Silvercrest SBKG 40 A1 User manual

BLUETOOTH®ON-EAR HEADPHONES
BLUETOOTH®-ON-EAR-KOPFHÖRER
CASQUE AUDIO BLUETOOTH® SBKG 40 A1
IAN 374059_2104
CASQUE AUDIO BLUETOOTH®
Mode d’emploi
BLUETOOTH®-
ON-EAR-KOPFHÖRER
Bedienungsanleitung
BLUETOOTH®
ON-EAR HEADPHONES
Operating instructions
BLUETOOTH®-
ON-EAR-KOPTELEFOON
Gebruiksaanwijzing
SLUCHÁTKA S BLUETOOTH®
Návod k obsluze SŁUCHAWKI NAUSZNE
BLUETOOTH®
Instrukcja obsługi
SLÚCHADLÁ BLUETOOTH®
Návod na obsluhu
BLUETOOTH®-
ON-EAR-HOVEDTELEFONER
Betjeningsvejledning
AURICULARES BLUETOOTH®
DE DIADEMA
Instrucciones de uso

GB/ IE Operating instructions Page 1
DE/AT/CH Bedienungsanleitung Seite 25
FR/BE Mode d’emploi Page 51
NL/BE Gebruiksaanwijzing Pagina 81
CZ Návod k obsluze Strana 107
PL Instrukcja obsługi Strona 131
SK Návod na obsluhu Strana 157
ES Instrucciones de uso Página 181
DK Betjeningsvejledning Side 207
Before reading, unfold the page containing the illustrations and
familiarise yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus
und machen Sie sich anschließend mit allen Funktionen des Gerätes
vertraut.
Avant de lire le mode d‘emploi, ouvrez la page contenant les illustra-
tions et familiarisez-vous ensuite avec toutes les fonctions de l‘appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u
vertrouwd met alle functies van het apparaat.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi
funkcemi přístroje.
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie
proszę zapoznać się z wszystkimi funkcjami urządzenia.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so
všetkými funkciami prístroja.
Antes de empezar a leer abra la página que contiene las imágenes y,
en seguida, familiarícese con todas las funciones del dispositivo.
Før du læser, vend siden med billeder frem og bliv bekendt med alle
apparatets funktioner.

GB│IE │ 1 ■
SBKG 40 A1
Contents
Introduction.......................................3
Information about these operating instructions.....................3
Notes on trademarks ........................................ 3
Limitation of liability ......................................... 3
Proper use ................................................4
Warnings and symbols used ..................................4
Safety ...........................................6
Risk of hearing damage ......................................6
Risk of accidents ...........................................6
Notes on the radio interface ..................................7
Basic safety instructions ......................................7
Controls ..........................................9
Setting up .......................................10
Unpacking ...............................................10
Check package contents ....................................10
Charging the internal battery .................................11
Handling and operation............................12
Switching the headphones on/off .............................12
Wearing the headphones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Pairing/unpairing the headphones with a Bluetooth®device ......12
Music playback via Bluetooth®.............................14
Telephone functions ........................................15
Music playback via AUX IN..................................16
Storing the headphones .....................................17

■ 2 │ GB│IE SBKG 40 A1
Cleaning ........................................17
Storage when not in use ...........................17
Disposal.........................................18
Disposal of the device ......................................18
Disposal of the packaging ...................................18
Troubleshooting ..................................19
Fault causes and remedies ...................................19
Attachment ......................................21
Technical details...........................................21
Simplified EU Declaration of Conformity ........................22
Kompernass Handels GmbH warranty .........................22
Service ..................................................24
Importer.................................................24

GB│IE │ 3 ■
SBKG 40 A1
Introduction
Information about these operating instructions
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating instructions are
part of this product. They contain important information on safety, usage and
disposal.
Before using the product, please familiarise yourself with all operating and
safety instructions. Use the product only as described and for the range of
applications specified. Retain these operating instructions for future refer-
ence. Please also pass these operating instructions on to any future owner.
Notes on trademarks
USB
®
is a registered trademark of USB Implementers Forum, Inc.
The Bluetooth®logotype and Bluetooth®logo are registered
trademarks of Bluetooth SIG, Inc. (Special Interest Group). Any use of the
trademarks by Kompernaß Handels GmbH is made under the provisions of
a licence.
The SilverCrest trademark and the retail name are the property of their
respective owner.
All other names and products may be trademarks or registered trademarks
of their respective owner.
Limitation of liability
The manufacturer assumes no responsibility for damage caused by failure
to observe these instructions, improper use, incompetent repairs, unauthor-
ised modifications or for the use of non-approved replacement parts.

■ 4 │ GB│IE SBKG 40 A1
Proper use
This consumer electronics device is used to play back audio files which can
be transferred via Bluetooth®or 3.5 mm jack cable. You can use the
headphones as a headset to take calls using the integrated microphone
once the Bluetooth®connection has been made. The device is not intend-
ed for any other purpose nor for use beyond the scope described.
The device is not intended for use in commercial or industrial environments.
The manufacturer accepts no responsibility for damage caused by failure to
observe these instructions, improper use or repairs, unauthorised modifica-
tions or the use of unapproved replacement parts. The risk shall be borne
solely by the user.
Warnings and symbols used
The following warnings and symbols are used in these operating instruc-
tions:
DANGER
A warning at this hazard level indicates a potentially haz-
ardous situation.
Failure to avoid this hazardous situation could result in injuries or death.
► Follow the instructions on this warning label to avoid the risk of death
or serious injury.
WARNING
A warning at this hazard level indicates a potentially haz-
ardous situation.
Failure to avoid this hazardous situation could result in injury.
► Follow the instructions in this warning notice to prevent injuries.

GB│IE │ 5 ■
SBKG 40 A1
CAUTION
A warning at this hazard level indicates a risk of property
damage.
Failure to avoid this situation could result in property damage.
► Follow the instructions in this warning notice to prevent property dam-
age.
ATTENTION
A warning at this hazard level indicates a risk of property
damage.
Failure to avoid this situation could result in property damage.
► Follow the instructions in this warning notice to prevent property dam-
age.
NOTE
► A note provides additional information which makes handling the
device easier for you.

■ 6 │ GB│IE SBKG 40 A1
Safety
This section contains important safety instructions for using the headphones.
These headphones comply with statutory safety regulations. Improper use
may result in personal injury and property damage.
Risk of hearing damage
CAUTION
Danger due to excessive volume!
Loud music can lead to hearing damage.
► Take care when using these headphones. Using headphones for long
periods and at high volume levels can lead to hearing damage. Al-
ways start by setting a low volume and then adjust it to a comfortable
level. Always use headphones in such a way that you can still hear
ambient noise.
Risk of accidents
WARNING
Risk of impaired perception!
► Acoustic warning and indication signals and ambient noise can sound
different while you are wearing these headphones. Make sure you
are aware of how these signals deviate in their sound so that you can
recognise the signals in the appropriate situations.
► Do not use the headphones while driving a vehicle, riding a bicycle,
operating machinery or in any other situation in which impaired
perception of ambient noise could put you or other people in danger.
Please also observe the statutory provisions and regulations of the
country in which you are using the headphones.

GB│IE │ 7 ■
SBKG 40 A1
Notes on the radio interface
ŶSwitch off the device if you are in an aeroplane, hospital, operating
theatre or in the vicinity of a electronic medical system. The transmitted
radio waves can affect the functionality of sensitive devices.
ŶKeep the device at least 20 cm away from a pacemaker or implanted
defibrillator, as the proper functioning of the pacemaker or the implant-
ed defibrillator could be affected by radio waves.
ŶThe transmitted radio waves can cause noise interference in hearing
aids.Do not use the unit with the radio components switched on in the
presence of flammable gases or in a potentially explosive atmosphere
(e.g. in a paint shop), as the transmitted radio waves can cause an
explosion or ignite a fire.
ŶThe range of the radio waves is dependent on the environment and the
ambient conditions.
ŶData transmissions via a wireless connection can be intercepted by
unauthorised third parties.
Basic safety instructions
To ensure safe operation of the headphones, follow the safety guidelines
set out below:
ŶCheck the headphones for visible external damage before use. Do
not operate damaged headphones or headphones that have been
dropped.
ŶProtect the cables against damage, for example caused by sharp
edges, hot areas, clamping or crushing.
ŶIf the cables or connections are damaged, have them replaced by
authorised specialists or Customer Service.

■ 8 │ GB│IE SBKG 40 A1
ŶThis device may be used by children aged 8 years and above and by
persons with limited physical, sensory or mental capabilities, or lack of
experience and knowledge, provided that they are under supervision
or have been told how to use the device safely and are aware of the
potential risks. Do not allow children to play with the device. Cleaning
and user maintenance tasks may not be carried out by children unless
they are supervised.
ŶDANGER! Do not allow children to play with the packaging materi-
al! Keep all packaging materials away from children.
There is a risk of suffocation!
ŶThe headphones should only be repaired by authorised specialist per-
sonnel or the customer service department. Improper repairs may put
the user at risk. They will also invalidate any warranty claim.
ŶDo not make any unauthorised modifications or alterations to the head-
phones. This device may not be opened by the user.
ŶEnsure that the charger cable is not stretched tightly or kinked.
ŶDo not expose the device to direct sunlight or high temperatures. Other-
wise, it may become overheated and irreparably damaged.
ŶATTENTION! Do not operate the device close to naked flames
(e.g. candles) and do not place burning candles on or next to the
device. This will help to prevent fires.
ŶThe device may heat up while it is charging. Place the device in a
well-ventilated location during the charging process and do not cover it.
ŶProtect the device from penetration by moisture and liquids. Never
submerge the device in water or place objects filled with liquids (e.g.
vases) close to the device.
ŶSwitch the device off immediately and disconnect any connected
cables from the device if you hear any unusual noises, smell fumes or
notice any smoke. Have the device checked by a qualified specialist
before using it again.

GB│IE │ 9 ■
SBKG 40 A1
ŶWARNING! Mishandling the batteries can cause fires, explosions,
leakages or other hazards! Do not throw the device into a fire, since
the integrated battery may explode.
ŶRisk of fire or explosion, if the battery is replaced by an incorrect type.
ŶDisposal of a battery into fire or a hot oven, or mechanically crushing
or cutting of a battery can result in an explosion.
ŶLeaving a battery in an extremely high temperature surrounding envi-
ronment can result in an explosion or the leakage of flammable liquid
or gas.
ŶA battery subjected to extremely low air pressure may result in an
explosion or the leakage of flammable liquid or gas.
ŶComply with all restrictions or prohibitions on use for battery-powered
devices in locations with specific hazard risks, such as petrol stations,
aeroplanes, hospitals, etc.
Controls
(See fold-out page for illustrations)
1Adjustable headband
2Earpieces (with ear cushions)
3button (increase volume/next track)
4button (switch the device on/off/playback/pause)
5button (reduce volume/start track/previous track)
6LED
7USB-C charging socket DC IN
8Bluetooth®pairing button
9Microphone

■ 10 │ GB│IE SBKG 40 A1
0AUX IN socket (3.5 mm Ø jack socket)
qUSB charging cable (USB type-C to USB type-A)
wAudio cable (3.5 mm jack plug)
eOperating instructions (symbol)
Setting up
Unpacking
♦ Unpack all parts of the device from the packaging and remove all
packaging materials.
Check package contents
(See fold-out page for illustrations)
The following components are included in delivery:
● Bluetooth®headphones
● USB charging cable (USB type-C to USB type-A)
● Audio cable (3.5 mm jack plug)
● Quick start guide
● These operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of
defective packaging or during transport, contact the Service hotline
(see section Service).

GB│IE │ 11 ■
SBKG 40 A1
Charging the internal battery
NOTE
► Before using the headphones, the integrated battery must be com-
pletely charged.
CAUTION
► Charge the headphones only in dry indoor spaces.
► Use only the supplied USB charging cable qto charge the head-
phones.
► Disconnect the USB charging cable qwhen charging is complete.
♦ Make sure that the headphones are switched off. To switch off the
headphones, press the button 4for about 2seconds until a beep
sounds and the LED6goes out.
♦ Connect the USB-A plug on the USB charging cable qto a USB
mains adapter or a USB port on your computer.
♦ Connect the USB-C plug of the USB charging cable qto the
USB-C charging port DC IN 7on the headphones.
NOTE
► The LED 6lights up white during charging. When the battery is fully
charged, the LED 6switches off.
► Charging takes about 2.5 hours at a charging current of 500 mA.
When the battery is fully charged, you can play back music at a me-
dium volume (85 dB(A)) for up to 15 hours. The playback time may
vary depending on level of the volume.
► When the battery is empty, the LED
6 flashes white once every 10
seconds and a signal tone sounds. The headphones then switch off
automatically.

■ 12 │ GB│IE SBKG 40 A1
Handling and operation
Switching the headphones on/off
♦ Press the button 4for about 2 seconds to switch on the head-
phones. You will hear a beep and the LED 6lights up blue for
approx. 2 seconds. Afterwards, the LED 6 flashes blue and white. The
headphones are now in pairing mode.
♦ To switch off the headphones, press the button 4again for about
2 seconds until you hear a beep and the LED6goes out.
Wearing the headphones
♦ When putting the headphones on, please note the markings “R” (right)
and “L” (left) on the inside of the adjustable headband 1.
♦ Adjust the headband 1so that it fits your head comfortably and the
earpieces 2cover your ears.
Pairing/unpairing the headphones with a Bluetooth®
device
Before you can use the headphones with the Bluetooth
®
function, you must
pair them with a compatible Bluetooth
®
device.
♦ Switch on the headphones as described above to activate pairing mode.
♦ Set the Bluetooth®playback device so that it scans for Bluetooth®
devices. A detailed description of how to do this can be found in the
operating manual for your Bluetooth®playback device.
♦ Select the entry SBKG 40 A1 from the list of devices found on your
Bluetooth®playback device and, if required, enter the code 0000
to connect the two devices. If the pairing is successful, you will hear a
series of beeps and the LED 6will flash blue every 5 seconds.

GB│IE │ 13 ■
SBKG 40 A1
♦ To terminate the Bluetooth®connection, either disable the
Bluetooth®function on the Bluetooth®playback device or hold
down the Bluetooth® pairing button 8for about 2 seconds until
the LED 6flashes blue and white. The headphones are now in pairing
mode again.
♦ Alternatively, switch the headphones off as described above to deacti-
vate the Bluetooth®function.
NOTE
► The next time you turn on the headphones, they will automatically
connect to the last Bluetooth®playback device that was connect-
ed. If your Bluetooth®playback device does not automatically
reconnect to the headphones, you will have to re-establish the connec-
tion manually. A detailed description of how to do this can be found
in the operating manual for your Bluetooth®playback device.
► If no Bluetooth®connection can be made within 10 minutes, pairing
mode ends and the headphones switch off automatically.
► If there is an existing Bluetooth®connection but no music playback
within 10 minutes, the headphones switch off automatically.
► Ensure that the headphones are no more than 10 metres away from
the Bluetooth®playback device. Make sure that there are no barri-
ers or electronic devices placed between them.
► As soon as you connect the AUX IN socket 0to the audio cable w,
the Bluetooth®function is deactivated and the headphones change
to AUX IN mode. The Bluetooth®function can only be reactivated
once you remove the audio cable w from the AUX IN socket 0.

■ 14 │ GB│IE SBKG 40 A1
Music playback via Bluetooth®
The following music playback functions are only available when the
headphones and the playback device are connected to each other via
Bluetooth®.
NOTE
► It may be the case that not all functions will be supported depending
on the playback device used and its operating system.
Button Function
4► Press briefly to play/pause the music.
3
► Press briefly to increase the volume. When you
reach the maximum volume you will hear a beep.
► Press and hold to jump to the next track.
5
► Press briefly to decrease the volume. When you
reach the minimum volume, you will hear a beep.
► Press and hold to jump back to start of the track.
Press and hold again within 2 seconds to jump to
the previous track.

GB│IE │ 15 ■
SBKG 40 A1
Telephone functions
The following telephone functions are only available when the headphones
and the playback device are connected to each other via Bluetooth®.
NOTE
► It is possible that not all functions will be supported depending on the
smartphone used and its operating system.
Making a call
♦ Use your smartphone to dial the required telephone number.
The call is automatically transferred to the headphones.
♦ Speak into the microphone 9on the headphones to make your call.
Accepting/ending/rejecting a call
NOTE
► If you are listening to music and receive a call, you will hear the
ringtone in the headphones and playback is stopped. After finishing
the call, playback will be resumed automatically.
► You can accept/reject calls via the headphones or your smartphone.
The sound is automatically played back through the headphones.
Button 4Function
Press 1 x briefly (for incoming call) Accept call
Press 1x briefly (during call) End call
Press and hold for approx. 2 seconds
(for incoming calls) Reject call

■ 16 │ GB│IE SBKG 40 A1
Music playback via AUX IN
You can use the supplied audio cable wto connect the headphones to
non- Bluetooth®-compatible playback devices. In AUX IN mode, the
headphones behave like normal, cable-connected headphones and can
even be used with an empty battery. The Bluetooth®function is deactivat-
ed and the buttons on the headphones do not function.
♦ Make sure that the headphones are switched off.
♦ Connect the audio cable wto the AUX IN socket 0of the head-
phones.
♦ Connect the audio cable wto the audio output (e.g. headphone jack)
on the playback device.
♦ Switch on the playback device and set the volume to minimum.
♦ Put on the headphones as described in the section Wearing the
headphones.
♦ Set the desired volume on the playback device.

GB│IE │ 17 ■
SBKG 40 A1
Storing the headphones
Your headphones are fitted with swivelling earpieces 2, allowing them to
be folded and stored without taking up much space.
Proceed as follows to fold the headphones:
♦ Swivel both earpieces 2so that they are inside the headband 1
(see fig. 1).
You can now store the headphones in a space-saving way.
Fig. 1
Cleaning
CAUTION
► Do not allow any liquids to get into the headphones. This could cause
irreparable damage to the device.
► Do not use aggressive or abrasive cleaning agents, as these can
damage the device surfaces.
♦ Clean the outer surfaces of the headphones with a slightly damp cloth.
Storage when not in use
♦ Store the headphones in a location which is clean, dry, dust-free and
out of direct sunlight.
♦ To ensure a long battery life, charge the battery at regular intervals.