Silvercrest SFM 4 A1 User manual

Wireless Optical MOuse sFM 4 a1
IAN 279402
Wireless Optical MOuse
Operating instructions
Optische FunkMaus
Bedienungsanleitung
Optisk Mus
Betjeningsvejledning
Optische draadlOze Muis
Gebruiksaanwijzing

GB/IE/NI Operating instructions Page 1
DK Betjeningsvejledning Side 25
NL/BE Gebruiksaanwijzing Pagina 49
DE/AT/CH Bedienungsanleitung Seite 73
Before reading, unfold the page containing the illustrations and
familiarise yourself with all functions of the device.
Før du læser, vend siden med billeder frem og bliv bekendt med
alle apparatets funktioner.
Vouw vóór het lezen de pagina met de afbeeldingen open en
maak u vertrouwd met alle functies van het apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus
und machen Sie sich anschließend mit allen Funktionen des
Gerätes vertraut.
Optisk Mus
Betjeningsvejledning

SFM 4 A1 – Software CD
�黑印刷
Wireless Optical MOuse sFM 4 a1
IAN 279402
Wireless Optical MOuse
Operating instructions
Optische FunkMaus
Bedienungsanleitung
Optisk Mus
Betjeningsvejledning
Optische draadlOze Muis
Gebruiksaanwijzing
CV_279402_SFM4A1_LB6.indd 2 20.06.16 16:44

IAN 279402
Kompernass Handels GmbH
BURGSTRASSE 21
44867 BOCHUM
DEUTSCHLAND/GERMANY
www.kompernass.com
Last Information Update · Tilstand af information
Stand van de informatie · Stand der Informationen:
06/2016 · Ident.-No.: SFM4A1-062016-2
6

SFM 4 A1
GB│IE│NI│1 ■
Contents
Introduction ..........2
Copyright .............2
Limitation on liability .....2
Intended use ...........3
Warnings used .........4
Notes on trademarks ....5
Safety...............5
Basic safety guidelines ...5
Controls and package
contents .............9
Initial operation.......9
Check package contents .9
Disposal of packaging
materials .............10
Inserting/replacing the
batteries .............11
Connecting the nano-USB
receiver ..............11
Power-saving mode.....12
Changing operating
modes ...............12
Installing the software ...13
Configuration of the mouse
buttons ..............15
Troubleshooting .... 17
Cleaning........... 18
Storage when not
in use ............. 18
Disposal ........... 19
Disposal of the device...19
Disposal of batteries ....19
Appendix.......... 20
Technical data.........20
Notes on the EU Declara-
tion of Conformity ......21
Kompernass Handels
GmbH warranty .......21
Service ..............24
Importer .............24

SFM 4 A1
■ 2│GB│IE│NI
Introduction
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating
instructions are part of this product. They contain impor-
tant information on safety, usage and disposal. Before
using the product, familiarise yourself with all handling
and safety guidelines. Use the product only as described
and for the range of applications specified. Keep these
operating instructions in a safe place. Please also pass
these operating instructions on to any future owner(s).
Copyright
This documentation is subject to copyright protection.
Any reproduction, or any reprint even in the form of
excerpts, as well as the rendition of figures even in modi-
fied form, is only permitted with the manufacturer’s written
consent.
Limitation on liability
All the technical information, data and instructions regard-
ing installation, connection and operation contained in
these operating instructions corresponds to the latest infor-
mation available to us at the time of printing and takes
our previous experience and know-how into account.

SFM 4 A1
GB│IE│NI│3 ■
No claims may be derived from the specifications, figures
and descriptions in these operating instructions. The manu-
facturer assumes no responsibility for damage caused
by failure to observe these instructions, improper use,
incompetent repairs, making unauthorised modifications
or for using unapproved replacement parts.
Intended use
This wireless mouse is an information technology device
designed as an input device for a computer. The device
must not be used outside of closed rooms. This device
is not intended for use in companies or for other com-
mercial uses (e.g. office productivity applications). Use
the device only in the home for private purposes. It is
not intended for any other use. Claims of any kind for
damage arising as a result of incorrect use will not be
accepted. The risk shall be borne solely by the user.

SFM 4 A1
■ 4│GB│IE│NI
Warnings used
The following warnings are used in these operating
instructions:
DANGER
A warning at this hazard level indicates
an imminently hazardous situation.
Failure to avoid this hazardous situation could
result in severe injuries or even death.
► Follow the instructions in this warning notice to
avoid the risk of serious injuries or death.
CAUTION
A warning at this hazard level indicates
potential material damage.
Failure to avoid this situation could result in material
damage.
► Follow the instructions in this warning to prevent
material damage.
NOTE
► A note indicates additional information that eases
device handling.

SFM 4 A1
GB│IE│NI│5 ■
Notes on trademarks
- USB®is a registered trademark of USB Implementers
Forum, Inc.
- Microsoft®, Windows®and other Microsoft product
names are registered trademarks of the Microsoft
Corporation.
- Intel®and Pentium®are registered trademarks of the
Intel Corporation.
- AMD®and AMD®Athlon™ are registered trademarks
of Advanced Micro Devices, Inc.
All other names and products may be trademarks or
registered trademarks of their respective owners.
Safety
In this section, you will receive important safety advice
relating to device handling. Improper use may result in
personal injury and material damage.
Basic safety guidelines
To ensure safe handling of the device, follow the safety
guidelines set out below
■DANGER! LED radiation!
Avoid damage to eyes. Do not stare into the LED
beam. Do not look directly at the LED beam using
optical instruments.

SFM 4 A1
■ 6│GB│IE│NI
■This appliance may be used by children aged 8
over and by persons with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge, provided that they are under supervision
or have been told how to use of the appliance safely
and are aware of the potential risks. Children must
not play with the appliance. Cleaning and user main-
tenance tasks must not be carried out by children
unless they are supervised.
■Prior to use, check the device for visible external
damage. Do not operate a device that has been
damaged or dropped.
■Always place the device on a stable and level surface.
It can be damaged if dropped.
■Do not expose the device to direct sunlight or high
temperatures. Otherwise it may overheat and be
irreparably damaged.
■Do not place the product near heat sources such
as radiators or other heat-generating devices.
■Never attempt to open the device.
■Do not make any unauthorised modifications or
alterations to the device.
■Do not expose the device to spray or dripping water
and do not place liquid-filled objects, such as vases
or open drink containers, on or near the device.

SFM 4 A1
GB│IE│NI│7 ■
■DANGER! Packaging materials such as plastic
film must not be used as playthings.
Risk of suffocation!
DANGER
Mishandling the batteries can cause fires,
explosions, leakages or other hazards!
► Do not throw the batteries into a fire and do not
subject them to high temperatures.
► Do not open, deform or short-circuit batteries,
since this can lead to chemical leakage.
► Do not attempt to recharge batteries. Do not
charge batteries unless they are explicitly labelled
as "rechargeable". There is a risk of explosion!
► Check the condition of the batteries at regular
intervals. Leaking chemicals can cause permanent
damage to the device. Take particular care when
handling damaged or leaking batteries. Risk of
chemical burns! Wear protective gloves.
► Chemicals which leak from a battery can cause
skin irritation. In event of contact with the skin, rinse
with copious amounts of water. If the chemicals come
into contact with your eyes, rinse thoroughly with
water, do not rub and consult a doctor immediately.

SFM 4 A1
■ 8│GB│IE│NI
DANGER
► Keep batteries out of the reach of children.
Children can put batteries into their mouth and
swallow them. If a battery has been swallowed,
seek medical assistance immediately as this can
lead to severe internal burns (or even death) within
two hours.
► Do not mix different types of batteries.
► Always insert the batteries the right way round
(observe correct polarity) otherwise there is a
danger that they could explode.
► If you do not intend to use the device for a long
time, remove the batteries.

SFM 4 A1
GB│IE│NI│9 ■
Controls and package contents
1Left mouse button
2Right mouse button
3Scroll wheel
4DPI button
5Back button
6Forward button
7Optical sensor
8Battery compartment
9Storage compartment for the nano-USB receiver
0Nano-USB receiver
qSoftware CD
w2 x 1.5 V batteries
eOperating instructions
Initial operation
Check package contents
The following components are included in delivery:
● Wireless mouse SFM 4 A1
● Nano-USB receiver 0
● Software CD q
● 2 x 1.5 V batteries w
● These operating instructions e

SFM 4 A1
■ 10│GB│IE│NI
NOTE
► Check the consignment for completeness and for
signs of visible damage.
► If the consignment is incomplete or damaged due
to defective packaging or carriage, contact the
Service hotline (see the chapter Service).
Remove all parts of the device from the packaging and
remove all packaging materials.
Disposal of packaging materials
The packaging protects the device from damage during
shipment. The packaging materials have been selected
for their environmental friendliness and ease of disposal
and are therefore recyclable.
Returning the packaging to the materials
cycle conserves raw materials and reduces
the amount of waste that is generated.
Dispose of packaging materials which are no longer
needed in accordance with applicable local regulations.

SFM 4 A1
GB│IE│NI│11 ■
Inserting/replacing the batteries
♦ Open the battery compartment 8on the underside
of the wireless mouse.
♦ Insert 2 x 1.5 V AA batteries into the battery com-
partment 8(observe correct polarity). First place
one battery in the lower compartment and then the
second battery in the higher compartment. Ensure
that the plastic strip is positioned under the batteries,
this will make future battery exchanges easier.
♦ Close the battery compartment 8.
CAUTION
► Always use batteries from the same manufacturer
and of the same type. Always replace both batteries
at the same time.
Connecting the nano-USB receiver
♦ Remove any other mouse that is connected to your
computer and then restart the computer.
♦ Remove the nano-USB receiver 0from the storage
compartment 9on the bottom of the wireless
mouse.
♦ Connect the nano-USB receiver 0to a free USB-port
on your computer while it is running.

SFM 4 A1
■ 12│GB│IE│NI
The operating system recognises the new hardware
and automatically installs the necessary drivers. After
the installation of the driver, the wireless mouse is ready
for operation and can be used.
Power-saving mode
The wireless mouse is equipped with a power-saving mode.
■If you switch the computer off, the wireless mouse
automatically switches off after around 8 minutes
in order to save power.
■If you disconnect the nano-USB receiver 0from the
computer, the wireless mouse automatically switches
off after around 8 minutes in order to save power.
■If you do not click, scroll or move the wireless mouse,
it turns off after about 8 minutes. As soon as you
press any button on the wireless mouse or use the
scroll wheel, the wireless mouse switches back on.
Changing operating modes
You can use the DPI button 4to switch the optical sam-
pling between the resolutions 1000 dpi, 1500 dpi and
2000 dpi. The higher the resolution, the more accurate
the wireless mouse’s sampling.

SFM 4 A1
GB│IE│NI│13 ■
Installing the software
To be able to use the full functionality of the mouse, you
must install the supplied software.
NOTE
► The following illustrations and descriptions relate
to the operating system Microsoft®Windows®7.
The screen display may differ for other operating
systems.
♦ Insert the supplied software CD qin the CD-ROM
drive of your computer.
The installation process should start automatically.
♦ If this is not the case, start the “setup.exe” file on the
CD-ROM manually by double-clicking it.
The installation starts and the installation wizard is
displayed.

SFM 4 A1
■ 14│GB│IE│NI
The start window of the installation wizard will be displayed.
♦ Click on the “Next >” button.
♦ In the next step, you can choose the destination
folder for the installation by using the “Browse”
button or selecting the suggested destination.
♦ Move on to the next step by clicking on the
“Next >” button.

SFM 4 A1
GB│IE│NI│15 ■
♦ To finish the installation, click the “Finish” button.
The computer will be restarted.
Configuration of the mouse buttons
You can use the software to customise the mouse
functions according to your personal preferences.
♦ Double-click on this icon in the system tray
(bottom left of your screen, next to the clock) or click
on the icon with the right mouse button and select
“Mouse properties” from the context menu.

SFM 4 A1
■ 16│GB│IE│NI
The configuration menu for the mouse appears.
♦ Select the tab “Configuration of mouse button”.
Here you can set a function for each of the five
mouse buttons.
♦ Click on the drop-down menu for the corresponding
mouse button and select a function from the menu.
♦ To apply the changes, click on the “Apply” button
(the window remains open) or on “OK” (the window
closes).