Silvercrest SDK 2500 C1 Product information sheet

V 1.1
English ................................................................................................................ 2
Ελληνικά........................................................................................................... 19
Deutsch............................................................................................................. 38

SilverCrest SDK 2500 C1
2 - English
Table of Contents
1. Intended use ................................................................................................... 3
2. Package contents............................................................................................ 4
3. Technical specifications ................................................................................... 5
3.1 Energy consumption.......................................................................................................................6
4. Safety instructions .......................................................................................... 7
5. Copyright...................................................................................................... 11
6. Before you start............................................................................................ 11
6.1 Switching on/off ......................................................................................................................... 11
6.2 Setup/First use ............................................................................................................................ 11
6.3 How the status indicators (6, 7) work ....................................................................................... 12
7. Getting started.............................................................................................. 12
7.1 Energy-efficient cooking.............................................................................................................. 12
7.2 Usage .......................................................................................................................................... 12
8. Cleaning ....................................................................................................... 13
8.1 Storage when not in use............................................................................................................. 13
9. Troubleshooting............................................................................................ 14
10. Environmental regulations and disposal information.................................. 15
11. Conformity notes ........................................................................................ 16
12. Warranty information ................................................................................ 17

SilverCrest SDK 2500 C1
English - 3
Congratulations!
By purchasing the SilverCrest SDK 2500 C1 dual hotplate, hereinafter referred to as the hotplate, you
have opted for a quality product.
Before first using it, familiarise yourself with the way the hotplate works and read these operating
instructions through carefully. Be careful to follow the safety instructions and only use the hotplate as
described in the operating instructions and for the applications given.
Keep these operating instructions in a safe place. If you pass the hotplate on to someone else, make
sure to give them all the relevant documents with it.
1. Intended use
This hotplate is designed exclusively for heating food. It may not be used outdoors or in tropical
climates. The hotplate has not been designed for corporate or commercial applications. Use the
hotplate in domestic environments for private applications only. Any other use does not correspond to
the intended use. This hotplate fulfils all that relates to CE Conformity, relevant norms and standards.
Any modifications to the hotplate other than changes recommended by the manufacturer may result in
these standards no longer being met. The manufacturer accepts no liability for any damage or
malfunctions resulting from this. Only use accessories supplied with the device by the manufacturer.
Observe the regulations and laws in the respective country of use.

SilverCrest SDK 2500 C1
4 - English
2. Package contents
Remove the hotplate and all accessories from the packaging. Remove the packaging material and
check that all components are complete and undamaged. If you find anything missing or damaged,
please contact the manufacturer.
•SilverCrest SDK 2500 C1 dual hotplate
•These operating instructions
On the inside of the cover is a diagram of the dual hotplate with all its control elements numbered. The
meanings of the numbers are as follows:
1 Large hotplate
2 Power cable
3 Small hotplate
4 ON/OFF switch
5 Thermostat (small hotplate)
6 Status indicator (small hotplate)
7 Status indicator (large hotplate)
8 Thermostat (large hotplate)

SilverCrest SDK 2500 C1
English - 5
3. Technical specifications
Device:
Manufacturer TARGA GmbH
Name SilverCrest SDK 2500 C1
Power supply 220 - 240 V~, 50 - 60 Hz
Power consumption 2500 W
Power Consumption 192.9 Wh/kg
Protection class I
Dimensions (W x H x D) approx. 478 x 82 x 295 mm
Weight approx. 2360 g
Large hotplate:
Diameter 185 mm
Power consumption 1500 W
Energy consumption 194.3 Wh/kg
Small hotplate:
Diameter 155 mm
Power consumption 1000 W
Energy consumption 191.5 Wh/kg
The technical data and design may be changed without prior notice.

SilverCrest SDK 2500 C1
6 - English
3.1 Energy consumption
(tested in accordance with EU regulation 66/2014, Appendix I, Sections 2 and 2.2)
Symbol Value Unit
Model name SDK 2500 C1
Hob type -Domestic hotplate -
Number of hotplates and/or
zones -2-
Heating technology (induction
plates and zones, radiated heat
cooking zones, hotplates)
- Cooking plates -
For round hotplates or zones:
Diameterof usable area for each
cooking zone, rounded to the
nearest 5 mm
Ø 185 155 mm
For non- circular hotplates or
zones: Length and width of usable
area for each electrically heated
hotplate or zone, rounded to the
nearest 5 mm
L N/A cm
BN/A cm
Energy consumption for each
hotplate or zone, calculated per kg
ECElectric
cooking
194.3 191.5 Wh/kg
Energy consumption of hotplate
per kg EC hotplate 192.9 Wh/kg

SilverCrest SDK 2500 C1
English - 7
4. Safety instructions
Before you use this device for the first time, please read the
following notes in this manual and heed all warnings, even if you
are familiar with handling electronic devices and household
devices. Keep these operating instructions in a safe place for
future reference. If you sell the device or pass it on, it is essential
that you also hand over these operating instructions. The
operating instructions are part of the product.
Explanation of symbols used
DANGER! This signal word indicates a danger with a
high risk, which will lead to death or major injuries if not
avoided.
WARNING! This signal word indicates a danger with
a moderate risk, which can lead to death or major
injuries if not avoided.
ATTENTION! This signal word indicates a danger with
a low risk, which can lead to minor or moderate injuries
if not avoided.
CAUTION! This signal word indicates important
instructions to protect against damage to property.
DANGER! This symbol denotes danger for human
health and risk of death and/or risk of damage to
property due to electric shock.
DANGER! This symbol denotes danger for human
health from burning.
This symbol points out that you should never immerse the
hotplate in water or other liquids.
This symbol denotes further information on the topic.

SilverCrest SDK 2500 C1
8 - English
Protective earth conductor
AC voltage
Foreseeable misuse
•Use the hotplate in accordance with its intended purpose.
Improper use of the device can cause injuries.
•The hotplate may not be used with an external timer or a
separate remote control system.
•The hotplate may not be used with an extension cable.
Personal safety
•This device may be used by children older than 8 years as well
as by persons with reduced physical, sensory or mental
capacities or those persons who have lack of knowledge or
experience, as long as they are supervised or they have
received instructions regarding the proper use of the device
and they understand the associated risks.
•Do not allow children to play with the device.
•User cleaning and maintenance should not be carried out by
children unless they are aged 8 or over and are under
supervision.
•Children under the age of 8 must be kept away from the device
and the power cable (2).
DANGER! Packaging material is not a toy. Do not
allow children to play with plastic bags. There is a risk of
suffocation.
Keep the device out of the reach of children.

SilverCrest SDK 2500 C1
English - 9
General safety instructions
DANGER: Risk of burns
•Never touch the hotplates (1, 3) either during or immediately
after use
•Clean the hotplate only after it has completely cooled down.
After use, the surface of the hotplates (1, 3) will retain some
residual heat.
DANGER: Risk of electric shock
•If the power cable of this device is damaged, it must be
replaced by the manufacturer, its customer service or a similarly
qualified person, in order to avoid any possible danger.
•Never open the housing of the hotplate as there are no
components inside which require maintenance. Opening the
housing can expose you to the risk of electric shock.
•If you notice any smoke, unusual noises or strange smells,
switch the hotplate off immediately and disconnect the mains
plug from the socket. If this occurs, the hotplate should not be
used before it has been inspected by authorised service
personnel. Never inhale smoke from a possible device fire. If
you do inadvertently inhale smoke, seek medical attention.
Smoke inhalation can be damaging to your health.
•Make sure that the power cable (2) cannot be damaged by
sharp edges or hot spots. After use, always wind the power
cable (2) back around the cable wrap underneath the
hotplate.
•Make sure that the power cable (2) cannot become crushed or
squashed.

SilverCrest SDK 2500 C1
10 - English
•The device must always be disconnected from the mains when
left unsupervised and before assembly, disassembly or
cleaning.
•When disconnecting the power cable from the mains socket,
always pull on the mains plug and never on the power cable
(2) itself.
•Never use the device in the vicinity of the bathtub / shower or
over a sink filled with water. Proximity to water poses a risk
even if the device is switched off.
•If you notice visible damage to the hotplate or the power cable
(2), switch the hotplate off immediately, disconnect the mains
plug from the mains socket and contact our hotline.
•Only connect the hotplate to a properly installed, easily
accessible wall outlet whose mains voltage corresponds to that
on the rating plate. No action is required by the user to set the
product to 50 or 60 Hz. The product automatically adjusts to
50 and to 60 Hz. After connecting the device, the mains socket
must still be easily accessible so that you can remove the mains
plug quickly in the event of an emergency.
DANGER of fire
•Never leave the device unattended when in use.
•Maintain a clearance of at least 50 cm around the hotplate to
flammable and combustible materials. There is a risk of fire.
•Disconnect the hotplate from the mains power if you do not
intend to use it for an extended period. The hotplate is live
unless you disconnect the mains plug from the mains socket.

SilverCrest SDK 2500 C1
English - 11
WARNING about property damage
•Never place any objects on the hotplate.
•Only operate the hotplate on an even, stable and heat-resistant
surface.
•Never leave the hotplate unattended when in use.
•Disconnect the mains plug from the mains socket when the
hotplate is unattended.
5. Copyright
All the contents of this user manual are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the author
is strictly forbidden. This also applies to any commercial use of the contents and information. All texts
and diagrams are up-to-date as of the date of printing. Subject to change without notice.
6. Before you start
Remove the hotplate and all accessories from the packaging and check that the package contents are
complete. Remove any protective films. Keep the packaging material away from children and dispose
of appropriately.
6.1 Switching on/off
•Switch the ON/OFF switch (4) on the side of the device to the “I” position to switch on the dual
hotplate.
•Switch the ON/OFF switch (4) on the side of the device to the “0” position to switch off the dual
hotplate.
•To switch the hotplates (1, 3) on, twist the relevant thermostat (5, 8) clockwise away from the
“MIN” position. The “MAX” position on each of the thermostats (5, 8) indicates the top heat
level. The relevant status indicator (6, 7) is on.
•To switch the hotplates (1, 3) off, twist the relevant thermostat (5, 8) anticlockwise back to the
“MIN” position. The relevant status indicator (6, 7) goes out.
6.2 Setup/First use
•Place the hotplate on a stable, flat, heat-resistant surface.
•Connect the power plug to an easily accessible mains socket.
•In order to remove any production residues, operate the hotplate for approx. 3 minutes at the
maximum temperature with no pan on it before using it for the first time. To do this, twist both
thermostats (5, 8) clockwise to the “MAX” position (maximum heat). Occasionally, smoke can
develop. If this happens, ensure there is sufficient ventilation by opening a window if necessary.

SilverCrest SDK 2500 C1
12 - English
•After approx. 3 minutes, switch both hotplates (1, 3) off by twisting both thermostats (5, 8)
anticlockwise back to the “MIN” position. Allow the hotplates (1, 3) to cool.
•The dual hotplate is now ready for use.
6.3 How the status indicators (6, 7) work
•The status indicators (6, 7) indicate when the relevant hotplates (1, 3) are being heated.
•As soon as the hotplate (1, 3) reaches the selected heating level (1/2/3/4/5/MAX), the
status indicator (6, 7) goes out.
•The status indicator (6, 7) comes back on again as soon as the temperature below the selected
level (1/2/3/4/5/MAX) and the heating is switched back on. So it is possible for the status
indicators (6, 7) to switch on and off several times while you are cooking. This is not a
malfunction.
7. Getting started
7.1 Energy-efficient cooking
•Use pans with the same diameter as the hotplate you are using (1, 3):
Hotplate (1, 3) Diameter
Large hotplate (1) 18.5 cm
Small hotplate (3) 15.5 cm
If pans have a smaller diameter than that of the hotplate you are using (1, 3), energy is lost.
•Use quality pans with a thick base that sit evenly on the hotplate (1, 3). On the one hand, this
allows the heat to be conducted well from the hotplate (1, 3) to the pan, on the other hand, the
heat is retained well in the base.
•Do not use pans with warped or uneven bases.
•A quality pan with a good base stores the heat well, meaning in many cases the hotplate (1, 3)
can be switched off before the end of the cooking time. The residual heat of the hotplate (1, 3)
and pan base is generally enough to finish cooking the dish.
7.2 Usage
•Place the pan and its contents on the selected hotplate (1, 3).
•Switch the hotplate (1, 3) on by twisting the thermostat (5, 8) and select a heat setting between
“1” and “MAX”. The higher the heat setting, the faster and hotter the food is heated.
Heat setting Description
MIN Stop heating
- 4 Slow cooking
4 - MAX Fast cooking
Status Indicator (6, 7) Status
On Hotplate (1, 3) heating or reheating.
Off The set temperature has been reached.
•The relevant status indicator (6, 7) is on during the heating-up phase.

SilverCrest SDK 2500 C1
English - 13
The status indicator (6, 7) may switch on and off when in use. This is not a malfunction, it is
an indication that heating to the hotplate is switched on and off in order to maintain the
selected temperature.
•Once cooking is complete, switch the hotplate (1, 3) off by turning the thermostat (5, 8) to the
“MIN” position.
When the hotplate is to be left unused for a long period of time, unplug the mains plug from the mains
socket.
8. Cleaning
DANGER: Risk of burns
Wait until the hotplate is completely cool before cleaning it. Otherwise you could get
burnt.
DANGER: Risk of electric shock
Remove the mains plug from the socket before cleaning. This could result in an electric
shock.
Do not pour or spray any liquids onto the hotplate and do not immerse it in water or
other liquids. This could cause short circuits which could result in electric shocks or fires.
WARNING about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface
(e.g. metal sponges). Otherwise, the hotplate could get damaged.
•Wipe the hotplate with a damp cloth. Put a mild detergent on the cloth to remove stubborn dirt and
grease.
•Then remove any residual detergent with a damp cloth.
•After cleaning, allow the hotplate to dry completely before using it again.
8.1 Storage when not in use
If the hotplate is not to be used for an extended period, store it in a safe, clean and dry place.
•Allow the hotplate to cool completely before storing.
•Wind the power cable (2) around the cable winder on the bottom of the device, as shown in the
diagram below. You can fit the power cable (2) plug into the holder provided (arrow).
•Store the hotplate in a safe place away from dust.

SilverCrest SDK 2500 C1
14 - English
9. Troubleshooting
If your hotplate does not work as normal, follow the instructions below to try to solve the problem. If
working through the tips below does not fix the fault, please contact our hotline (see "Warranty
information" section).
The dual hotplate is not working.
•The mains plug is not plugged in. Insert the mains plug into a mains socket.
•The mains socket is defective. Test the device in a different mains socket that you are certain is
working.
•The ON/OFF switch (4) is not switched on. Move the ON/OFF switch (4) to the “|” position.
•The hotplate (1, 3) you want is not switched on. Turn the relevant thermostat (5, 8) clockwise to
switch on the hotplate (1, 3) you want. The relevant status indicator (6, 7) is on.
You can download this and many other manuals, product videos and
setup software from www.lidl-service.com.
This QR code takes you directly to the LIDL service website (www.lidl-
service.com), where you can open your operating instructions by
entering the product number (IAN) 378199_2110.

SilverCrest SDK 2500 C1
English - 15
10. Environmental regulations and disposal information
Devices marked with this symbol are subject to the European Directive
2012/19/EU. All electrical and electronic devices must be disposed of separately
from household waste at official disposal centres. Avoid damage to the environment
and risks to your personal health by disposing of the device properly. For further
information about proper disposal, contact your local government, disposal bodies
or the shop where you bought the device.
Dispose of all packaging in an environmentally friendly manner. Cardboard
packaging can be taken to paper recycling centres or public collection points for
recycling. Any film or plastic contained in the packaging should be taken to your
public collection points for disposal.
ES/PT
Only relevant for France:
The product is recyclable, but is subject to more restrictive manufacturer
responsibility terms and must be collected separately.
Please note the markings on the packaging material when disposing of it, it is
labelled with abbreviations (a) and numbers (b), the meanings of which are as
follows:
1–7: plastic / 20–22: paper and cardboard / 80-98: composite materials.
Symbol Material Contained in the following packaging
elements for this product
Polyethylene
terephthalate -----
High density
polyethylene ---
Polyvinyl chloride ---
Low density
polyethylene Internal plastic bag as hotplate packaging

SilverCrest SDK 2500 C1
16 - English
Polypropylene Sticker to seal the packaging
Polystyrene Shaped material to fix the hotplate into the packaging
Other plastics ---
Corrugated cardboard Sales packaging, online outer packaging, master box
Other cardboard ---
Paper Printed instructions
Paper/cardboard/
plastic ---
Paper/cardboard/
plastic/aluminium ---
11. Conformity notes
The product complies with the requirements of the applicable European and national
directives. Evidence of conformity has been provided. The manufacturer has the relevant
declarations and documentation.
The product complies with the requirements of the applicable national directives of the
Republic of Serbia.
The product complies with the requirements of the applicable national directives for
Great Britain.
The complete EU Declaration of Conformity is available for download from this link:
https://www.targa.gmbh/downloads/conformity/378199_2110.pdf

SilverCrest SDK 2500 C1
English - 17
12. Warranty information
Warranty of TARGA GmbH
Dear Customer,
This device is sold with three years warranty from the date of purchase. In the event of product defects,
you have legal rights towards the seller. These statutory rights are not restricted by our warranty as
described below.
Warranty conditions
The warranty period commences upon the date of purchase. Please keep the original receipt in a safe
place as it is required as proof of purchase. If any material or manufacturing faults occur within three
years of purchase of this product, we will repair or replace the product free of charge as we deem
appropriate.
Warranty period and legal warranty rights
The warranty period is not extended in the event of a warranty claim. This also applies to replaced
and repaired parts. Any damage or defects discovered upon purchase must be reported immediately
when the product has been unpacked. Any repairs required after the warranty period will be subject to
charge.
Scope of warranty
The device was carefully manufactured in compliance with stringent quality guidelines and subjected to
thorough testing before it left the works. The warranty applies to material and manufacturing faults. This
warranty does not cover product components which are subject to normal wear and which can
therefore be regarded as wearing parts, or damage to fragile components such as switches,
rechargeable batteries or components made of glass. This warranty is void if the product is damaged,
incorrectly used or serviced. To ensure correct use of the product, always comply fully with all
instructions contained in the user manual. The warnings and recommendations in the user manual
regarding correct and incorrect use and handling of the product must always be observed and
complied with. The product is solely designed for private use and is not suitable for commercial
applications. The warranty is rendered void in the event of incorrect handling and misuse, if it is
subjected to force, and also if any person other than our authorised service technicians interfere with
the device. No new warranty period commences if the product is repaired or replaced.
Submitting warranty claims
To ensure speedy handling of your complaint, please note the following:
-Before using your product for the first time, please read the enclosed documentation
carefully. Should any problems arise which cannot be solved in this way, please call our
hotline.

SilverCrest SDK 2500 C1
18 - English
-Always have your receipt, the product article number as well as the serial number (if
available) to hand as proof of purchase.
-If it is not possible to solve the problem on the phone, our hotline support staff will initiate
further servicing procedures depending on the fault.
Service
Phone: [phone]
E-Mail: [email protected]
Phone: [phone]
E-Mail: [email protected]
Phone: [phone]
E-Mail: [email protected]
Phone: [phone]
E-Mail: [email protected]
IAN: 378199_2110
Manufacturer
Please note that the following address is not a service address. First contact the service point stated
above.
TARGA GmbH
Coesterweg 45
59494 Soest
GERMANY