young time 212484 User manual

Page 1 of 4
WARNING:
CHOKING HAZARD/SHARP POINTS- Assembly
hardware contains small parts and components
with sharp points.
Adult assembly required.
Hardware Illustrations
Not Actual Size
Tools Required:
-4mm Hex Wrench, (Provided)
-Medium Phillips Screwdriver
Instructions for:
212484 Storage, Toddler
Hardware Package HCJC
Qty. Description
(1) XAUS 4mm Hex Wrench
(12)XAUR 2" Decorative Screw
(12)XAMT Camlock Bolt
(3) XCPT #8 X 0-7/8" Washerhead Screw
Parts:

Page 2 of 4
Assembly Instructions:
1. Install 12-XAMT Camlock Bolts into 5mm surface holes in Bottom-A, Top-C, and Shelf-Dusing a
Phillips Screwdriver.
2. Install Top-C, Shelf-D, and Bottom-Ato Side-Bby aligning dowels. Ensure back grooves all align.
Secure with 6-XAUR Decorative Screws with 4mm Hex Wrench provided.

Page 3 of 4
3. Place 3 Dividers-Eby aligning Camlocks in Dividers with Camlock Bolts previously installed. Secure
with a ¼ turn of the Camlocks with a Phillips Screwdriver.
4. Slide both Backs-Finto Top, Bottom, and Side grooves.
5. Align dowels with remaining Side-B. Secure with 6-XAUR Decorative Screws ensuring backs are
within grooves.

Page 4 of 4
6. Locate predrilled holes in middle shelf and install 3-XCPT Washer Head Screws using a Phillips
Screwdriver.
7. Stand unit upright.
8. If you experience any difficulties when assembling this product, please contact the Jonti-Craft