Silvercrest SNOT 20 A1 User manual

FACIAL HAIR TRIMMER SNOT 20 A1
IAN 303779
FACIAL HAIR TRIMMER
Operation and safety notes
Translation of the original instructions
MULTITRIMMER
Brugs- og sikkerhedsanvisninger
Oversættelse af den originale driftsvejledning
TONDEUSE
MULTIFONCTION
Instructions d‘utilisation et
consignes de sécurité
Traduction de la notice originale
MULTITRIMMER
Bedienings- en veiligheidsinstructies
Vertaling van de oorspronkelijke
gebruiksaanwijzing
MULTITRIMMER
Bedienungs- und Sicherheitshinweise
Originalbetriebsanleitung

FACIAL HAIR TRIMMER SNOT 20 A1
GB/IE/NI Operation and safety notes Page 5
DK Brugs- og sikkerhedsanvisninger Side 26
FR/BE Instructions d‘utilisation et consignes de sécurité Page 47
NL/BE Bedienings- en veiligheidsinstructies Pagina 70
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 93

A
B
1
2
3
4
5
6
2
11
7
8
10
9

C
8
13
9
12
5
D

5GB/IE/NI
List of pictograms used ......................................Page 6
Introduction...............................................................Page 6
Intended use .................................................................Page 7
Parts description............................................................Page 7
Technical data ..............................................................Page 8
Scope of delivery..........................................................Page 8
Safety instructions.................................................Page 9
Safety instructions for batteries/
rechargeable batteries...................................................Page 11
Before first use.........................................................Page 14
Inserting/ replacing the battery...................................Page 14
Attaching/ removing the attachment...........................Page 15
Operation....................................................................Page 16
Switch on/ off...............................................................Page 16
Removing nose and ear hair........................................Page 17
Cutting eyebrows..........................................................Page 17
Shortening or shaping small beards and sideburns...Page 18
Cleaning, care and storage.............................Page 19
Troubleshooting......................................................Page 21
Disposal........................................................................Page 21
Translation of the original
declaration of conformity.................................Page 23
Warranty.....................................................................Page 24

6 GB/IE/NI
List of pictograms used
Direct current Battery polarity
Opened/
closed lock
Facial hair trimmer SNOT 20 A1
Introduction
We congratulate you on the purchase of your new product.
You have chosen a high quality product. The instructions
for use are part of the product. They contain important
information concerning safety, use and disposal. Before
using the product, please familiarise yourself with all of the
safety information and instructions for use. Only use the
product as described and for the specified applications.
If you pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.

7GB/IE/NI
Intended use
This product is solely designed to remove human nose and
ear hairs and also trim the eyebrow, sideburns, moustaches
and small beards. This product is designed for private h ouse-
hold use only. It must not be used in commercial areas. The
manufacturer is not liable to damage caused by improper use.
Parts description
1Blade protector
2Nose and ear hair trimmer attachment
3Trimmer body
4Protective cap (Eyebrow trimmer attachment)
5Eyebrow trimmer attachment
6Base
7Cleaning brush
8Dual comb attachment (3mm/6mm)
9Beard contouring tool
10 Protective cap (Nose and ear hair trimmer attachment)
11 Blade (Nose and ear hair trimmer attachment)
12 Blade (Eyebrow trimmer attachment)
13 Blade (Beard contouring tool)
14 Battery compartment cap
15 Battery

8 GB/IE/NI
Technical data
Battery: 1.5V battery (AA),
(LR6)
Degree of protection: IPX4 (splash-proof)
Emissions Sound pressure level: < 72dB(A), K = 3dB
Scope of delivery
1 Facial hair trimmer
1 Nose and ear hair trimmer attachment
1 Eyebrow trimmer attachment
1 Beard contouring tool
1 Dual comb attachment (3mm/6mm)
1 Base
1 Cleaning brush
1 Battery
1 Instructions for use

9GB/IE/NI
Safety instructions
KEEP ALL THE SAFETY ADVICE AND
INSTRUC TIONS IN A SAFE PLACE FOR
FUTURE REFERENCE!
CAUTION! This product is not a toy
for children! Keep out of the reach of
children. Children are not aware of
the dangers associated with handling
electrical products.
This product can be used by children
aged from 8 years and above and
persons with reduced physical, sen-
sory or mental capabilities or lack of
experience and knowledge if they
have been given supervision or instruc-
tion concerning use of the product
in a safe way and understand the

10 GB/IE/NI
hazards involved. Children shall not
play with the product. Cleaning and
user maintenance shall not be made
by children without supervision.
Do not use the product if you notice
any signs of damage, otherwise you
may get hurt.
Do not expose the product to high
temperatures or moisture, otherwise
the product may be damaged.
Prevent strong impact or stress on
the product to avoid damages!
In the event of damage, repairs or
other problems with the product,
please contact an electrician.
Keep the product
dry. Never immerse this product into
water.

11GB/IE/NI
Safety instructions for
batteries/rechargeable
batteries
DANGER TO LIFE! Keep batteries/
rechargeable batteries out of reach
of children. If accidentally swallowed
seek immediate medical attention.
D ANGER OF EXPLOSIO N!
Never recharge non-recharge-
able batteries. Do not short-circuit bat-
teries/rechargeable batteries and/
or open them. Overheating, fire or
bursting can be the result.
Never throw batteries/rechargeable
batteries into fire or water.
Do not exert mechanical loads to
batteries/rechargeable batteries.

12 GB/IE/NI
Risk of leakage of batteries/
rechargeable batteries
Avoid extreme environmental condi-
tions and temperatures, which could
affect batteries/rechargeable batter-
ies, e.g. radiators/direct sunlight.
If batteries/ rechargeable batteries
have leaked, avoid contact with skin,
eyes and mucous membranes with
the chemicals! Flush immediately the
affected areas with fresh water and
seek medical attention!
WEAR PROTECTIVE
GLOVES! Leaked or damag ed
batteries/rechargeable batteries can
cause burns on contact with the skin.
Wear suitable protective gloves at all
times if such an event occurs.

13GB/IE/NI
In the event of a leakage of batteries/
rechargeable batteries, immediately
remove them from the product to pre-
vent damage.
Only use the same type of batteries/
rechargeable batteries. Do not mix
used and new batteries/rechargeable
batteries.
Remove batteries/ rechargeable bat-
teries if the product will not be used
for a longer period.
Risk of damage of the product
Only use the specified type of bat-
tery/rechargeable battery!
Insert batteries/rechargeable batter-
ies according to polarity marks (+)
and (-) on the battery/rechargeable
battery and the product.

14 GB/IE/NI
Clean the contacts on the battery/
rechargeable battery and in the bat-
tery compartment before inserting!
Remove exhausted batteries/rec harge-
able batteries from the product imme-
diately.
Before first use
Note: Remove all packaging materials from the product.
Inserting/ replacing the battery
(see Fig. E + F)
Hold the trimmer body 3firmly and vertically and
turn the battery compartment cap 14 clockwise until the
vertical mark ( ) on the battery compartment cap 14 is
aligned with the inverted triangle mark ( ) (see Fig. E)
on the bottom of the trimmer body 3.
Then remove the battery compartment cap 14 from
the trimmer body 3.
Remove the used battery 15 , if present.

15GB/IE/NI
Insert a new battery type AA (LR6) in the trimmer
body 3.
Indication: Pay attention to the right polarity. This
is indicated on the bottom of the trimmer body 3.
Put the battery compartment cap 14 back on the
trimmer body 3.
Hold the trimmer body 3firmly and vertically and
turn the battery compartment cap 14 counter-clock-
wise until the vertical mark ( ) on the battery com-
partment cap 14 is aligned with the circle mark ( )
on the bottom of the trimmer body 3. The product is
locked and in the position “OFF”.
Attaching/removing the attachment
(see Fig. G)
Switch off the product. Hold the trimmer body 3
firmly and vertically.
Remove the protective cap (nose and ear hair trimmer
attachment) 10 by pulling it away from the trimmer
body 3, if currently attaching nose and ear hair trimmer
attachment 2.
Turn the attachment 2, 5, 9counter-clockwise to
release and remove.
Turn the attachment 2, 5, 9 clockwise to fasten.

16 GB/IE/NI
Operation
Note: Do not use the product if the blade 11 , 12 , 13 is
deformed or damaged.
Switch on/off
Switch on:
Hold the trimmer body 3firmly and vertically. Turn
the battery compartment cap
14
counter-clockwise until
th
e vertical mark ( ) on the battery compartment cap
14 is aligned with the vertical mark ( ) on the bottom
of the trimmer body 3. The product is locked and in
the position “ON”.
Switch off:
Hold the trimmer body 3firmly and vertically. T urn the
battery compartment cap
14
clockwise until the verti-
cal mark ( )on the battery compartment cap 14 is
aligned with the circle mark ( ) on the bottom of the
trimmer body 3. The product is locked and in the po-
sition “OFF”.

17GB/IE/NI
Removing nose and ear hair
Place the nose and ear hair trimmer attachment 2onto
the product as described in the chapter “Attaching /
removing the attachment”. Switch the product on as de-
scribed in the chapter “Switch on/ off”.
CAUTION! DANGER OF INJURY! Be careful not
to insert the product too deep into nose or ears. Care-
fully insert only the tip of the blade 11 into the front
area of your
nos tril or ear. Remove the nose or ear hair
with small circular movements.
After using switch the product off as described in the
chapter “Switch on/off”.
Cutting eyebrows
Place the eyebrow trimmer attachment 5onto the
product as described in the chapter “Attaching /
removing the attachment”.
Take off the protective cap 4.
To achieve the desired length (3mm/ 6mm), set the
dual comb attachment 8on the blade 12 with the
desired length (see Fig. C). Marking of the length is
marked on the dual comb attachment 8. Ensure that
the dual comb attachment 8fastens audibly and sits
tightly.

18 GB/IE/NI
Note: Desired trim length can only be achieved of the
product is held perpendicularly to the skin’s surface.
Switch the product on as described in the chapter
“Switch on/off”.
Position the product on the area at a right angle and
slowly pull in/ against the direction of hair growth.
Repeat this step until satisfied trim is attained.
After using switch the product off as described in the
chapter “Switch on/off”.
To trim hair just above the skin surface, remove the
dual comb attachment 8and guide the blade 12
directly over the skin in the desired area.
Note: To trim only individual hairs, adjust the angle
of the blade 12 and guide this against the individual
hairs.
Shortening or shaping small beards
and sideburns
Place the beard contouring tool 9onto the product
as described in the chapter “Attaching/ removing the
attachment”.
Switch the product on as described in the chapter
“Switch on/off”.

19GB/IE/NI
Position the product on the area at a right angle and
slowly pull in/ against the direction of hair growth.
Repeat this step until satisfied trim is attained.
After using switch the product off as described in the
chapter “Switch on/off”.
Cleaning, care and storage
Note: Always switch off the product before cleaning it.
Do not use any corrosive or abrasive cleaning agents.
These might damage the surface of the product.
For trimmer body 3:For nose and ear
hair trimmer
attachment 2:
Remove any attachment
2, 5, 9. Then, clean
with a dry cloth.
Remove the nose and ear
hair trimmer attachment 2
(see Fig. G). Clean the
nose and ear hair trimmer
attachment 2carefully
under running water. Then
fully dry the nose and ear
hair trimmer attachment 2
before using the product.

20 GB/IE/NI
For eyebrow trimmer
attachment 5:
For beard contouring
tool 9:
Take off the dual comb
attachment 8, if present.
Clean the blade 12 care-
fully under running water.
Then fully dry the blade 12
before using the product.
Clean the blade 13 care-
fully under running water.
Then fully dry the blade 13
before using the product.
For base 6:For protective cap
4, 10 :
Clean with a dry cloth. Clean the protective cap
4, 10 carefully under
running water. Then fully
dry the protective cap 4,
10 before putting on the
product.
A
ttention: The product is only protected against spl ash
water. Never immerse it in water. Otherwise, irrepara ble
damage may result.
If there are still hairs in the blade 11 ,12 ,13 , clean it
with the cleaning brush 7.
To store the product, always put the product and all
accessories on the base 6(see Fig. A).
Keep the product in a cool, dry location.