
- 4 -
Preparing for use
When all components have been cleaned as described
under “Cleaning”:
³Position the appliance such that, ...
– that the power cable ypasses through the re-
cess at the rear of the appliance,
– the power plug is immediately accessible, so that
it can be quickly withdrawn in the event of
danger.
– that it is stable and not liable to slip, and such
that the suction cups find a firm hold so that the
appliance cannot tip over due to vibration.
– that the power cable yis not in the working
area and thus not presenting a risk of being inad-
vertently snagged and tipping the appliance
over.
Operation
Warning!
The motor switches itself off as soon as the mixing
jug eis removed from the motor block u. It could
then be overlooked that the appliance is still swit-
ched on. The motor will thus start of its own accord
as soon as the mixing jug eis replaced on it:
Therefore:
• First insert the power plug into the wall socket
when the mixer jug eis filled and mounted with
its lid fitted and closed.
• Before mounting the mixing jug always check to
see that the appliance is switched off or that the
power plug has been removed.
• Before removing the mixer jug e, switch the ap-
pliance off, remove the power plug and wait for
the motor to stop revolving.
Filling and mounting the mixer jug
³Take the mixer attachment efrom the motor unit
uand remove the lid w.
³Fill the mixer attachment eand then press the
lid wfirmly back onto the mixer attachment e.
Ensure that the pourer nose on the mixer attach-
ment eis also closed.
³Insert the filling cap qinto the lid opening and
secure it by turning it clockwise.
³Place the ready filled and sealed mixer jug e
onto the motor block u. Lightly turn the mixer
jug euntil you can press it down. The motor
can start only when the mixer jug eis securely
positioned.
Selecting operating speeds
When the mixer jug eis filled, completely sealed
and securely fitted to the motor block u, you can
then switch the appliance on.
³Place the switch ton ...
–Level 1-3
for fluid or soft foodstuffs, for mixing, blending
and stirring
–Level 3-5
for firmer foodstuffs or for hacking
–Level Ice Crush/Clean
for short, powerful impulse operation, e.g. for
crushing icecubes or when cleaning. So as not
to overburden the motor, the switch tdoes not
engage in this position. Hence, hold the switch
tin this position for short periods only.
Notice
Fill the mixer attachment ewith a maximum of
180 g of ice cubes. If filled with more than this, the
appliance cannot optimally crush them.
IB_66711_SSM550B1_LB6 28.04.2011 13:46 Uhr Seite 4