Silvercrest SHTT 2200 A1 User manual

IAN 271170
IONIC HAIRDRYER
Operating instructions
ION-HÅRTØRRER
Betjeningsvejledning
HÅRTORK MED
JONISERINGSFUNKTION
Bruksanvisning
IONISOIVA HIUSTENKUIVAIN
Käyttöohje
IONEN-HAARTROCKNER
Bedienungsanleitung
IONIC HAIRDRYER SHTT 2200 A1

GB/IE Operating instructions Page 1
FI Käyttöohje Sivu 13
SE Bruksanvisning Sidan 25
DK Betjeningsvejledning Side 37
DE/AT/CH Bedienungsanleitung Seite 49
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen kaikkiin toimintoihin.
Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant med
apparatens/maskinens funktioner.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

B
A
5
7
6
1
8
9
2
4
3

1
SHTT 2200 A1
GB
IE
Contents
Introduction...................................................2
Copyright.....................................................2
Intended use ..................................................2
Package contents and transport inspection .........................2
Disposal of packaging materials ............................................. 3
Description of the appliance .....................................3
Technical data .................................................3
Safety instructions .............................................4
Preparation ...................................................6
Operation ....................................................6
Heating and blower levels.................................................. 6
Cold air level ............................................................ 7
Ionisation function ........................................................ 7
Drying and styling hair .........................................8
Cleaning......................................................9
Cleaning the housing...................................................... 9
Cleaning the air intake grille ................................................ 9
Storage .....................................................10
Troubleshooting ..............................................10
Disposal of the appliance.......................................10
Warranty....................................................10
Service ......................................................11
Importer.....................................................11

2SHTT 2200 A1
GB
IE
Introduction
Congratulations on the purchase of your new appliance.
You have selected a high-quality product. The operating instructions are part of
this product. They contain important information on safety, usage and disposal.
Before using the product, familiarise yourself with all operating and safety instructions.
Use the product only as described and for the specified areas of application. Please
also pass on these operating instructions to any future owner.
Copyright
This documentation is protected by copyright.
Any copying or reproduction, including in the form of extracts, or any reproduction
of images (even in a modified state), is permitted only with the written authorisa-
tion of the manufacturer.
Intended use
This hairdryer is intended only for the drying and styling of human hair, under no
circumstances is it to be used for wigs and hairpieces made of synthetic material.
This hairdryer is intended for domestic use only. Pay heed to all of the information
in this operating manual, especially the safety instructions. This appliance is not
designed for use in commercial or industrial applications.
The appliance is not intended for any other purpose, nor for use beyond the
scope described. No claims of any kind will be accepted for damage arising
as a result of incorrect use. The risk shall be borne solely by the user.
Package contents and transport inspection
The appliance is supplied with the following components as standard:
▯ Ionic Hairdryer
▯ Styling jet
▯ Finger diffusor
▯ Operating instructions
NOTE
► Check the package for completeness and for signs of visible damage.
► If any items are missing or damaged as a result of defective packaging
or transportation, contact the Service Hotline (see chapter "Service").

3
SHTT 2200 A1
GB
IE
Disposal of packaging materials
The packaging protects the appliance from damage during transport. The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the original packaging during the warranty period so that
the device can be properly packed for returning in the event of a warranty
claim.
Description of the appliance
Figure A:
Styling jet
Air intake grille
Sensor field
Hanger eye
Control lamp
Blower level switch (2 levels)
Heater level switch (3 levels)
 Cold air button G(Cool-Shot)
Figure B:
Finger diffuser
Technical data
Mains voltage 220–240 V ~, 50/60 Hz
Rated power 1900 - 2300 W
Protection class II

4SHTT 2200 A1
GB
IE
Safety instructions
RISK OF ELECTRIC SHOCK
► Connect the hairdryer only to a correctly installed mains power
socket providing electrical current at the level detailed on the
rating plate.
► Under no circumstances may the hairdryer be submerged in liquids,
or liquids be permitted to enter the appliance housing. Do not
expose the appliance to humidity and do not use it outdoors.
If liquid gets into the housing, disconnect the appliance from the
mains power socket immediately and have it repaired by a quali-
fied technician.
► Unplug the hairdryer from the power socket if defective operation
is apparent and before cleaning it.
► To disconnect the appliance, pull only on the plug itself, not on
the power cable.
► Do not wrap the power cable around the appliance and protect
the cable from being damaged.
► To avoid potential risks, damaged mains cables should be
replaced by the manufacturer or the manufacturer’s customer
service department or a similarly qualified person.
► Do not kink or crush the power cable and route it in such a way
as to prevent people from stepping on or tripping over it.
► Do not use extension cables.
► Never touch the hairdryer, the power cable or the plug with wet
hands.
► Disconnect the hairdryer from the power source immediately after
use. The appliance is completely free of electrical power only
when you unplug it.
► You must not open or repair the housing of the hairdryer. Doing
so can lead to risks and also invalidates the warranty. Arrange
for the hairdryer to be serviced and repaired only by qualified
specialists.

5
SHTT 2200 A1
GB
IE
RISK OF ELECTRIC SHOCK
Never use the appliance near water, and keep it away from
sinks, baths and other similar containers. Water in the proximity of
the appliance is hazardous, even if the appliance is switched
off. Always disconnect the plug from the mains power socket
after use. As additional protection, the installation of a residual
current circuit-breaker with an activation power rating of not
more than 30 mA is recommended for the power circuit in the
bathroom. Ask your electrician for advice.
WARNING! RISK OF INJURY!
► This appliance may be used by children aged 8 years or more and
by persons with reduced physical, sensory or mental capabilities
or lack of experience and/or knowledge if they are supervised,
or have been instructed in the safe use of the appliance and have
understood the potential risks.
► Children must not use the appliance as a plaything.
► Cleaning and user maintenance should not be performed by
children unless they are under supervision.
► NEVER put the hairdryer down or leave it unsupervised when it is
switched on.
► Never place the hairdryer close to sources of heat and protect
the power cable against potential damage.
► Do not use the hairdryer if it has been dropped or is damaged in
any way. Have the appliance checked and/or repaired by quali-
fied technicians if necessary.
► Do not cover the air intake grille while operating the appliance.
Clean it at regular intervals.
► The hairdryer becomes hot when it is in use. Hold it only by the
grip when it is hot.

6SHTT 2200 A1
GB
IE
Preparation
1) Remove all parts of the appliance and the operating instructions from the carton.
2) Remove all packaging material.
Operation
This appliance is fitted with a contact sensor. This means that the hairdryer only
switches on if you are holding it in your hand and touching the sensor field 
at the same time.
Heating and blower levels
1) Insert the plug into the mains power socket.
The hairdryer is fitted with two function switches. You can use these to separately
select the strength of the air flow (blower level switch ) and the heat level (heat
level switch ):
Blower levels
0 hairdryer is switched off
reduced airflow
increased airflow
Heat levels
reduced heat level
medium heat level
high heat level
2) Select the desired blower level using the blower level switch . The control
lamp illuminates and shows that the hairdryer will start as soon as the
sensor field is contacted.
3) Select the desired heating level using the heating level switch .
4) If you are not holding the hairdryer in the hand:
take hold of the hairdryer with your hand on its handle. This means that you
will be touching the sensor field and the hairdryer will switch on.
If you put the hairdryer down for a short time, it will switch off automatically.

7
SHTT 2200 A1
GB
IE
NOTE
► The sensor-controlled cut-off is not suitable for switching off the hairdryer
permanently. If you are not using the hairdryer switch it off using the blower
level switch .
5) Once you have finished using it, switch the appliance off by switching the
blower level switch to "0". The indicator lamp goes out. Then remove
the plug from the wall socket.
Cold air level
With the cold air button Gyou can produce a cooler air flow with any
combination of blower and heat levels.
Ionisation function
This hairdryer is fitted with an ionisation function.
If hair is dried using a normal hairdryer, the hair becomes charged statically and
starts to "fly".
The ionisation function ensures that this charging of the hair is neutralised and
cancelled. The hair becomes soft, supple, shiny and easier to style.
Please note, however, that the ionisation function will only work optimally if the
attachments (finger diffuser /styling jet ) are removed as the attachment will
interfere with the application of the ions to the hair. Therefore, use the hairdryer
without attachments for maximum ionisation effect.