Silvercrest SV 125 A1 User manual

HOYER Handel GmbH Tasköprüstraße 3 DE-22761 Hamburg DEUTSCHLAND Status of information · Stanje informacija · Verzija informacija · Data reviziei Ⱦɚɬɚɧɚɢɧɮɨɪɦɚɰɢɹɬɚ · Stand der Informationen:
VACUUM SEALER SV 125 A1
IAN 310996 IAN 310996
12/2018 ID: SV 125 A1_18_V1.5 VAKUUMIERER
Bedienungsanleitung
DE
CH
RO
BG
DE
GB
HR
RS
ɆȺɒɂɇȺɁȺȼȺɄɍɍɆɂɊȺɇȿ Ɋɴɤɨɜɨɞɫɬɜɨɡɚɟɤɫɩɥɨɚɬɚɰɢɹ
BG
UREíAJ ZA VAKUUMIRANJE Upute za korištenje
HR
VACUUM SEALER Operating instructions
GB
APARAT DE VIDAT Instrucķiuni de utilizare
RO
RS RO BG
UREíAJ ZA VAKUUMIRANJE Uputstvo za upotrebu
RS

English..................................................................................... 2
Hrvatski ................................................................................ 16
Srpski.................................................................................... 32
Românà................................................................................. 48
ǯȨșȑȎȞȟȘȖ ........................................................................... 64
Deutsch ................................................................................. 82

13
7
2
B
4
21
8
9
13
11
15
12
10
14
5
5
A
16
6
17
18 19 20
ABC
Overview / Pregled / Pregled / Privire de ansamblu / ǽȞȓȑșȓȒ /
Übersicht

2 GB
Contents
1. Overview ........................................................................................ 3
2. Intended purpose ............................................................................ 4
3. Safety information ........................................................................... 4
4. Items supplied ................................................................................. 7
5. Power supply .................................................................................. 7
6. Advantages of vacuum-packed food ................................................ 7
6.1 Durability............................................................................................. 7
6.2 Sous-Vide - gentle cooking method in a vacuum bag ................................. 7
7. Preparation ..................................................................................... 8
7.1 Setting up the device............................................................................. 8
7.2 Requirements on the film/bags ............................................................... 8
7.3 Producing a bag................................................................................... 8
8. Use .................................................................................................. 8
8.1 Overview of the functions....................................................................... 8
8.2 Vacuum-packing vacuum containers and bags (with valve)......................... 9
8.3 Filling bags (without valves).................................................................. 10
8.4 Sealing bags (without valves) ............................................................... 10
8.5 Vacuum-packing and sealing bags (without valves) ................................. 10
9. Cleaning and storage ..................................................................... 11
9.1 Cleaning............................................................................................ 11
9.2 Storage ............................................................................................. 12
10.Disposal ........................................................................................ 12
11.Trouble-shooting ............................................................................ 12
12.Ordering film bags and accessories ............................................... 13
13.Technical specifications .................................................................. 14
14.Warranty of the HOYER Handel GmbH ........................................... 14

3
GB
1. Overview
1Button and LED for the vacuum function (for containers and bags with the valve
above the connection|6)
2Button and LED for the seal film function (no vacuum)
3Button and LED for the vacuum + seal film function
4Power cable with mains plug
5Opening for the power cable on the underside of the device
6Connection for vacuum tubes|17
7Button for opening the lid (left and right)
8Sealing strip
9Upper sealing ring
10 Lid
11 Rear reference ridge
12 Suction nozzle (for the vacuum + seal film function)
13 Side reference ridge
14 Lower sealing ring
15 Welding wire
16 Collector for liquids (removable)
Figure A:
17 Vacuum tubes (60 cm)
18 Adapter A(e.g. for Ernesto containers* and FoodSaver lunchboxes**)
19 Adapter B(e.g. for FoodSaver freshness containers**)
20 Adapter C(e.g. for CASO containers** and FoodSaver storage boxes**)
* not included in items supplied
** Containers from other manufacturers - not included in items supplied.
CASO is a registered brand of Caso Holding GmbH
FoodSaver is a registered brand of Sunbeam Products, Inc.
Figure B:
21 Cable spool at the underside of the device

4 GB
Thank you for your trust!
Congratulations on your new vacuum sealer.
For safe handling of the product and in or-
der to get to know the entire range of fea-
tures:
• Read these user instructions
through thoroughly prior to ini-
tial use.
• Above all, observe the safety in-
formation!
• The device should only be used
as described in these user in-
structions.
• Keep these user instructions for
information purposes.
• If you pass the device on to
someone else, please include
this copy of the user instructions.
The user instructions are a com-
ponent of the product.
We hope you enjoy your new vacuum seal-
er!
Symbols on your device
The food-safe material of devices
with this symbol will not change the
taste or smell of food.
2. Intended purpose
Use the device exclusively for bag sealing
and/or vacuum-packing food.
The device is designed for private home use
and must not be used for commercial pur-
poses.
The device must only be used indoors.
Foreseeable misuse
WARNING! Risk of material dam-
age!
~
Only use special plastic film bags that are
suitable for use with vacuum sealers / bag
sealers. Comply with the notes on the
packaging of the plastic film bags.
3. Safety information
Warnings
If necessary, the following warnings are used
in this copy of the user instructions:
DANGER! High risk: failure to ob-
serve this warning may result in inju-
ry to life and limb.
WARNING! Moderate risk: failure to ob-
serve this warning may result in injury or se-
rious material damage.
CAUTION: low risk: failure to observe this
warning may result in minor injury or mate-
rial damage.
NOTE: circumstances and specifics that
must be observed when handling the de-
vice.

5
GB
Instructions for safe operation
~ This device can be used by children from the age of 8 and people
with restricted physical, sensory or intellectual abilities or people
without adequate experience and/or understanding, if they are su-
pervised or instructed on how to use this device safely and if they
are aware of the resulting dangers. Children must not play with the
device. Cleaning and user maintenance must not be performed by
children without supervision.
~ Never leave the device unattended while it is plugged in.
~ If the mains power cable of this device should become damaged, it
must be replaced by the manufacturer, the manufacturer's customer
service department or a similarly qualified specialist, in order to
avoid any hazards.
~This device is not intended to be operated using an external tim-
er or a separate remote control system.
DANGER for children
~Packing materials are not children's
toys. Children should not be allowed to
play with the plastic bags. There is a
risk of suffocation.
DANGER to or from pets and
livestock
~Electrical devices can also represent a
hazard to pets and livestock. In addi-
tion, animals can also cause damage to
the device. For this reason you should
keep animals away from electrical de-
vices at all times.
DANGER! Risk of electric
shock due to moisture
~Protect the device from moisture, water
drops and water splashes.
~The device, the power cable and the
mains plug must not be immersed in
water or any other liquids.
~If liquid gets into the device, remove the
mains plug immediately. Have the de-
vice checked before reusing.
~If the device has fallen into water, pull
out the mains plug immediately, and
only then remove the device from the
water. Do not use the device again,
and have it checked by a specialist
workshop.
~Never touch the device with wet hands.
DANGER! Risk of electric
shock
~
Do not use the device if the device or the
power cable has any visible damage, or if
the device has previously been dropped.
~ Lay the power cable such that no one can
step on it, get caught on it, or trip over it.
~Only connect the mains plug to a prop-
erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must still be easily ac-
cessible after connection.
~Ensure that the power cable cannot be
damaged by sharp edges or hot spots.
Do not wrap the power cable around
the device (Danger! Risk of cable dam-
age!). Use the cable spool on the under-
side of the device.
~Let the device cool down completely be-
fore winding up the power cable.

6 GB
~Ensure that the power cable cannot be
trapped or crushed.
~To pull the mains plug out of the wall
socket, always pull on the mains plug,
and never on the power cable.
~Disconnect the mains plug from the wall
socket …
…after every use,
…if there is a fault,
…when you are not using the device,
…before you clean the device and
…during thunderstorms.
DANGER - Fire hazard
~Never leave the device unattended
while it is plugged in.
~Use the device on a stable, level and
heat-resistant surface.
~Never cover the device when connect-
ed due to possible overheating and fire
hazard!
~Do not use the device in the vicinity of
flammable materials or flammable gas-
es.
DANGER! Risk of injury
through burning
~The welding wire becomes very hot dur-
ing operation. Do not touch the hot
welding wire.
~Allow the device to cool down com-
pletely before you clean it or put it
away.
DANGER! Risk of injury
~Ensure that you never vacuum your skin,
hair or clothing with the adapters.
DANGER caused by
insufficient hygiene
~For a carefree enjoyment of your vacu-
um-sealed food, you should always
comply with the following hygiene tips:
- During the preparation and packag-
ing of the food make sure that the en-
tire equipment is perfectly clean.
- Clean the vacuum sealer and all de-
vices thoroughly after use.
- Perishable food should be cooled or
frozen immediately after sealing.
- After thawing or heating perishable
food, this must be consumed immedi-
ately.
WARNING! Risk of material damage
~After the sealing and/or vacuuming
process, the device needs to cool down
for at least 80 seconds.
~Only use special plastic film bags that
are suitable for use with vacuum sealers
/ bag sealers.
~Never place the device on hot surfaces
(e.g. hot plates) or near to heat sources
or open fire.
~Ensure that no liquid is sucked in during
the extraction of air.
~The device is fitted with non-slip silicon
feet. Because furniture can be coated
with a wide variety of varnishes and
plastics, and treated with various care
products, the possibility cannot be ex-
cluded that some of these substances
have components that may attack and
soften the silicon feet. If necessary,
place a non-slip mat under the device.
~Do not use any sharp or abrasive clean-
ing agents.

7
GB
4. Items supplied
1 vacuum sealer
1 spare sealing ring for the lower sealing
ring|14
1 roll of vacuum bagging tube
2 vacuum tubes (60 cm)|17
1 adapter A(e.g. for Ernesto containers and
FoodSaver Lunchboxes)|18
1 adapter B(e.g. for FoodSaver freshness
containers)|19
1 adapter C(e.g. for CASO containers and
FoodSaver storage boxes)|20
1 collector for liquids|16 (inserted)
1 copy of the user instructions
Before using for the first time
• Remove all packing materials.
• Check that the device is undamaged.
5. Power supply
Only connect the mains plug|4to a properly
installed and easily accessible wall socket
whose voltage corresponds to the specifica-
tions on the rating plate. The wall socket
must still be easily accessible after connec-
tion.
1. Unwind the required length of power
cable|4from the cable spool|21.
2. Lead the power cable|4through the
opening|5on the underside of the de-
vice.
3. Connect the mains plug|4with the wall
socket.
6. Advantages of
vacuum-packed food
6.1 Durability
Vacuum-packed food keeps fresh for a sig-
nificantly longer period. This is due to the
fact that during the vacuum-packing process
the oxygen is removed from the food pack-
age.
Furthermore, high-quality film bags and the
vacuum packing protect well against freezer
burn.
6.2 Sous-Vide - gentle
cooking method in a
vacuum bag
The dream of every hobby cook:a steak that
is pink and juicy on the inside, crispy on the
outside. But unfortunately it does not always
work using conventional methods, or it re-
quires exact timing. Sous-Vide makes cook-
ing easier, and almost always yields perfect
results.
In principle, Sous-Vide is nothing more than
the slow cooking of vacuum-sealed food.
On the one hand, Sous-Vide is a very simple
method for achieving excellent results when
preparing food. On the other hand, Sous-
Vide is a clear rejection of the “always-in-a-
rush” attitude of our age.
Professional cooks have been using this
method for many years. With the new Sous-
Vide devices, this cooking method is now
also affordable for hobby cooks at home.

8 GB
7. Preparation
7.1 Setting up the device
Place the device on a dry, level and heat-re-
sistant surface.
7.2 Requirements on the
film/bags
- You can use tubular film or complete
bags.
- The film bag must not be wider than
30|cm.
- The film bag must have dots/knobs or
grooves on one side. Smooth film bags
are not suited for sealing.
- The thickness should be between 0.17
and 0.29 mm (170 - 290 m).
- When buying the film bag, check the
temperature range it is suited for. The
ideal range is between -20 °C and
+110 °C. Such film bags can be deep-
frozen or boiled. The film supplied is
suitable for this application.
- You will find those data on the package
of the film or bag.
7.3 Producing a bag
If you use finished bags, these steps do not
apply.
1. Unwind the length of vacuum bagging
tube from the roll that you require for
your bag. Regarding the length of the
bag, remember that a space of approx.
6 cm towards the top should be left af-
ter filling.
2. Use scissors to cut the piece of vacuum
bagging tube as straight as possible.
3. Seal one end of the bag (see “Sealing
bags (without valves)” on page 10).
8. Use
8.1 Overview of the
functions
All functions stop automatically when the
process is complete.
Pressing the function button again can cancel the
process sooner.
WARNING! Risk of material dam-
age!
~After the sealing and/or vacuuming
process, the device needs to cool down
for at least 80 seconds.
Button Function
|1
Start/cancel vacuum-pack-
ing using the connection|6
with a vacuum tube|17 and
an adapter|18/19/20
|2Start/cancel sealing (with-
out vacuum)
|3Start/cancel vacuum-pack-
ing and sealing the film bag

9
GB
8.2 Vacuum-packing
vacuum containers and
bags (with valve)
This function allows you to vacuum-pack
vacuum containers and bags with valves
from various different manufacturers. For the
different valves, the following adapters are
included in the items supplied:
DANGER! Risk of electric
shock due to moisture!
~Ensure that no liquid is sucked in during
the extraction of air. If this nevertheless
occurs, immediately interrupt the pro-
cess by pressing the active function but-
ton|1again.
~Please comply with the manufacturers’
instructions regarding the filling levels
for containers and bags.
NOTE: the vacuum containers and bags are
not included in the items supplied.
Vacuum containers
1. Fill the vacuum container to the maxi-
mum filling level and close the contain-
er lid.
2. Press one end of the vacuum tube|17
into the connection|6on the right of the
device.
3. Fit the adapter|18/19/20 suitable for
the valve onto the other end of the vacu-
um tube|17.
4. Press the adapter A|18 or B|19 onto
the valve of the vacuum container. Hold
the adapter firmly in place.
Or:
Insert adapter C|20 into the valve of
the vacuum container.
5. Press the button |1.The LED
lights up. The vacuum-packing process
starts.
6. After the vacuum-packing process, the
LED goes out and the vacuum-packing
process is complete.
7. Remove the vacuum tube|17 and the
adapter|18/19/20 from the vacuum
container and repeat the process if nec-
essary with another container.
8. After you have finished vacuum-pack-
ing, remove the vacuum tube|17 from
the connection|6.
Vacuum bags with valves
1. Place the prepared food into the vacu-
um bag. Ensure that there is no food un-
der the valve.
2. Carefully close the vacuum bag.
Adapter e.g. suitable for
Adapter A|18 Ernesto, FoodSaver
Lunchboxes
Adapter B|19 FoodSaver fresh-
ness containers
Adapter C|20 CASO, FoodSaver
storage boxes
6
17
19
6
17
20

10 GB
3. Place the vacuum bag flat on a level
surface with the valve pointing up-
wards.
4. Proceed as for vacuum containers, start-
ing at step 2 (see “Vacuum containers”
on page 9).
8.3 Filling bags (without
valves)
CAUTION:
~No food or liquids must be present at
the top edge, where you want to seal
the bag. That area must be clean and
dry. Otherwise, it is impossible to pro-
duce a proper welding seam.
• Fill the bag only up to a level of 6 cm
below the top edge.
8.4 Sealing bags (without
valves)
1. Smooth the bag where it is to be
sealed.
2. Open the lid|10. If necessary, press the
buttons|7first.
3. Place the bag in the device. For this pur-
pose, the end of the film bag must be
positioned just before the rear reference
ridges|11 and the side reference ridg-
es|13.
4. Ensure again that there are no creases
in the film bag - especially in the area
above the welding wire|15.
5. Close the lid|10.
6. Use both hands to press firmly on the
edges of the lid|10. They must audibly
click into place.
7. Press the button |2. The LED lights
up. The film bag is being sealed.
After approx. 5 - 7 seconds, the LED
goes out and the sealing process is com-
pleted.
8. Simultaneously, press buttons|7inorder
to release the lock of the lid|10.
9. Open the lid|10 and remove the bag.
10.Check the welding seam. It should be a
smooth creaseless seam.
8.5 Vacuum-packing and
sealing bags (without
valves)
DANGER! Risk of electric
shock due to moisture!
~For vacuum-packing, no liquids must be
inside the bag.
~Ensure that no liquid is sucked in during
the extraction of air. If this nevertheless
occurs, immediately interrupt the pro-
cess by pressing the active function but-
ton|3again.
NOTE: when vacuum-packing film bags,
there must not be any vacuum tube|17
plugged into the connection|6.
1. Smooth the bag where it is to be
sealed.
2. Open the lid|10.
3. Place the bag in the device. For this pur-
pose, the end of the film bag must be

11
GB
positioned just before the rear reference
ridges|11 and the side reference ridg-
es|13.
4. Ensure again that there are no creases
in the film bag - especially in the area
above the welding wire|15.
5. Close the lid|10.
6. Use both hands to press firmly on the
edges of the lid|10. They must audibly
click into place.
7. Press the button |3. The LED lights
up. The film bag is first vacuum-packed
and then sealed.
The LED goes out when the process is
complete.
NOTE: if the LED|3does not go out and the
noise of the vacuum pump does not stop, de-
spite the fact that no further air is being
sucked out of the film bag, cancel the pro-
cess. Check that the film bag is in the correct
position in the device, and check for leaks.
8. Simultaneously, press buttons|7in order
to release the lock of the lid|10.
9. Open the lid|10 and remove the bag.
10.Check the welding seam. It should be a
smooth creaseless seam.
9. Cleaning and storage
DANGER! Risk of injury
through burning/scalding!
~Allow the device to cool down com-
pletely before you clean it or put it
away.
~The welding wire|15 becomes very hot
during operation. Do not touch the hot
welding wire|15.
DANGER! Risk of electric
shock!
~Prior to cleaning, disconnect the mains
plug|4of the device.
DANGER! Risk of electric
shock due to moisture!
~The device and the power cable with
mains plug|4must not be immersed in
water or other liquids.
WARNING! Risk of material dam-
age!
~Do not use any sharp or abrasive clean-
ing agents.
9.1 Cleaning
In order to ensure the proper function and
the full capacity of your device, clean it reg-
ularly.
• Wipe down the housing of the device
with a damp cloth.
• Prior to the next use, the device must be
completely dry.
Collector
1. Grasp the centre or both outer ridges
with your fingers and carefully lift the
collector for liquids|16 out upwards.
2. Drain the liquid.
3. Rinse the collector|16 under warm dish-
water or place it in the dishwasher.
Make sure it is dry before inserting it.

12 GB
4. Insert the collector|16 into the device
from above.
Sealing ring
1. Grasp the sealing ring|14 with two fin-
gers and lift it off upwards.
2. Rinse the sealing ring|14 under warm
dishwater. Make sure it is dry before in-
serting it.
3. Replace the sealing ring|14 in the re-
spective form inside the device. Ensure
that it lies in smooth contact and is not
wavy.
NOTE: the sealing ring|14 is a wearing
part. Due to the high contact pressure, it will
lose its shape over time. In this case, replace
it with a new one (included in the items sup-
plied).
9.2 Storage
WARNING! Risk of material damage!
~During storage, the lid|10 must not be
locked, but only loosely closed. Perma-
nent locking could damage seals|9
and|14.
•Figure B: wind the power cable|4
around the cable spool|21 at the un-
derside of the device.
• Store the device so that it is protected
against dust and dirt and out of the
reach of children.
10. Disposal
This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
11. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
~Do not attempt to repair the device
yourself under any circumstances.
Fault Possible causes /
Action
No function • Has the device been connected to the power
supply?
Seams are
not tight
• Ensure that the film bag
is positioned smoothly
between the sealing
strip|8and the welding
wire|15.
• The film was damp or
contaminated at the
seam.

13
GB
12. Ordering film bags
and accessories
Film bag rolls
For the aroma-tight, airtight and watertight
preservation of food.
Suitable e.g. for the SilverCrest vacuum seal-
erSV125A1and theSilverCrestbagsealer
SFS|110 A1/B1/B2/C2.
These film bags are suitable for gentle Sous-
Vide cooking.
Additional accessories
On our website you can find information re-
garding the accessories that can be reor-
dered.
Ordering online
shop.hoyerhandel.com
1. Scan the QR code with your smart-
phone/tablet.
2. With the QR code you will access a
website where you can submit your re-
order.
3 film bag rolls
Width: 20 cm / Length: each 3 m
2 film bag rolls
Width: 28 cm / Length: each 3 m

14 GB
13. Technical
specifications
Symbols used
Subject to technical modifications.
14. Warranty of the
HOYER Handel GmbH
Dear Customer,
your device is provided with a 3 year war-
ranty starting with the purchase date. In the
event of product defects, you are entitled to
statutory rights against the vendor. These
statutory rights are not restricted by our war-
ranty presented in the following.
Warranty conditions
The warranty period starts with the purchase
date. Please keep the original purchase re-
ceipt in a safe place. This document is re-
quired to verify the purchase.
If within three years from the purchase date
of this product a material or factory defect
occurs, the product will be repaired or re-
placed by us – at our discretion – free of
charge to you. This warranty implies that
within the period of three years the defective
device and the purchase receipt are present-
ed, including a brief written description of
the defect and the time it occurred.
If the defect is covered by our warranty, the
repaired or a new product will be returned
to you. No new warranty period starts with
a repair or replacement of the product.
Warranty period and statutory
claims for defects
The warranty period is not extended when
the warranty has been claimed. This also ap-
plies to replaced and repaired parts. Any
damages and defects already existing at the
time of purchase must be reported immedi-
ately upon unpacking. Repairs arising after
the expiration of the warranty period are
subject to a charge.
Warranty coverage
Thedevicewasproducedcarefullyaccording
to strict quality guidelines and tested diligent-
ly prior to delivery.
The warranty applies to material or factory
defects.
Model: SV 125 A1
Mains voltage: 220 - 240 V ~ 50-60 Hz
Protection
class: II
Power rating: 125 W
Pause time: at least 80 seconds after
each use
Certified Safety. Devices must
comply with the generally ac-
knowledged rules of technology
and the German Product Safety
Act (Produktsicherheitsgesetz -
ProdSG).
With the CE marking,
HOYER|Handel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials: cardboard
(except corrugated cardboard)

15
GB
Excluded from the warranty are
wear parts subject to normal wear
and damages to fragile parts, e.g.
switches, batteries, lamps or other
parts manufactured from glass.
This warranty expires if the product is dam-
aged, not used as intended or not serviced.
For the proper operation of the product, all in-
structions listed in the operating instructions
must be observed carefully. Any form of use
and handling that is advised against in the
operating instructions or warned against
must always be avoided.
The product is only intended for private and
not for commercial use. In the case of incor-
rect and improper treatment, use of force and
interventions not performed by our author-
isedServiceCentre,thewarrantyshallcease.
Handling in case of a warranty
claim
In order to ensure prompt processing ofyour
matter, please observe the following notes:
• Please keep the article number
IAN: 310996 and the purchase receipt
as a purchase verification for all inquiries.
• The article number can be found on the
rating plate, an engraving, the title
page of your instructions (in the bottom
left), or as a label on the rear or under-
side of the device.
• If faulty operation or other defects occur,
first contact the Service Centre listed in
the following by telephone or email.
• Then, you are able to send a product re-
ported as defective free of charge to the
service address specified to you, includ-
ing the purchase receipt and the infor-
mation on the defect and when it
occurred.
Pleasevisit www.lidl-service.comto
download this and many other
manuals, product videos and soft-
ware.
Service Centre
Service Great Britain
Tel.: [phone] (£ 0.10/Min.)
E-Mail: [email protected]
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
Service Malta
Tel.: [phone]
E-Mail: [email protected]
Service Cyprus
Tel.: [phone]
E-Mail: [email protected]
IAN: 310996
Supplier
Please note that the following address is no
service address. First contact the afore-
mentioned Service Centre.
HOYER Handel GmbH
Tasköprüstraße 3
DE-22761 Hamburg
GERMANY
GB
IE
MT
CY

16 HR
Sadržaj
1. Pregled .......................................................................................... 17
2. Predviîena uporaba ...................................................................... 18
3. Sigurnosne napomene ................................................................... 18
4. Opseg isporuke ............................................................................. 20
5. Napajanje elektriênom energijom .................................................. 21
6. Prednosti vakuumiranih namirnica ................................................ 21
6.1 Dulji rok trajanja................................................................................. 21
6.2 Sous-vide – nježno kuhanje u vakuumskoj vreäici.................................... 21
7. Priprema ....................................................................................... 21
7.1 Postavljanje ureîaja............................................................................ 21
7.2 Zahtjevi za foliju/vreäicu..................................................................... 22
7.3 Izrada vreäice .................................................................................... 22
8. Uporaba ........................................................................................ 22
8.1 Pregled funkcija.................................................................................. 22
8.2 Vakuumiranje vakuumskih posuda i vreäica (s ventilom)........................... 23
8.3 Punjenje vreäice (bez ventila) ............................................................... 24
8.4 Zavarivanje vreäice (bez ventila)........................................................... 24
8.5 Vakuumiranje i zavarivanje vreäice (bez ventila)..................................... 25
9. éišäenje i pohranjivanje ................................................................. 26
9.1 éišäenje ............................................................................................ 26
9.2 Pohranjivanje ..................................................................................... 26
10.Uklanjanje otpada ......................................................................... 26
11.Rješavanje problema ..................................................................... 27
12.Naruêivanje folija i pribora ............................................................ 27
13.Tehniêki podaci .............................................................................. 28
14.Jamstvo tvrtke HOYER Handel GmbH ............................................ 29

17
HR
1. Pregled
1Tipka i LED lampica za funkciju vakuumiranja (za posude i vreäice s ventilom
putem prikljuêka|6)
2Tipka i LED lampica za funkciju zavarivanja folije (bez vakuuma)
3Tipka i LED lampica za funkciju vakuumiranja i zavarivanja folije
4Prikljuêni kabel s mrežnim utikaêem
5Otvor za prikljuêni kabel na donjoj strani ureîaja
6Prikljuêak za vakuumska crijeva|17
7Tipke za otvaranje poklopca (lijevo i desno)
8Traka za brtvljenje
9Gornji brtveni prsten
10 Poklopac
11 Stražnji graniênici
12 Usisna mlaznica (za funkciju vakuumiranja i zavarivanja folije)
13 Boêni graniênici
14 Donji brtveni prsten
15 Žica za zavarivanje
16 Pladanj za sakupljanje tekuäine (odvojiv)
Slika A:
17 Vakuumska crijeva (60 cm)
18 Adapter A(npr. za posude Ernesto* i kutije za užinu FoodSaver**)
19 Adapter B(npr. za posude za zadržavanje svježine FoodSaver**)
20 Adapter C(npr. za posude CASO** i posude za êuvanje hrane FoodSaver**)
* Nije u opsegu isporuke
** Posude drugih proizvoîaêa – nije u opsegu isporuke
CASO je registrirana robna marka društva Caso Holding GmbH
Foodsaver je registrirana robna marka društva Sunbeam Products, Inc.
Slika B:
21 Mjesto za namatanje kabela na donjoj strani ureîaja

18 HR
Zahvaljujemo vam na
povjerenju!
éestitamo vam na kupnji novog aparata za
vakuumiranje.
Kako biste osigurali sigurno korištenje proi-
zvoda te se upoznali sa svim njegovim rad-
nim znaêajkama:
• Prije prve uporabe pažljivo pro-
êitajte ove upute za korištenje.
• Prije svega pridržavajte se si-
gurnosnih napomena!
•Ureîaj se smije upotrebljavati
samo kako je opisano u ovim
uputama za korištenje.
•Saêuvajte ove upute za korište-
nje za informiranje u buduäno-
sti.
•Akoureîaj namjeravate dati u
treäe ruke, priložite i ove upute
za korištenje. Upute za korište-
nje sastavni su dio proizvoda.
Sigurni smo da äete uživati u radu vašim no-
vim aparatom za vakuumiranje!
Simboli na ureîaju
Ovajsimboloznaêavadamaterijali
s tom oznakom ne mijenjaju ni okus
ni miris namirnica.
2. Predviîena uporaba
Ureîaj rabite iskljuêivo za zavarivanje i/ili
za vakuumiranje namirnica.
Ureîaj je predviîen za uporabu u privat-
nom kuäanstvu i ne smije se upotrebljavati u
komercijalne svrhe.
Ureîaj se smije rabiti samo u unutrašnjim
prostorijama.
Moguäa pogrešna upotreba
UPOZORENJE na materijalnu štetu!
~Upotrebljavajte samo specijalne plastiê-
ne folije prikladne za uporabu u apara-
tima za vakuumiranje / ureîajima za
zavarivanje folije. Obratite pozornost
na napomene na ambalaži plastiênih
folija.
3. Sigurnosne napomene
Oznake upozorenja
Po potrebi äe se u ovim uputama za korište-
nje primijeniti sljedeäe oznake upozorenja:
OPASNOST! Visoki rizik: Nepošti-
vanje upozorenja može biti opasno
po zdravlje i život.
UPOZORENJE! Srednji rizik: Nepoštiva-
nje upozorenja može uzrokovati ozljede ili
veliku materijalnu štetu.
OPREZ: Niski rizik: Nepoštivanje upozore-
nja može uzrokovati lakše ozljede ili materi-
jalnu štetu.
NAPOMENA: stanja i posebnosti kojih se
prilikom korištenja ureîaja potrebno pridr-
žavati.