Silver Fox 2246BN User manual

Facial Chair
2246BN/2246EBN
Welcome to use our products. A1
Please read the user manual carefully before using the products.
Our company reserves the right to improve design and modify
the products without prior notice.
Shop tables & accessories at
ExamTablesDirect.com

1. About This Manual
This manual shall only be used for the reference of operation of this particular model. If the manual
is used for other purposes, SILVERFOX will not undertake any according consequences and responsibility.
All information of this manual shall be protected by copyright and shall not be copied and translated in
any part of this specification without the written consent of our company SILVERFOX.
Power must be cut off when changing electrical components or maintaining and cleaning machines.
The plug must be plugged into an outlet that is properly installed and grounded, to prevent the risk of fire
and electric shock.
Do not stand on this equipment.
Do not allow children to play with and place the equipment in a place where children can touch. Please
adjust the backrest to the highest position when you leave.
Please do not place the equipment in wet places such as bathroom to avoid electric shock or other failure;
Also keep the controllers away from water.
Please do not place and operate the equipment in places where is painting/coating or supplying oxygen.
Unless being monitored or instructed by personnel who can be responsible for their personal
safety, the people who have physical obstacles, tactile disorders, mental disorders, lack of
experience, common sense or children, are not allowed to use the equipment.
Please contact distributor, service center or related personal with appropriate skill and experience
for repairing if the plug is damaged, in case of any danger.
Please make sure there is no accessible thing within the stroke during any operation of the beds.
Operation should be processed by trained professionals.
2. Warning
This product should be used by an experienced person who must be familiar with the product structure,
performance and instructions. And make the regular maintenance work.
Read this manual carefully before installation, operation and adjustment. And please keep it well.
This product shall not be used for single side or single point loading work.
Comply with safety operation rules, product shall not be overloading, and to ensure that the product
safety protection equipment is complete and reliable, eliminates unsafe factors on time.
Tighten bolts and nuts regularly to avoid failure caused by loose, sliding, vibration and falling off.
During the maintenance, the operator shall not disassemble any parts of the bed at will.
This product is not allowed to operate when it's with fault. If abnormal phenomenon or abnormal sound
is found, it must be stopped for inspection immediately, and work can be resumed after troubleshooting.
The operator must be familiar with the precautions described in each section of the manual to ensure the
safety of person and product.
This product is equipped with a three-wire power cord. The power cord must be plugged into a three-hole
outlet which is properly installed and grounded. This is not only to prevent the risk of electric shock, but
ensure product can work properly.
Please operate the product strictly accordance with the warning label stamped on it.
While controlling the lifting , the button must be pressed continuously until the product in a suitable
position.
Please pay attention that the continuous working times should be Max. 2Min. ON ; 18Min. OFF, when
operating the motor.
Maintenance should be processed by trained professionals.
After every treatment, please only use neutral solution to clear the dust or stains on the product.
When adjusting each part, please keep your hands, feet and head away from the position indicated by the
arrow. (As shown in the photo)
3. Precautions
Shop tables & accessories at
ExamTablesDirect.com

4. I n s t a l l a t i o n
1. Put the product to a proper location, according to the overall layout, the daylighting or artificial lightings
and operation condition of the salon's or the home. And keep it in the clean, dry and cool environment.
2. Open the packing carton to check if the product is intact and whether the accessories or spares are
complete. Please contact distributor or us if there's any problem.
3. Installation
Place the product to the proper position. Please note that it is unnecessary to install extra screw on
the floor to fasten the bed, because the original design has taken the stability into consideration.
But please ensure the product is placed on a firm and flat ground, so as to prevent any accident. If the
product rotates or slant due to rough ground, please adjust the four pieces of plastic feet (M10×30)
and nuts (M10) by hexagon open-end wrench, which are fasten on the bottom panel, so as to ensure
the product is stable.
4. Connect the plug of product with power supply properly. (As shown in the photo)
Shop tables & accessories at
ExamTablesDirect.com

5. Structure of products
This product consists of control box, motor, wooden part, hardware, plastic parts and leather. Among them,
the control box is controlling the operation of the motors and the hand controller.
This product includes angle adjustment of the backrest, angle adjustment of the seat cushion and lifting
adjustment which is an overall and integral structure.
(As shown in the photo)
angle adjustment of the backrest
lifting adjustment
angle adjustment of the seat
angle adjustment of the footrest
2246BN 2246EBN
Photoelectric detector switch
Shop tables & accessories at
ExamTablesDirect.com

6. Operation Instruction
2246BN/2246EBN
Standard Configuration (Key Switches)
3
78
7
to the setting Positionto the setting Position
M1 M2
Press button right (left), backrest moves up (down),
angle increases (decreases) at a constant speed.
Press button right (left), seat moves up (down),
height increases (decreases) at a constant speed.
Press button right (left), seat inclines backward.
height increases (decreases) at a constant speed.
Press button right (left), legrest moves up (down),
angle decreases (decreases) at a constant speed.
Memory/Programmable postion setting: After adjusting the chair
to the requested position, press "M1" button for 2~3seconds,
when there is sound of "beep...beep...beep", it means the position
is set successfully.
Keep pressing the "safe-lock button" for about three seconds
lighting up the red light around the button, all the buttons can
not be operated except safe-lock button. Keep pressing the
safe-lock button for about three seconds again, the red button
lights go out, all the buttons return to normal operation status.
Shop tables & accessories at
ExamTablesDirect.com

2246EBN
8
Memory/Programmable postion setting: After adjusting the chair
to the requested position, press "M2" button for 2~3seconds,
when there is sound of "beep...beep...beep", it means the position
is set successfully.
Shop tables & accessories at
ExamTablesDirect.com

to the setting Position
1.The heating function is only available for the models with heating function.
2.Different hand controllers should be chosen according to different configuration.
Keep pressing the “safe-lock button” for about two
seconds, lighting up the red light around the button, all
the buttons can not be operated except safe-lock button.
Keep pressing the safe-lock button for about two seconds
again, the red button lights go out, all the buttons
return to normal operation status.
Adjustable headrest
SwitchTurn
Turn the switch to the right to
unlock. Then adjust the height of the
headrest up and down. Turn the switch to
the left to lock the headrest again
Shop tables & accessories at
ExamTablesDirect.com

M1 M2
Lighting adjustment
The adjustment is controlled by buttons on backrest and seat.
1. Short press the button " " to enter the lighting adjustment mode. The light around the buttons will
rapidly blink.
2. Press the button "M1" to change the color(total 16 kinds of modes）
3. Press the button "M2" to change the brightness（total of 12 kinds of gear）
4. Set the light color and brightness you need, and press button " " again to exit the lighting adjustment
mode. Or if no action is taken within 10 seconds, the lighting adjustment mode will automatically exit.
SET
LOCK
M1
M2
Control by hand control
1.Keep pressing “SET”/ “LOCK” for 2 seconds to enter the light regulating mode
2.press "M1" to choose the light mode (total 16 kinds of modes)
3.Keep pressing "M2" to adjust the brightness (total of 12 kinds of gear)
4.After choosing the light mode and light brightness, then Keep pressing "SET"/"LOCK" to
exit the light adjustment.
Shop tables & accessories at
ExamTablesDirect.com

Should disassemble foot extendor before bed goes to the lowest position
7. Operation Cautions
Please do not sit on the
backrest/footrest or jump to the
backrest/footrest, avoid the risk of
falling due to excessive force
fracture of the backrest/footrest
joint
Emergency Switch
Allows the operator to immediately stop the bed in case of an unexpected situation
Shop tables & accessories at
ExamTablesDirect.com

Loosen the screws of the handle rubber sleeve,
pull out the handle rubber sleeve
Handle rubber
sleeve screws
Handle rubber sleeve
Pull out the plastic screws,
remove the seat covers
Plastic Screws
Seat covers
Loosen the screws, pull the Quick Clip and the rotary table
block out of the Fillister.
Rotate the Quick Clip to remove the broken rotary table
block and replace it with a new one.
Guidelines：Replace the Rotary Table Block
Quick Clip
Screws
Rotary Table Block
Fillister
Shop tables & accessories at
ExamTablesDirect.com

10
Guidelines: Cushion Replacement
Seatrest:
Adjust the legrest and backrest as picture. Then pull
up the end of Seatrest (near the legrest) in direction 1
and push it in direction 2, easily remove the cushion
1
2
Backrest:
Pull up on the end of Backrest (near the seat
cushion). Then push it forward to remove the
cushion
Movable Footrest:
Pull out the plastic cover, use
a screwdriver to fix the buckle
and replace it with new.
Headrest:
Pull out the plastic cover,
use a screwdriver to replace
the pillow bracket with new
2
1
Fixed Footrest:
Pull up the end of Fixed Footrest (near
movable footrest). Then pull it upwards
to remove the cushion.
Shop tables & accessories at
ExamTablesDirect.com

11
8. Technical Parameters
Power
Maximum Power
Environment Temperature
Relative Humidity
Lifting Rated Load
AC 100-120V or AC 220-240V or AC 100-240V,50/60Hz
300W
0℃ ~ + 40℃
30% ~ 90%
200kg
Package Size
-120~+120°
Rotary
140×78×58cm
Shop tables & accessories at
ExamTablesDirect.com

12
9. Maintenance
1. After every treatment, please only use neutral solution to clear the dust, stains on leather, metal
part or other parts. Disinfecting solution like alcohol, acid or alkaline solution are forbidden.
This is to prevent the lifetime of the components from being shortened.
2. Please lubricate the moving parts regularly (once a year).
520
1810
840830
82°
85°
20°
3. After usage,please stay the upholstery flat to 180°.
4. When the headrest is stuck, it can be improved by applying lubricating oil.
Shop tables & accessories at
ExamTablesDirect.com

13
10. Circuit System Connection Diagram
Power
input EMIModule C-012 Control box
circuit board Control panel
Seat
Key switches
Backrest
Key switches
Function switches
Hand control
2246BN
height motor
Backrest motor Seatrest motor Footrest motor
Circuit System Diagram
Shop tables & accessories at
ExamTablesDirect.com

14
10. Circuit System Connection Diagram
Power
input EMIModule C-012 Control box
circuit board Control panel
Seat
Key switches
Backrest
Key switches
Function switches
Hand control Foot control
divider
Foot control
2246EBN
height motor
Backrest motor Seatrest motor Footrest motor
Circuit System Diagram
Shop tables & accessories at
ExamTablesDirect.com

If problem is still not solved after above operations,
please contact maintenance center or supplier to solve it.
Motor can’t work
normally
Abnormal Sound
1. The power cord is unconnected or
not plugged well.
1. The rotating parts are short of
lubricating oil.
2. Rotating positions (such as hinge,
POM sets, gas lift) are short of
lubricating oil.
2. Poor quality of the hand controller
or foot controller.
3. Poor quality of the control box.
4. Repture of motor tail.
5. Motor was damaged.
6. Emergency Switch has been
pressed but not reset.
3. Motor quality problems.
Connect the power cord or plug it well.
1. Add lubricating oil.
2. Add lubricating oil.
Replace the hand controller or foot
controller.
Please contact maintenance center or
supplier for troubleshooting.
Reset the emergency switch.
3. Replace the motor.
The Fault Phenomenon Reason Solution
12. Troubleshooting
15
Shop tables & accessories at
ExamTablesDirect.com