Silvercrest OML807 Instruction sheet

Wireless Multimedia Laser Mouse
with USB Nano receiver
Wireless Multimedia
Laser Mouse
with USB Nano receiver
User manual and
service information
Langaton laserhiiri
sisältää
USB-nanovastaanottimen
Käyttöopas ja
huolto-ohjeet
GB
FI
IE
OML807
Trådlös lasermus
med USB-nanomottagare
Bruksanvisning
och serviceinformation
Multimedia-laser-radiomus
med USB-nano-modtager
Brugervejledning
og serviceinformation
SE
DK
Multimedia-Laser-Funkmaus
mit USB-Nano-Empfänger
Bedienungsanleitung
und Serviceinformationen
CH

Wireless Multimedia Laser Mouse OML807
English - 1
Overview
1 Left mouse button
2 Right mouse button
3 Tilt wheel (4-way fast scroll wheel)
Volume control and mute (media mode)
4 800/1600 cpi toggle switch (press briefly)
Standard / media mode toggle switch
(keep pressed for 3 seconds)
5 Battery level indicator
6 Zoom - (default mode)
Play / Pause (media mode)
7 Zoom + (default mode)
Launch Media Player (media mode)
8 Back (default)
Previous title (media mode)
9 Forward (default)
Next title (media mode)

Wireless Multimedia Laser Mouse OML807
2 - English
Contents
Overview .......................................................................................... 1
Important Safety Instructions ........................................................... 3
Intended Use ................................................................................3
Operating Environment................................................................. 4
Children and Persons with Disabilities .........................................5
Batteries........................................................................................ 6
R/F Interface .................................................................................6
Repair and Maintenance............................................................... 7
Copyright ......................................................................................8
Storing When Not Using the Product............................................ 8
Conformity Notice .........................................................................9
Disposal of Old Devices................................................................ 9
Package Contents..........................................................................10
Introduction..................................................................................... 10
System Requirements....................................................................11
Hardware Installation......................................................................11
Inserting the Battery.................................................................... 11
Connecting the USB Nano Receiver ..........................................13
Software Installation.......................................................................14
Operation........................................................................................ 16
Toggling between Operating Modes........................................... 16
Configuration ..............................................................................16
Attachment .....................................................................................18
Troubleshooting..........................................................................18
Technical Data............................................................................ 19
Warranty Information...................................................................... 20

Wireless Multimedia Laser Mouse OML807
English - 3
Important Safety Instructions
Before you use this device for the first time, please read the
following notes in this manual and heed all warnings, even if you
are familiar with handling electronic devices. Keep this manual safe
for future reference. If you sell the device or pass it on, it is
essential you hand over this manual also.
This icon denotes important information for the safe
operation of the product and for the user’s safety.
This icon alerts about a strong light source.
This symbol denotes further information on the topic.
Warning: Laser Radiation! Laser Class 1
Avoid damage to your eyes! Never look into the laser beam. Never
point the laser beam directly at people or animals!
Intended Use
This wireless multimedia laser mouse, consisting of a wireless laser
mouse and USB nano receiver, is an IT device. The device may not
be used outdoors or in tropical climates. This product has not been
designed for corporate or commercial (e.g. office) applications. Use

Wireless Multimedia Laser Mouse OML807
4 - English
the product in domestic environments for private applications only.
This device fulfils all that relates to CE Conformity, relevant norms
and standards. Any modifications to the equipment other than
recommended changes by the manufacturer may result in these
directives no longer being met. The manufacturer is not liable for
any damage or interference caused by unauthorized modifications.
Only use the accessories recommended by the manufacturer. Any
use other than that mentioned above does not correspond to the
intended use.
If you are not using the device within the Republic of Germany, you
must observe the regulations and laws in the country of use.
Operating Environment
Position the wireless laser mouse on a stable, flat surface and do
not place any objects on the device. The device is not for use in
environments with a high temperature or humidity (e.g. bathrooms),
and must be kept free of dust. Operating temperature and operating
humidity: 5°C to 40°C, max. 90% RH.
Always make sure that:
-no direct heat sources (e.g. heating) can affect the device;
-no direct sunlight or artificial light reaches the device;
-contact with spray, dripping water and corrosive liquids must be
avoided and the device should never be operated near water,
and it must especially never be immersed (do not place any
objects filled with liquids such as vases or drinks near the
device);
-the device is never placed in the immediate vicinity of magnetic
fields (e.g. loudspeakers);

Wireless Multimedia Laser Mouse OML807
English - 5
-no fire sources (e.g. burning candles) are placed on or near the
device;
-no foreign bodies are introduced into the device;
-the device should not be subject to any sharp temperature
changes;
-the device is not subject to excessive shocks and vibrations;
Children and Persons with Disabilities
Electrical appliances do not belong in the hands of children. Also
people with disabilities shall use electrical devices accordingly. Do
not allow children or persons with disabilities to use electrical
devices when not under supervision. These people may not
comprehend the presence of potential risks. Batteries and small
parts represent potential choking hazards. Keep the batteries out of
reach. If a battery is swallowed, seek medical help immediately.
Keep the packaging away from children and persons with
disabilities too. as there is danger of suffocation.

Wireless Multimedia Laser Mouse OML807
6 - English
Batteries
Insert the battery with the correct polarity. Never throw the battery
into the fire. Remove the battery if the device is not going to be
used for a long time. Non-intended use may cause explosion and
danger to life.
R/F Interface
Please switch off the appliance in airplanes, hospitals, operating
theatres and in the vicinity of medical electronic system. The radio
waves transmitted could impair the functionality of sensitive
appliances.
Observe a minimum distance of 20 cm between the appliance and
any pacemaker as the radio waves could impair the function of the
pacemaker.
The transmitted radio waves may create interference noises in
hearing aids.
Do not allow the appliance to be introduced in the vicinity of
inflammable gases or in environments subject to a risk of explosion
(e.g. paint shops) as long as the radio component is switched on,
because the transmitted radio waves could trigger an explosion or
fire.
The coverage/range of the radio waves varies depending on the
surrounding and environmental conditions.

Wireless Multimedia Laser Mouse OML807
English - 7
In any data exchange via wireless connections, unauthorized third
parties are also able to receive the data. Targa GmbH is not liable
for any radio or television interference caused by unauthorized
modifications of this appliance. Targa furthermore accepts no
liability for the replacement or exchange of connection cables and
appliances not specified by Targa GmbH. The user is solely
responsible for the elimination of interferences caused by such an
unauthorized modification, as well as for the replacement or
exchange of the appliances concerned.
Repair and Maintenance
Repairs are required when this device has been damaged in any
way, for example, when liquid has entered the product, when the
product has been exposed to rain or moisture, when the product
does not work normally or if the product has been dropped. If
smoke, unusual noises or smells are noticed, power off the device
immediately. In this case the device should not be used further and
should be inspected by authorized service personnel. Please
contact qualified personnel when repair is needed. Never open the
housing of the device, or the accessories. Only use a clean, dry
cloth for cleaning. Never use any corrosive liquids.

Wireless Multimedia Laser Mouse OML807
8 - English
Copyright
The entire content of this User’s Manual is copyrighted and is
provided to the reader for information purposes only.
Copying data and information without the prior written and explicit
authorization from the author is strictly forbidden. This also applies
to any commercial use of the contents and information.
All texts and figures are up-to-date as per the date of print release.
We assume no liability for any changes.
Storing When Not Using the Product
If the wireless laser mouse is going to be left unused for a long
period of time, remove the battery . Remove the USB nano receiver
from your computer’s USB port and insert it into the storage
compartment of the wireless laser mouse. Also make sure that the
storage temperature is maintained between 5 °C and 40 °C.
Humidity must not exceed 90% RH.

Wireless Multimedia Laser Mouse OML807
English - 9
Conformity Notice
The wireless laser mouse has been tested and
approved for compliance with the basic and other
relevant requirements of the R&TTE Directive
1999/5/EC. The corresponding Declaration of
Conformity can be found at the end of this User's
Manual.
Disposal of Old Devices
Devices marked with this symbol are subject to the
European Directive 2002/96/EC. All electric and
electronic devices must be disposed of separately
from household waste at established bodies. The USB
nano receiver is also an electronics device and must
be properly disposed of.
Avoid hazards to the environment and dangers to your personal
health by disposing of the device properly. For further information
about proper disposal, contact your local government, disposal
bodies or the shop where you bought the device.
Respect the environment. Old batteries do not belong in with
domestic waste. They must be handed in to a collection point for old
batteries.
Also recycle the packaging material properly. Cardboard packaging
can be taken to paper recycling containers or public collection
points for recycling. Any films or plastic contained in the packaging
should be taken to your public collection points.

Wireless Multimedia Laser Mouse OML807
10 - English
Package Contents
Please check the completeness of package contents using the
following list:
-Wireless Multimedia Laser Mouse OML807
-USB nano receiver
(inserted into the wireless laser mouse)
-1 AA brand-name battery, 1.5V
-Driver CD
-User's Manual
If you find any items missing or damaged, please phone our hotline.
You will find the corresponding phone number in the last chapter
“Warranty Information”.
Introduction
Thank you for purchasing this SilverCrest OML807 wireless
multimedia laser mouse. In addition to the 3 standard buttons, this
wireless laser mouse is equipped with five special buttons that
enable access to frequently used functions. The scroll wheel is a 4-
way fast scroll wheel that enables both vertical and horizontal
scrolling. The fast scroll wheel also allows hyper-fast scrolling. With
the special CPI button (4) you can toggle between a resolution of
800 cpi and 1600 cpi or between standard and media functionality.
This wireless laser mouse also features an automatic standby
function. If the wireless laser mouse is not used for a certain time it
will power off. Press any button on the wireless laser mouse to
power it back on.

Wireless Multimedia Laser Mouse OML807
English - 11
System Requirements
-Intel®Pentium®III / AMD Athlon™ or higher
-1 free USB 2.0 port
-Microsoft®Windows®XP, Windows Vista®or Windows®7
-CD-ROM drive or DVD drive for installing the software
Hardware Installation
Inserting the Battery
Insert the supplied battery into the wireless laser mouse.
10 Laser sensor
11 Inserted USB nano receiver
12 On/Off button

Wireless Multimedia Laser Mouse OML807
12 - English
Open the battery compartment on the bottom of the wireless
laser mouse.
Insert the supplied battery (size AA) into the wireless laser
mouse with the correct polarity (+ and -); see the illustration.
Remove the USB nano receiver.
Close the battery compartment.
Press the On/Off button (12) on the bottom of the wireless laser
mouse to power it on.
If the indicator light (5) on the upper side of the
wireless laser mouse lights up orange, the battery is
depleted. When this happens, replace the battery
with a new battery of the same type.
Should the wireless laser mouse fail to work, power
it off and back on. Sometimes removing and re-
inserting the battery will also help.
After inserting a rechargeable battery into the
wireless laser mouse or after powering the wireless
laser mouse on, the indicator (5) will flash several
times during automatic synchronisation with the
receiver. When the synchronisation is completed, the
status indicator will stop lighting.

Wireless Multimedia Laser Mouse OML807
English - 13
Connecting the USB Nano Receiver
If your previous mouse is still connected to the computer, please
shut down the computer, disconnect the appliance and then restart
the computer.
Connect the USB Nano Receiver (12) to a free USB port of your
running computer.
The operating system will automatically recognize the new
hardware and install the required drivers. Depending on the
operating system installed, the following screen messages may
appear:
Windows®XP
When the receiver is connected for the first time, the operating
system displays the message „New hardware detected“. Wait
until the message „The new hardware has been installed and is
now ready for use“ is displayed before using your wireless laser
mouse.
Windows Vista®, Windows®7
When the receiver is connected for the first time, the operating
system displays the message „Installation of appliance driver
software“. Wait until the message „The appliances are ready for
use now“ appears. The wireless laser mouse is now operational
and ready to be used.

Wireless Multimedia Laser Mouse OML807
14 - English
Software Installation
If you would like to use all of the functions of your wireless laser
mouse you need to install the software included. Insert the included
CD-ROM in the CD-ROM drive of your computer. The installation
process should start automatically, failing that, start the CD-ROM
file "setup.exe" manually by double-clicking it.
Only with the operating system Windows®7, Windows Vista®will
the installation initially be stopped by the user account control
function with the message: „An unidentified program is attempting
to access the computer”. Click on „OK“ to continue with the
installation.
The following installation illustrations correspond to the operating
system Windows®7. The windows shown in the operating systems
Windows®XP/Vista are slightly different, but their content is the
same.
Click on Next to start the
installation.

Wireless Multimedia Laser Mouse OML807
English - 15
Here you can select the target file
for the installation via the Change
button or use the suggested file.
Click on Next to proceed with the
installation.
Click Finish to finish the setup
programme.
If you are prompted to restart your computer, restart
it before using the software.

Wireless Multimedia Laser Mouse OML807
16 - English
Operation
Toggling between Operating Modes
The CPI button (4) puts you in a position to toggle between the
optical scan resolutions of 800 cpi und 1600 cpi. The scanning is
more precise at 1600 cpi and the mouse cursor will move faster
given the same movements.
If you would like to toggle between standard operation and media
operation, press the CPI button (4) and keep it pressed for a
minimum of 3 seconds until the power control lamp (5) briefly lights
up.
When switching to 1600 cpi resolution, the control light (5) will blink
fast. When switching to 800 cpi resolution, the control light will blink
slowly.
Please see the list on page 1 for information on the functions
available in the media operation mode.
Configuration
Double-click on the icon in the task bar (lower-right corner on
your screen, near the system clock). Or right-click on the icon and
select “Open” from the context menu. The mouse configuration
menu will appear.

Wireless Multimedia Laser Mouse OML807
English - 17
Here you can specify functions
for selected mouse buttons.
Simply click on the selection
switch next to the corresponding
mouse button and select a
function from the menu by
clicking on it with the left mouse
button.
You can restore the mouse to its
original state by clicking on the
„Restore to default“ button.
All selected options apply to the default mode. The
button assignments for media mode cannot be
modified.
If you would like to apply your changes, please click on the „Apply“
button (the window will still stay open) or the „OK“ button (the
window will close).
Tip for users of Microsoft®Windows®7, Windows Vista®
(Windows®XP does not include this function):
You can also adjust the horizontal scrolling of the tilt wheel in the
system control of the operating system in the submenu „Mouse“.
The configuration menu of the mouse driver needs to be closed in
order to access the system control menu.

Wireless Multimedia Laser Mouse OML807
18 - English
Attachment
Troubleshooting
If the wireless laser mouse is not being recognized following
installation or does not respond to input, please check the following:
;Please check the polarity of the battery.
;Please check if the wireless laser mouse is switched on.
;Check whether the miniature USB receiver is properly
connected to the computer; see page 13 – Connecting the
USB Receiver).
;Try another USB port.
;Check the charging level of the battery and if necessary insert
a new battery.
;Please note that you need to use a mat (e.g. mouse pad) if
you intend to use the wireless laser mouse on a glass surface
or glossy surface.

Wireless Multimedia Laser Mouse OML807
English - 19
Technical Data
-Wireless multimedia laser mouse with USB nano receiver
-Laser Class 1
-8 buttons, 7 of which are programmable
-Tilt wheel for vertical and horizontal scrolling and hyper-fast
scrolling
-Selectable resolution: 800 cpi or 1600 cpi
-Smart Link (no complicated connection process required for
receiver and wireless laser mouse)
-Radio frequency: 2.4 GHz
-Power supply: 1 AA battery, 1.5 V
-Toggling between Media Player and Office Mode (standard
operation) by simple key operation
-Range: up to 5m
-Dimensions of wireless mouse:
125 mm x 82 mm x 40 mm (LxWxH)
-Dimensions of USB nano receiver:
15,5 mm x 7 mm x 18 mm (LxWxH)
-Weight of the wireless laser mouse: 116 g
(without the battery, with the USB nano receiver inserted)