Silicon Laboratories CP240 Series User manual

Silicon Laboratories Inc. Copyright © 2009 by Silicon Laboratories Rev. 0.1 11/09
400 West Cesar Chavez
Austin, TX 78701
Email: [email protected]
Internet: www.silabs.com
CP240XLCD DEVELOPMENT KIT QUICK-START GUIDE
Installation
Connect CP240x LCD Development
Board to F9xx Target Board
Connect USB Debug Adapter to Target
Board with DEBUG Cable
Connect USB Cable to USB
Debug Adapter
From the Programs list in the
Start menu, select Silicon Laboratories
and click on the Silicon Laboratories IDE logo
8Silicon Laboratories IDE opens 9
Connect Power Supply
to Target Board
Note: Target Board may be powered
from USB Debug adapter
Note: Some Target Boards include options for
alternate power sources. See Development Kit
User's Guide for details.
Insert Development Kit CD in
CD-ROM Drive
Note: If autorun does not launch the
introduction window, run "SETUP.EXE" directly
from the CD.
Select “Install Development Tools”
from the introduction window and
follow the on-screen instructions
7
4Connect USB Cable to PC 5 6
321
P
1
CP2400
U
1
J5
J
1
D2D1
J2
IMEASURE
J5 J4
LE
D
PW
R
SILICONLABS
www.silabs.com
CP2400-GQ LCD
DEVELOPMENT BOARD
P0.2 P0.3
J3
J4
J2`
P
3
U3
P2
DEBUG
J9
RESE
T
J17
IMEASURE
H
2
SILICONLABS
www.silabs.com
H
1
J6
J5
J7 J13
F930
U
1
J14
J11
J10
VB
AT
WALL_PWR
AAA_BAT
COIN_CELL
J15
J16
R1
5
J12J8
J1
P1.6
P1.5
+1V
D
+3V
D
VBA
T
VDD/DC+
USB POWER
POWER OFF BEFORE
S
W
4
SWITCHI NG MODE
2 CELL 1 CELL
TOUCH
SENSE
SWITCH
P2
.1
TOUCH
SENSE
SWITCH
P2
.0
O
N
O
F
F
SW5
CP240x LCD
Development Board F9xx Target Board
This datasheet has been downloaded fromhttp://www.digchip.com at this page

2Rev. 0.1
Example Program
If you are having trouble installing and/or using the development kit, please use the following support resources:
CP2400 and CP2401 Development Kit User's Guide (click "Browse Documentation" from the CD introduction window)
Application Note “AN104: Integrating Keil 8051 Tools Into the Silicon Labs IDE"
(contains instructions for obtaining the 4 k limited version of the Keil toolset)
Latest versions of Application Notes can be found at https://www.silabs.com/products/mcu/Pages/ApplicationNotes.aspx
MCU Knowledgebase (available at www.silabs.com SUPPORT)
Contact an Applications Engineer using the online information request form (available at www.silabs.com SUPPORT Contact Technical Support).
16 17 18
Click on
“main.c” to
open source
file
13 15
Execute example program
Digits “01234567” will be
shown on the CP240x LCD
Development Board
14
Build and Download the Program
Select “Connection Options…” from
“Options” menu
1211 Connect to Target Board
Select C2
Debug Interface
Select USB
Debug Adapter
10 Select “Download Object File…” from
“Debug” menu
Next, click Browse
and select the hex
file “CP240x_Digits_
Example.hex”
located at “C:\SiLabs\
MCU\CP240x\
CP240x_LCD_Example”
Click Download
Stop execution of
example program
Application Note 104: Integrating Keil
8051 Tools Into the Silicon Labs IDE has
information on unlocking the evaluation
compiler from a 2k code size limit to a 4k
limit. It can be found on our application
notes page here:
https://www.silabs.com/products/mcu/
Pages/ApplicationNotes.aspx
The Keil Toolset Serial
Number is needed and
can be found on the Dev
Kit CD
Open Project file “CP240x_LCD_Example.wsp”
located at “C:\SiLabs\MCU\CP240x\
CP240x_LCD_Example\Source”
Follow the instructions in the C2400 and
CP2401 Development Kit User’s Guide to
modify the project and run other included
examples
The User’s Guide can be found under “Browse
Documentation” in the menu on Step 7 of this
Quick Start Guide