Silvercrest SMLM 807 A1 User manual

V 1.23
English ...................................................................................................................... 2
Dansk .....................................................................................................................23
Deutsch...................................................................................................................44

Wireless Multimedia Laser Mouse SMLM 807 A1
2 - English
Contents
Introduction.............................................................................................................. 3
Intended Use ........................................................................................................... 3
Package Contents ................................................................................................... 4
Technical Data......................................................................................................... 4
System Requirements .......................................................................................... 5
Important Safety Instructions .................................................................................. 6
Operating Environment ...................................................................................... 7
Children and Persons with Disabilities............................................................... 8
Batteries ............................................................................................................... 8
R/F Interface ....................................................................................................... 8
Copyright............................................................................................................. 9
Storing When Not Using the Product................................................................ 9
Overview................................................................................................................10
Before Getting Started..........................................................................................11
Inserting the Battery ..........................................................................................11
Connecting the USB Nano Receiver ...............................................................13
Software Installation .........................................................................................14
Getting Started ......................................................................................................16
Toggling between Operating Modes .............................................................16
Configuration ....................................................................................................16
Maintenance / Cleaning......................................................................................18
Environmental Considerations and Recycling .....................................................18
Conformity Notice.................................................................................................19
Troubleshooting.....................................................................................................20
Warranty Information ...........................................................................................21

Wireless Multimedia Laser Mouse SMLM 807 A1
English - 3
Introduction
Thank you for purchasing this SilverCrest SMLM 807 A1 wireless multimedia
laser mouse. In addition to the 3 standard buttons, this wireless laser mouse is
equipped with five special buttons that enable access to frequently used
functions. The scroll wheel is a 4-way fast scroll wheel that enables both
vertical and horizontal scrolling. The fast scroll wheel also allows hyper-fast
scrolling. With the special CPI button (4) you can toggle between a resolution
of 800 cpi and 1600 cpi or between standard and media functionality. This
wireless laser mouse also features an automatic standby function. If the wireless
laser mouse is not used for a certain time it will power off. Press any button on
the wireless laser mouse to power it back on.
Intended Use
This wireless multimedia laser mouse, consisting of a wireless laser mouse and
USB nano receiver, is an IT device. The device may not be used outdoors or in
tropical climates. This product has not been designed for corporate or
commercial (e.g. office) applications. Use the product in domestic environments
for private applications only. This device fulfils all that relates to CE Conformity,
relevant norms and standards. Any modifications to the equipment other than
recommended changes by the manufacturer may result in these directives no
longer being met. The manufacturer is not liable for any damage or
interference caused by unauthorized modifications. Only use the accessories
recommended by the manufacturer. Any use other than that mentioned above
does not correspond to the intended use.
Please observe the regulations and laws in the country of use.

Wireless Multimedia Laser Mouse SMLM 807 A1
4 - English
Package Contents
Please check the completeness of package contents using the following list:
-Wireless Multimedia Laser Mouse SMLM 807 A1
-USB nano receiver (inserted into the wireless laser mouse)
-1 AA brand-name battery, 1.5V
-Driver CD
-User's Manual
If you find any items missing or damaged, please phone our hotline. You will
find the corresponding phone number in the last chapter “Warranty
Information”.
Technical Data
-Wireless multimedia laser mouse with USB nano receiver
-Laser Class 1
-8 buttons, 7 of which are programmable
-Tilt wheel for vertical and horizontal scrolling and hyper-fast scrolling
-Selectable resolution: 800 cpi or 1600 cpi
-Smart Link (no complicated connection process required for receiver and
wireless laser mouse)
-Radio frequency: 2.4 GHz
-Power supply: 1 AA battery, 1.5 V

Wireless Multimedia Laser Mouse SMLM 807 A1
English - 5
-Toggling between Media Player and Office Mode (standard operation)
by simple key operation
-Range: up to 5m
-Dimensions of wireless mouse:
125 mm x 82 mm x 40 mm (LxWxH)
-Dimensions of USB nano receiver:
15,5 mm x 7 mm x 18 mm (LxWxH)
-Weight of the wireless laser mouse: 115 g without battery / 138 g with
battery
-Weight of USB nano receiver: 2 g
System Requirements
-Intel®Pentium®III / AMD Athlon™ or higher
-1 free USB 2.0 port
-Microsoft®Windows®XP, Windows Vista®or Windows®7
-CD-ROM drive or DVD drive for installing the software

Wireless Multimedia Laser Mouse SMLM 807 A1
6 - English
Important Safety Instructions
Before you use this device for the first time, please read the following notes in
this manual and heed all warnings, even if you are familiar with handling
electronic devices. Keep this manual safe for future reference. If you sell the
device or pass it on, it is essential you hand over this manual also.
This icon denotes important information for the safe operation
of the product and for the user’s safety.
This icon alerts about a strong light source.
This symbol denotes further information on the topic.
Warning: Laser Radiation! Laser Class 1
Avoid damage to your eyes! Never look into the laser beam. Never point the
laser beam directly at people or animals!

Wireless Multimedia Laser Mouse SMLM 807 A1
English - 7
Operating Environment
Position the wireless laser mouse on a stable, flat surface and do not place any
objects on the device. The device is not for use in environments with a high
temperature or humidity (e.g. bathrooms), and must be kept free of dust.
Operating temperature and operating humidity: 5°C to 40°C, max. 90% RH.
Always make sure that:
-no direct heat sources (e.g. heating) can affect the device;
-no direct sunlight or artificial light reaches the device;
-contact with spray, dripping water and corrosive liquids must be avoided
and the device should never be operated near water, and it must
especially never be immersed (do not place any objects filled with liquids
such as vases or drinks near the device);
-the device is never placed in the immediate vicinity of magnetic fields (e.g.
loudspeakers);
-no fire sources (e.g. burning candles) are placed on or near the device;
-no foreign bodies are introduced into the device;
-the device should not be subject to any sharp temperature changes;
-the device is not subject to excessive shocks and vibrations;

Wireless Multimedia Laser Mouse SMLM 807 A1
8 - English
Children and Persons with Disabilities
Electrical appliances do not belong in the hands of children. Also people with
disabilities shall use electrical devices accordingly. Do not allow children or
persons with disabilities to use electrical devices when not under supervision.
These people may not comprehend the presence of potential risks. Batteries
and small parts represent potential choking hazards. Keep the batteries out of
reach. If a battery is swallowed, seek medical help immediately. Keep the
packaging away from children and persons with disabilities too. as there is
danger of suffocation.
Batteries
Insert the battery with the correct polarity. Never throw the battery into the fire.
Remove the battery if the device is not going to be used for a long time. Non-
intended use may cause explosion and danger to life.
R/F Interface
Please switch off the appliance in airplanes, hospitals, operating theatres and
in the vicinity of medical electronic system. The radio waves transmitted could
impair the functionality of sensitive appliances.
Observe a minimum distance of 20 cm between the appliance and any
pacemaker as the radio waves could impair the function of the pacemaker.
The transmitted radio waves may create interference noises in hearing aids.
Do not allow the appliance to be introduced in the vicinity of inflammable
gases or in environments subject to a risk of explosion (e.g. paint shops) as

Wireless Multimedia Laser Mouse SMLM 807 A1
English - 9
long as the radio component is switched on, because the transmitted radio
waves could trigger an explosion or fire.
The coverage/range of the radio waves varies depending on the surrounding
and environmental conditions.
In any data exchange via wireless connections, unauthorized third parties are
also able to receive the data. Targa GmbH is not liable for any radio or
television interference caused by unauthorized modifications of this appliance.
Targa furthermore accepts no liability for the replacement or exchange of
connection cables and appliances not specified by Targa GmbH. The user is
solely responsible for the elimination of interferences caused by such an
unauthorized modification, as well as for the replacement or exchange of the
appliances concerned.
Copyright
The entire content of this User’s Manual is copyrighted and is provided to the
reader for information purposes only.
Copying data and information without the prior written and explicit
authorization from the author is strictly forbidden. This also applies to any
commercial use of the contents and information.
All texts and figures are up-to-date as per the date of print release. We assume
no liability for any changes.
Storing When Not Using the Product
If the wireless laser mouse is going to be left unused for a long period of time,
remove the battery . Remove the USB nano receiver from your computer’s USB
port and insert it into the storage compartment of the wireless laser mouse. Also
make sure that the storage temperature is maintained between 5 °C and 40
°C. Humidity must not exceed 90% RH.

Wireless Multimedia Laser Mouse SMLM 807 A1
10 - English
Overview
1 Left mouse button
2 Right mouse button
3 Tilt wheel (4-way fast scroll wheel)
Volume control and mute (media mode)
4 800/1600 cpi toggle switch (press briefly)
Standard / media mode toggle switch
(keep pressed for 3 seconds)
5 Battery level indicator
6 Zoom - (default mode)
Play / Pause (media mode)
7 Zoom + (default mode)
Launch Media Player (media mode)
8 Back (default)
Previous title (media mode)
9 Forward (default)
Next title (media mode)

Wireless Multimedia Laser Mouse SMLM 807 A1
English - 11
Before Getting Started
Inserting the Battery
Insert the supplied battery into the wireless laser mouse.
10 Laser sensor
11 Inserted USB nano receiver
12 On/Off button
Open the battery compartment on the bottom of the wireless laser mouse.
Insert the supplied battery (size AA) into the wireless laser mouse with the
correct polarity (+ and -); see the illustration.
Remove the USB nano receiver.
Close the battery compartment.

Wireless Multimedia Laser Mouse SMLM 807 A1
12 - English
Press the On/Off button (12) on the bottom of the wireless laser mouse to
power it on.
If the indicator light (5) on the upper side of the wireless laser
mouse lights up orange, the battery is depleted. When this
happens, replace the battery with a new battery of the same
type.
Should the wireless laser mouse fail to work, power it off and
back on. Sometimes removing and re-inserting the battery will
also help.
After inserting a rechargeable battery into the wireless laser
mouse or after powering the wireless laser mouse on, the
indicator (5) will flash several times during automatic
synchronisation with the receiver. When the synchronisation is
completed, the status indicator will stop lighting.

Wireless Multimedia Laser Mouse SMLM 807 A1
English - 13
Connecting the USB Nano Receiver
If your previous mouse is still connected to the computer, please shut down the
computer, disconnect the appliance and then restart the computer.
Connect the USB Nano Receiver (12) to a free USB port of your running
computer.
The operating system will automatically recognize the new hardware and
install the required drivers. Depending on the operating system installed, the
following screen messages may appear:
Windows®XP
When the receiver is connected for the first time, the operating system
displays the message „New hardware detected“. Wait until the message
„The new hardware has been installed and is now ready for use“ is
displayed before using your wireless laser mouse.
Windows Vista®, Windows®7
When the receiver is connected for the first time, the operating system
displays the message „Installation of appliance driver software“. Wait until
the message „The appliances are ready for use now“ appears. The wireless
laser mouse is now operational and ready to be used.

Wireless Multimedia Laser Mouse SMLM 807 A1
14 - English
Software Installation
If you would like to use all of the functions of your wireless laser mouse you
need to install the software included. Insert the included CD-ROM in the CD-
ROM drive of your computer. The installation process should start
automatically, failing that, start the CD-ROM file "setup.exe" manually by
double-clicking it.
Only with the operating system Windows®7, Windows Vista®will the
installation initially be stopped by the user account control function with the
message: „An unidentified program is attempting to access the computer”.
Click on „OK“ to continue with the installation.
The following installation illustrations correspond to the operating system
Windows®7. The windows shown in the operating systems Windows®
XP/Vista are slightly different, but their content is the same.
Click on
Next to start the
installation.

Wireless Multimedia Laser Mouse SMLM 807 A1
English - 15
Here you can select the target file for
the installation via the
Change button
or use the suggested file. Click on
Next
to proceed with the installation.
Click
Finish to finish the setup
programme.
If you are prompted to restart your computer, restart it before
using the software.

Wireless Multimedia Laser Mouse SMLM 807 A1
16 - English
Getting Started
Toggling between Operating Modes
The
CPI button (4) puts you in a position to toggle between the optical scan
resolutions of 800 cpi und 1600 cpi. The scanning is more precise at 1600 cpi
and the mouse cursor will move faster given the same movements.
If you would like to toggle between standard operation and media operation,
press the
CPI button (4) and keep it pressed for a minimum of 3 seconds until
the power control lamp (5) briefly lights up.
When switching to 1600 cpi resolution, the control light (5) will blink fast.
When switching to 800 cpi resolution, the control light will blink slowly.
Please see the list on page 10 for information on the functions available in the
media operation mode.
Configuration
Double-click on the icon in the task bar (lower-right corner on your screen,
near the system clock). Or right-click on the icon and select “Open” from the
context menu. The mouse configuration menu will appear.

Wireless Multimedia Laser Mouse SMLM 807 A1
English - 17
Here you can specify functions for
selected mouse buttons. Simply click on
the selection switch next to the
corresponding mouse button and select
a function from the menu by clicking on
it with the left mouse button.
You can restore the mouse to its
original state by clicking on the
„Restore to default“ button.
All selected options apply to the default mode. The button
assignments for media mode cannot be modified.
If you would like to apply your changes, please click on the „
Apply “ button
(the window will still stay open) or the „
OK “ button (the window will close).
Tip for users of Microsoft
®
Windows
®
7, Windows Vista
®
(Windows
®
XP does
not include this function):
You can also adjust the horizontal scrolling of the tilt wheel in the system
control of the operating system in the submenu „Mouse“. The configuration
menu of the mouse driver needs to be closed in order to access the system
control menu.

Wireless Multimedia Laser Mouse SMLM 807 A1
18 - English
Maintenance / Cleaning
Repairs are required when this device has been damaged in any way, for
example, when liquid has entered the product, when the product has been
exposed to rain or moisture, when the product does not work normally or if the
product has been dropped. If smoke, unusual noises or smells are noticed,
power off the device immediately. In this case the device should not be used
further and should be inspected by authorized service personnel. Please
contact qualified personnel when repair is needed. Never open the housing of
the device, or the accessories. Only use a clean, dry cloth for cleaning. Never
use any corrosive liquids.
Environmental Considerations and Recycling
Devices marked with this symbol are subject to the European
Directive 2002/96/EC. All electric and electronic devices must
be disposed of separately from household waste at established
bodies. The USB nano receiver is also an electronics device
and must be properly disposed of.
Avoid hazards to the environment and dangers to your personal health by
disposing of the device properly. For further information about proper disposal,
contact your local government, disposal bodies or the shop where you bought
the device.
Respect the environment. Old batteries do not belong in with domestic waste.
They must be handed in to a collection point for old batteries. Please note that
batteries must be disposed of fully discharged at appropriate collection points
for old batteries. If disposing of batteries which are not fully discharged, take
precautions to prevent short circuits.