•Reset button: Press when the unit doesn't work
properly
•Powerjack: Connectsto the included power adapter
•HDMI In: Connect to your HDMI sources with
HDMI cables (cables not included)
Reset button

6
Figure 3: Receiver (RX) - front side
•Switch button (Source): Press to switch between
HDMI sources (HDMI sources 1, 2 or 3)
•Inputchannel indicator: Indicates theinputchannel
selected. There are 10 channels (0-9)
•Switch button (Channel): Presstoselect the channel
•Connection indicator:
- On: The receiver is powered on
- Blinking: The wireless connection is established
•Data transmission indicator: On when the HDMI
signal is linked properly
•IR window: Receives infrared signals from the
remote control
Data transmission
indicator
Connection indicator
IR window
Input channel indicator
Switch button
(Source)
Switch button (Channel)

7
HDMI Out IR in
Antenna port
Power jack
Figure 4: Receiver (RX) - rear side
•Antenna port: Attach the included Antenna here
•Powerjack: Connectsto the included power adapter
•HDMI Out: Connects to your HDMI display with a
HDMI cable (cable not included)
•IR in: Plug the IR Receiver extension cable here
•Reset button: Press when the unit doesn't work
properly
Reset button

8
IR Remote Control
Figure 5: IR Remote Control
•Previous (CH-): Select the previous input source
•Next (CH+): Select the next input source
•Input Select Button (1-3): Select input source 1, 2, 3
Previous Next
Input Select Button

9
IR Extension cables (20-60Hz Frequency Range)
The IR Extension feature allows you to control your
HDMI source device from a remote location.
Figure 6: IR blaster
extension cable (IR OUT)
Figure 7: IR receiver
extension cable (IR IN)
•IR blaster extension cable (IR OUT): Plugs into the
Transmitter's IR Out socket. It emits the IR signals
received from the IR receiver extension cable of the
Receiver unit and directs it to the HDMI source's IR
receiver window
•IR receiver extension cable (IR IN): Plugs into the
Receiver's IR In socket. It receives IR signals from
the HDMI source's remote control and directs it to
the IR blaster extension cable of the Transmitter
unit
Note: Incorrect placement of the IR Blaster and IR
Receiver extension cables may result in failure of
these cables. Please check carefully before
plugging in the IR cables to ensure connecting to
the proper IR sockets.

10
Hardware Installation
1. Power off all devices including your HDMI source
and display.
2. Attach the included antennas to the TX and RX.
3. Connect your HDMI sources to the Transmitter's
HDMI IN connectors.
4. Optional: Connect the IR Blaster extension cable to
the Transmitter's IR Out. Face the eye towards your
HDMIdevice'sIRwindow.Thisconnectionisneeded
only if you need to control your HDMI source from
the remote location.
5. Connectyour HDMI displaytothe Receiver's HDMI
OUT connector with an HDMI cable (not included).
6. Optional: Connect your HDMI display to the
Transmitter's HDMI OUT. It's only needed when
local monitoring of the extended HDMI display is
required.
7. Optional: Connect the IR Receiver extension cable
to the Receiver's IR In. This connection is needed
only if you need to control your HDMI source from
the remote location.
8. Plug the included power adapters into the
Transmitter's and Receiver'sPower Jacks, then plug
both power adapters into reliable power outlets.
9. Poweron your HDMI devices and HDMI display(s).
10. Use the included remote control or built-in switch
button to select the same channel for the TX and RX
(for channel pairing).
11. The device is ready for use.