1
Produced in China for Next Retail Ltd.
2020-V1
BEFORE YOU START
Warnings
●We suggest you retain these instructions for future reference
●Keep fittings out of children’s reach and keep children well
away from construction area.
●This product should only be used on firm, level ground .
●Please periodically check all fittings and re-tighten as
necessary .
●Please do not jump or stand on your bed.
●Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause cracking of the wood and
deterioration of the colour .
●Keep away from strong heat sources.
●Do not use this item if components are missing or broken.
●Keep fingers away from moving parts to avoid any possible
injury.
Do's
Don'ts
Number of people required to assemble
Two persons are required to assemble this item.
Time to assemble
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacementto be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
30 min.
To View our full furniture range please visit www.next.co.uk
●We suggest you spend a short time reading through this
leaflet before you start .
●When you are ready to start,make sure that you have the
right tools and plenty of space .
●Due to the size of the product we recommend that it is
assembled in the roomintended for use.
●Unwrapall packaging materials and place the components
on a clean surface to protect it fromdamage,We
recommend that the packaging is used to protect the
surfaces during assembly .
●Carefully checkthat you have all the parts before beginning
assembly .
●Ensure the product is fully assembled as illustrated and all
fixings fully tightened before use.
●Checkfixings regularly to ensure they remain tight .
●When adjusting the support legs,ensure that the foot is set
10mm fromthe floor surface without the mattress in place.
When in use the legs will create the required support.
●Always ensure that protectors are used on the legs according
to your flooring type.
●Ensure that the bed is assembled as per the instructions,all
fittings are tightened and slats are secure before placing your
mattress.
●To clean your items,please lightly wipe with a slightly
dampened cloth.
●For leather items dust regularly with a soft cloth,preferably
once a week, to keepthe leather pores free fromdust particles.
●For velvet items use a soft brush lightly dress the fabric.
Lightly wipe with a slightly dampened cloth to clean.
●For velvet items avoid scratching the fabric as the pile may
not recover and permanently markit.
●Do not drag your assembled bed. Always lift the bed and
checkthat the centre support rail is securely fixed in place.
●Do not apply Adhesive substrates for example,
sticky tape to the product
●Do not use silicone based furniture polish. Silicone in
furniture polishes can breakdown the lacquer finish
●Never allowany kind of liquid to remain on your furniture.
Absorption can cause finishes to de-laminate and or stain
●Please do not jump or stand on your bed
STELLA DAYBED
