Silvercrest 314863 User manual

IAN 314863
BLENDER SSMC 600 B1
STANDMIXER
Bedienungsanleitung
BLENDER
Operating instructions
ΜΠΛΕΝΤΕΡ
Οδηүίες χρήσης

GB/IE/NI/CY Operating instructions Page 1
GR/CY Οδηүίες χρήσης Σελίδα 19
DE/AT/CH Bedienungsanleitung Seite 37
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις λειτουργίες
της συσκευής.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

GB│IE│NI│CY │ 1 ■SSMC 600 B1
Content
Introduction ...................................................2
Intended use ..................................................2
Package contents ..............................................2
Description of the appliance .....................................3
Technical data .................................................3
Safety instructions .............................................4
Unpacking ....................................................6
Setting up.....................................................6
Operation ....................................................7
Fitting and filling the blender ............................................... 7
Selecting the speed setting ................................................. 8
Filling while in use ........................................................ 8
Removing the blender ..................................................... 9
Useful tips ....................................................9
Recipes......................................................10
Banana shake .......................................................... 10
Vanilla shake ...........................................................10
Cappucino shake........................................................ 10
Tropical mix ............................................................ 10
Nut nougat shake .......................................................11
Carrot shake ...........................................................11
Blackcurrant mix ........................................................11
Hawaii shake........................................................... 11
Fruity pineapple and strawberry mix......................................... 11
Andalusian cold soup (gazpacho) .......................................... 12
Cleaning.....................................................12
Cleaning the blender.....................................................13
Cleaning the motor block .................................................15
Storage .....................................................15
Disposal .....................................................15
Kompernass Handels GmbH warranty............................16
Service................................................................17
Importer ............................................................... 17

■ 2 │ GB│IE│NI│CY SSMC 600 B1
Introduction
Congratulations on the purchase of your new appliance.
You have selected a high-quality product. These operating instructions are a
part of this product. They contain important information on safety, usage and
disposal. Before using the product, familiarise yourself with all operating and
safety instructions. Use the product only as described and only for the specified
areas of application. In addition, pass these documents on, together with the
product, to any future owner.
Intended use
This appliance is intended exclusively for…
■ mixing, puréeing and stirring foods as well as crushing ice cubes,
■ use exclusively in normal domestic amounts and only for private use in a
domestic environment in dry rooms.
This appliance is not intended for…
■ the chopping of hard foodstuffs, such as nuts, seeds, large kernels or stalks,
■ the processing of materials that are not foodstuffs,
■ commercial or industrial use,
■ for use in damp environments or outdoors,
■ processing hot/boiling liquids.
Use only the accessories and spare parts that are specified for this appliance.
Other parts may not be adequately suitable or safe!
Package contents
After unpacking, check to ensure all items are available. The package contains:
▯ Motor block, with power cable and plug
▯ Blender
▯ Lid
▯ Measuring cap
▯ Operating instructions

GB│IE│NI│CY │ 3 ■SSMC 600 B1
Description of the appliance
1Measuring cap
2Lid
3Blender
4Cutting blades
5Switch
6Motor block
7Cable retainer
8Scale
9Rubber lid seal
Technical data
Nominal voltage 220–240 V ∼ (alternating current), 50– 60 Hz
Nominal power consumption 600 W
Max. capacity 1.75 litres
Protection Class II / (double insulation)
CO time 3 Minuten
All of the parts of this appliance that come into
contact with food are food-safe.
The CO time (continuous operation time) is the amount of time an appliance can
be operated without the motor overheating and becoming damaged. When the
specified CO time has been reached, the appliance must be switched off until
the motor has cooled down to room temperature.

■ 4 │ GB│IE│NI│CY SSMC 600 B1
Safety instructions
DANGER! ELECTRIC SHOCK!
► Ensure that the appliance, the power cable and the power
plug are never immersed in water or other liquids.
► Use the appliance only in dry rooms; never use it outdoors
or in damp environments.
► Ensure that the power cable never becomes wet or damp
during operation. Route the power cable in such a way that
it cannot become trapped or damaged in any way.
► Arrange for defective power plugs and/or cables to be
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury.
► Always remove the plug from the power socket after use.
Switching off the appliance is not sufficient because the
appliance receives power as long as the power plug is
connected to the socket.
► Check to ensure that the appliance is in a serviceable
condition before use. The appliance may not be used if it
shows signs of damage, especially to the motor block or the
blender attachment.
► Remove the plug from the socket immediately if you notice
unexpected smells or noises coming from the appliance
while it is in use or if there is an evident malfunction.
WARNING! RISK OF INJURY!
► NEVER insert your hand or fingers into the blender, especially
when it is in use. The cutting blades are extremely sharp!
► DO NOT remove the lid when the appliance is in operation.
► To ensure you can react immediately in the event of danger,
never leave the appliance running unattended.
► Do not insert cutlery items or mixing tools into the blender while
the appliance is in use. There is a considerable risk of injury if
these come into contact with the swiftly rotating cutting blades!

GB│IE│NI│CY │ 5 ■SSMC 600 B1
WARNING! RISK OF INJURY!
► Children should be supervised to ensure that they do not
play with the appliance.
► Never use the appliance for purposes other than those described
in these instructions.
► Risk of injury if appliance is misused.
► The appliance should always be disconnected from the mains
when not supervised and before assembly, disassembly or
cleaning.
► This appliance is not to be used by children.
► The appliance and its mains cable must be kept away from
children.
► This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning safe use of the appliance, and if they are aware
of the potential risks.
► Do not allow children to play with the appliance.
► Be careful when handling the appliance. The cutting blades
are extremely sharp!
► Take care when emptying the blender! The cutting blades
are extremely sharp!
► Take care when cleaning the appliance! The cutting blades
are extremely sharp!
► Switch the appliance off and disconnect the plug from the
power supply before changing accessories or getting hold
of parts that move during operation.
► Always make sure that the blender is switched off before
removing the jug from the motor block!
► Use the blender only with the supplied motor block!

■ 6 │ GB│IE│NI│CY SSMC 600 B1
CAUTION! MATERIAL DAMAGE!
► Do not use the appliance in direct sunlight or near any
heatgenerating appliances.
► NEVER fill the blender with boiling liquids or other foods!
Allow these to cool to a lukewarm temperature.
► NEVER operate the appliance when it is empty, i.e. without
ingredients in the blender attachment.
Unpacking
■ Remove all packaging materials or protective films from the appliance. Retain
the packaging, so that you can store the appliance safely or send it by post,
e.g. if it needs to be repaired.
■ Before using the appliance, check that it is free of damage; check also that
the power cable and plug as well as all accessories and appliance parts are
undamaged.
■ Clean all components carefully before using the appliance for the first time
(see “Cleaning”).
Setting up
Once all components have been cleaned as described in the section “Cleaning”:
■ Position the appliance so that, …
–that the mains cable passes through the recess at the rear of the
appliance,
–the power plug is immediately accessible, so that it can be quickly
withdrawn in the event of danger,
–that it is stable and not liable to slip, and so that the sucker feet can attach
firmly and the appliance cannot tip over due to vibration,
–that the mains cable is not in the working area and thus does not present
a risk of being inadvertently snagged and tipping the appliance over.

GB│IE│NI│CY │ 7 ■SSMC 600 B1
Operation
WARNING!
► The motor switches off automatically as soon as the blender 3is removed
from the motor block 6or the lid 2is opened. In such cases it may be
easy to forget that the machine is still switched on. The motor will then start
unexpectedly as soon as the blender attachment 3is fitted or the lid 2is
closed again:
Therefore:
–Do not insert the power plug into the wall socket until the blender 3 is
filled and mounted with its lid fitted and closed.
–Before fitting the blender, always check to see that the appliance is
switched off or that the power plug has been removed.
–Switch the appliance off first, pull the plug out and wait until the motor has
come to a standstill before removing the blender 3or opening the lid 2.
Fitting and filling the blender
1) Remove the blender 3from the motor block 6in a vertical, upward motion.
2) Remove the lid 2by rotating it anticlockwise towards position (see Fig 1)
until you can pull it upwards.
3) Fill the blender 3.
4) Press the lid 2 firmly down onto the blender 3. Close the lid 2 by turning
it clockwise to position until it audibly engages (see Fig. 2). Ensure that
the pouring spout on the blender 3is closed. The motor cannot start until
the lid2is fitted flush.
Fig. 1 Fig. 2
5) Press the measuring cap 1into the lid as far as the stop.
6) Place the completely filled and closed blender 3with the handle to the
right on the motor block 6. Make sure that the arrow qon the blender 3
points to the arrow on the motor block 6. Turn the blender 3 slightly
back and forth if it does not immediately sit properly. The motor cannot start
until the blender 3is fitted flush to the motor unit.

■ 8 │ GB│IE│NI│CY SSMC 600 B1
Selecting the speed setting
Once the blender 3is filled and sitting completely closed on the motor block 6,
you can switch on the appliance.
Set the switch 5to…
■Level 1– 3
for liquids or soft foodstuffs, for mixing, blending and stirring
■Level 3– 5
for more solid foods or for chopping
■Level P (pulse function)
for short, powerful impulse operation, e.g. for crushing ice cubes or when
cleaning. To prevent overloading the motor, the switch 5does not lock in this
position. Therefore, hold the switch 5 in this position for short periods only.
NOTE
► Fill the blender 3 with a maximum of 180 g of ice cubes.
Otherwise, the ice cubes will not be crushed optimally.
Filling while in use
WARNING!
► If you want to add additional foods during operation, use only the measuring
cap 1 provided for this purpose. Do NOT open the lid 2.
► Do not insert cutlery items or mixing tools into the blender 3while the
appliance is in use. There is a considerable risk of injury if these come into
contact with the swiftly rotating cutting blades 4!
To add more food while the appliance is in use,…
1) Remove the measuring cap 1from the lid 2.
2) Add the ingredients.
3) Press the measuring cap 1back into the lid.

GB│IE│NI│CY │ 9 ■SSMC 600 B1
Removing the blender
Once you have finished processing the food in the attachment:
1) Always start by setting switch 5to the off position (“0”) and pulling out the
mains plug.
2) Wait until the motor has come to a complete standstill before lifting the
blender 3 off the motor block 6. Remove the blender 3from the motor
block 6in a vertical, upward motion.
Useful tips
■ To achieve the best results when puréeing firm ingredients, add small amounts
one after the other into the blender 3 rather than a single large portion.
■ When processing firm ingredients, cut them into small pieces (2–3 cm).
■ When mixing liquid ingredients, start off with a small amount of liquid.
Gradually add more liquids to the mixture through the measuring cap.
■ The appliance can be stabilised by placing your hand on top of the closed
blender during operation.
■ When stirring firm or very viscous foods, it can be helpful to use the level Pto
avoid a blocking of the cutting blades 4.
NOTE
► Do not use the appliance to grind crystals of cooking salt, refined sugar or
white sugar. For example, to make powdered sugar.

■ 10 │ GB│IE│NI│CY SSMC 600 B1
Recipes
Banana shake
▯ 2 bananas
▯ approx. 2 tbsp. sugar
(depending on the ripeness of the bananas and personal taste)
▯ ½ l milk
▯ 1 dash of lemon juice
Peel the bananas and liquidise them at level 2. Gradually add the milk, then the
sugar and the lemon juice. Keep mixing everything until you have a smooth and
uniform liquid. Serve the shake chilled.
Vanilla shake
▯ ¼ l milk
▯ 250 g vanilla ice cream
▯ 125 g ice cubes
▯ 1½ tsp. sugar
Crush the ice cubes using the level P. Place the remaining ingredients into the mixer.
Mix everything at Level 2 until the liquid has a smooth consistency.
Cappucino shake
▯ 65 ml cold espresso (or a very strong coffee)
▯ 65 ml milk
▯ 15 g sugar
▯ 65 g vanilla ice cream
▯ 100 g ice cubes
Crush the ice cubes using the level P. Add the espresso, milk and sugar. Mix
everything together at level 2 until the sugar has dissolved. Finally, add the
vanilla ice cream and then briefly mix everything together at level 1.
Tropical mix
▯ 125 ml pineapple juice
▯ 60 ml papaya juice
▯ 50 ml orange juice
▯ ½ small tin of peaches with juice
▯ 125 g ice cubes
Crush the ice cubes using the level P. Place all ingredients into the mixer and
blend them together at level 3.

GB│IE│NI│CY │ 11 ■SSMC 600 B1
Nut nougat shake
▯ ½ l milk
▯ 200 g nut nougat spread
▯ 1 scoop of vanilla ice cream
▯ 50 ml cream
Add all the ingredients to the blender and mix at level 3 until everything is evenly
blended together.
Carrot shake
▯ 300 ml apple juice
▯ 500 ml carrot juice
▯ 4 tbsp. cooking oil (wheatgerm oil or rapeseed oil)
▯ 4 tbsp. of lemon juice
▯ Powdered ginger
▯ Pepper
Add the apple juice, cooking oil and lemon juice into the blender and mix
everything together at level 2. Then add the carrot juice and mix everything
together at level 2. To finish, add the powdered ginger and pepper to taste.
Blackcurrant mix
▯ 2 tsp. honey
▯ 2 bananas
▯ ¼ l buttermilk
▯ ¼ l blackcurrant juice
Place all ingredients into the mixer and blend them together at level 3.
Hawaii shake
▯ 4 bananas
▯ ¼ l pineapple juice
▯ ½ l milk
▯ 2 tbsp. honey
▯ ¼ l rum
Peel the bananas and liquidise them at level 2. Then add the other ingredients
and mix everything together at level 1.
Fruity pineapple and strawberry mix
▯ 250 ml pineapple juice
▯ 200 g strawberries
▯ 300 ml apple juice
▯ 4 ice cubes
Wash the strawberries and remove the green parts. Crush the ice cubes using
the level P. Liquidise them at level 2. Then add the other ingredients and mix
everything together at level 1.

■ 12 │ GB│IE│NI│CY SSMC 600 B1
Andalusian cold soup (gazpacho)
▯ ½ cucumber
▯ 1 large tomato
▯ 1 green pepper
▯ ½ onion
▯ 1 garlic clove
▯ ½ white bread roll
▯ ½ tsp. salt
▯ 1 tsp. red wine vinegar
▯ 1 tbsp. olive oil
Cut the vegetables into pieces approx. 2 cm in size. Start by adding the first the
tomatoes and then the cucumber to the blender. Liquidise them at level 3. Add
the remaining ingredients and then liquidise/blend them all together at level 3
until a smooth soup is created. Serve the soup with bread.
NOTE
► These recipes are provided subject to change. All ingredients and
preparation information are guiding values. Adapt these recipe suggestions
based on your personal experience.
NOTE
► In cases of lactose intolerance, we recommend you use a lactose-free milk.
Keep in mind, however, that lactose-free milk is a little sweeter.
Cleaning
DANGER! ELECTRIC SHOCK!
Before starting to clean the blender and its components:
► Ensure that the motor is switched off and the power plug removed from the
socket.
Do not immerse the motor block 6 in water or other liquids. This could
result in you receiving a fatal electric shock and cause damage to the
appliance.
► Never open the housing of the appliance. Otherwise, there is a risk of a
fatal electric shock.
WARNING! RISK OF INJURY!
► Handle the cutting blades 4with extreme caution. They are extremely
sharp!
CAUTION! PROPERTY DAMAGE!
► Do not use solvents or abrasive cleaners on the plastic surfaces, they could
be damaged by them.

GB│IE│NI│CY │ 13 ■SSMC 600 B1
Cleaning the blender
■ To prevent injuring yourself on the cutting blades 4, clean the blender 3 only
with a long-handled washing-up brush.
■ Clean the measuring cap 1and the lid 2in a mild soap solution. You can
remove the rubber seal 9 to clean the blender lid by hand. Make sure that
the rubber seal 9 is correctly reattached before you use the lid 2 again
(Fig. 3).
Fig. 3
NOTE
You can also clean the lid 2together with the rubber seal 9, the
measuring cap 1and the blender attachment 3in the dishwasher
along with the cutting blades 4. We recommend not removing the
rubber seal 9when cleaning in the dishwasher, as it might otherwise deform.
If possible, place the plastic parts in the upper basket of the dishwasher and
make sure that they are not jammed. Otherwise, they could become
misshapen or suffer from stress cracks.
■ If you clean the blender directly after use, you can often achieve a
satisfactory and hygienic level of cleaning by doing the following:
Fill the blender attachment 3with 750 ml of water and add a drop of
washing up liquid. Close the lid 2 and fit the blender attachment 3 onto
the motor unit 6. Insert the mains plug into the socket and activate the pulse
function a few times so that the cutting blades 4 plough through the water
at maximum speed. Afterwards, rinse the blender attachment 3with plenty
of clean water to remove any washing up liquid residues.
■ Dry all parts thoroughly before reusing or storing them.

■ 14 │ GB│IE│NI│CY SSMC 600 B1
■ If this does not remove the dirt, you can remove the lower plastic part of the
blender attachment 3with the cutting blades 4from the glass part of the
blender 3:
A
C
B
Fig. 4
AGlass part
BSealing ring
CPlastic part with blades
1) Remove the blender 3from the motor unit 6. For better stability, remove
the lid 2by turning it anticlockwise towards position (see Fig 1) until
you can pull it off upwards.
2) Turn the appliance upside down and turn the plastic part C of the
blender3anticlockwise so that it can be detached from the glass part A
of the blender attachment 3(see fig. 4).
3) Clean both parts in a mild soap solution or in the dishwasher.
4) You can carefully remove the sealing ring B from the plastic part C if
necessary. Clean in mild soapy water and rinse with clear water.
5) Dry all parts thoroughly before reassembling them.
6) If necessary, reinsert the sealing ring B into the plastic part C correctly.
Then place the plastic part C of the blender 3back on the glass part A
of the blender 3 and turn the plastic part Cclockwise.

GB│IE│NI│CY │ 15 ■SSMC 600 B1
Cleaning the motor block
■ If necessary, clean the motor unit 6and its mains cable with a damp cloth.
For stubborn stains, apply a mild detergent to the cloth and wipe off with a
cloth moistened only with water. Dry everything well afterwards.
■ When cleaning, always check that the contact switch in the fitting for the
blender 3 is not blocked by soiling residues. If you cannot dislodge any
blockages with the corner of a piece of paper, make contact with Customer
Services. Do not use any hard objects, these could damage the contact
switch.
Storage
1) If you do not intend to use the blender for an extended period, clean it
thoroughly (see chapter “Cleaning”).
2) Wrap the power cable around the cable retainer 7on the base of the
motor block 6.
3) Store the blender in a cool and dry location.
Disposal
Do not dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility. Please comply with all applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
The packaging is made from environmentally friendly material and can be
disposed of at your local recycling plant.

■ 16 │ GB│IE│NI│CY SSMC 600 B1
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this
product has any faults, you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in
a safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the date of
purchase of the product, we will either repair or replace the product for you or
refund the purchase price (at our discretion). This warranty service requires that
you present the defective appliance and the proof of purchase (receipt) within
the three-year warranty period, along with a brief written description of the fault
and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired or
replaced by us. The repair or replacement of a product does not signify the
beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty.
This also applies to replaced and repaired components. Any damage and
defects present at the time of purchase must be reported immediately after
unpacking. Repairs carried out after expiry of the warranty period shall be
subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality
guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not
extend to product parts subject to normal wear and tear or to fragile parts which
could be considered as consumable parts such as switches, batteries or parts
made of glass.
The warranty does not apply if the product has been damaged, improperly used
or improperly maintained. The directions in the operating instructions for the
product regarding proper use of the product are to be strictly followed. Uses and
actions that are discouraged in the operating instructions or which are warned
against must be avoided.
This product is intended solely for private use and not for commercial purposes.
The warranty shall be deemed void in cases of misuse or improper handling, use
of force and modifications/repairs which have not been carried out by one of
our authorised Service centres.

GB│IE│NI│CY │ 17 ■SSMC 600 B1
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
■ Please have the till receipt and the item number (e.g. IAN12345) available
as proof of purchase.
■ You will find the item number on the type plate on the product, an engraving
on the product, on the front page of the operating instructions (below left) or
on the sticker on the rear or bottom of the product.
■ If functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the service address
that will be provided to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals,
product videos and installation software at www.lidl-service.com.
This QR code will take you directly to the Lidl service page
(www.lidl-service.com) where you can open your operating instructions
by entering the item number (IAN) 123456.
Service
Service Great Britain
Tel.: [phone]
E-Mail: kom[email protected]
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kom[email protected]
CY Service Cyprus
Tel.: [phone]
E-Mail: kom[email protected]
IAN 314863
Importer
Please note that the following address is not the service address. Please use the
service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
GERMANY
www.kompernass.com