Silvercrest SFMT 2.4 A1 Product information sheet

V 2.2
English.................................................................................2
Dansk................................................................................25
Français.............................................................................49
Nederlands .......................................................................77
Deutsch ...........................................................................101

SilverCrest SFMT 2.4 A1
2 - English
Table of Contents
1. Intended use ......................................................................3
2. Package contents...............................................................4
3. Controls and displays.........................................................5
4. Technical specifications ......................................................6
4.1 System requirements................................................................................7
5. Safety instructions .............................................................7
6. Before you start ...............................................................11
6.1 Inserting the batteries............................................................................ 11
6.2 Connecting the USB nano receiver ..................................................... 12
6.3 Installing the software........................................................................... 13
6.4 Icon in the system tray .......................................................................... 14
7. Getting started.................................................................15
7.1 Switching the operating mode............................................................. 15
7.2 Configuring the wireless mouse using the mouse software ............... 16
8. After use ..........................................................................20
8.1 Storage when not in use....................................................................... 20
9. Troubleshooting...............................................................20
10. Environmental regulations and disposal information.....21
11. Conformity notes ...........................................................22
12. Warranty and service information.................................22
Service .......................................................................................................... 23
Manufacturer................................................................................................ 23

SilverCrest SFMT 2.4 A1
English - 3
Congratulations!
By purchasing the SilverCrest SFMT 2.4 A1 wireless mouse, hereinafter
referred to as the wireless mouse, you have opted for a quality product.
Before first using it, familiarise yourself with the way the wireless mouse
works and read these operating instructions through carefully. Be careful to
follow the safety instructions and only use the wireless mouse as described
in the operating instructions and for the applications given.
Keep these operating instructions in a safe place. If you pass the wireless
mouse on to someone else, make sure to give them all the relevant
documents with it.
Trademarks
Microsoft Windows is a registered trademark of Microsoft Corporation,
USA.
Intel and Pentium are registered trademarks of Intel Corporation, USA.
AMD®and AMD Athlon are registered trademarks of Advanced Micro
Devices, Inc.
USB is a registered trademark.
Other names and products may be the trademarks or registered trademarks
of their respective owners.
1. Intended use
This wireless mouse, consisting of a wireless mouse and wireless receiver, is
an IT device. It has been designed for data input and for controlling a
computer. The product should only be used in dry areas. This product has
not been designed for corporate or commercial applications. Use the
product in domestic environments for private applications only. Any use
other than that mentioned above does not correspond to the intended use.
This wireless mouse can only be used with the right hand.

SilverCrest SFMT 2.4 A1
4 - English
This wireless mouse fulfils all that relates to CE Conformity, relevant norms
and standards. Any modifications to the device other than recommended
changes by the manufacturer may result in these standards no longer being
met. The manufacturer shall not be liable for any damage or malfunctions
resulting from such modifications. Only use accessories recommended by
the manufacturer.
You must observe the regulations and laws in the country of use.
2. Package contents
Remove the wireless mouse and all accessories from the packaging. Remove
the packaging material and check that all components are complete and
undamaged. Keep the packaging material away from children and dispose
of appropriately. If you find anything missing or damaged, please contact
the manufacturer.
A SilverCrest SFMT 2.4 A1 wireless mouse
B USB nano receiver
(inserted into the wireless mouse)

SilverCrest SFMT 2.4 A1
English - 5
C 2 AAA-type batteries, 1.5V (Micro) for the wireless mouse
D User manual (lineart illustration)
E CD-ROM with software (lineart illustration)
F Quick Start Guide
3. Controls and displays
These operating instructions have a fold-out cover. On the inside of the
cover, the wireless mouse is shown with figures indicated. The meanings of
the numbers are as follows:
1 Left mouse button
2 Right mouse button
3 Indicator light
flashing continuously = batteries empty
one long flash = default operating mode
several short flashes = media mode
one short flash = resolution CPI1
two short flashes = resolution CPI2
three short flashes = resolution CPI3
4 Scroll wheel and middle mouse button
Volume adjustment and mute (media mode)
5 Switch resolution CPI1/CPI2/CPI3 (short press)
Default/Media mode toggle switch
(keep pressed for approx. 5 seconds)

SilverCrest SFMT 2.4 A1
6 - English
6 Back (default mode)
Previous title (media mode)
Launch Media Player (media mode)
Playback / Pause (media mode)
7 Next (default mode)
Next title (media mode)
8 On/off button of the wireless mouse
9 Optical sensor
10 Battery compartment
You can use the mouse software provided to program the functions of the
mouse buttons (1, 2, 4, 5, 6 and 7) and amend the default assignment
described above. See also “Configuring the wireless mouse using the mouse
software” on page 16.
4. Technical specifications
General technical data
Wireless transmission frequency: 2.4 GHz
Transmission power: max. 10mW
Synchronisation: SmartLink technology (no longer any need to establish
connections between the receiver and mouse manually)
Range: up to 5 m
Operating temperature, humidity: 5 to 40 °C, max. 90 % relative humidity
Storage temperature, humidity: 5 to 40 °C, max. 90 % relative humidity

SilverCrest SFMT 2.4 A1
English - 7
Wireless Mouse
Tracking: optical sensor with 800 cpi, 1600 cpi and 2400 cpi, LED Class 1
Mouse buttons: 6 buttons, all buttons programmable
Scroll wheel
Dimensions: 12.3 x 6.2 x 6.9 cm (L X W x H)
Weight: 90 g (without batteries)
Power supply: 2 batteries type AAA, 1.5 V (Micro)
USB nano receiver
Standard: USB 2.0
Dimensions: 1.8 x 1.5 x 0.7 cm (L x W x H)
Weight: 2 g
Power supply: via USB connection
The technical data and design may be changed without prior notice.
4.1 System requirements
Intel®Pentium®III / AMD Athlon™ or higher
1 free USB port
Microsoft®Windows®7/8/10
CD-ROM or DVD-ROM drive for installing the software
5. Safety instructions
Before you use the wireless mouse for the first time, please read the
following notes and heed all warnings, even if you are familiar with
handling electronic devices. Keep this manual safe for future reference. If
you sell the device or pass it on, it is essential that you also hand over this
manual, as it is part of the product.

SilverCrest SFMT 2.4 A1
8 - English
Explanation of symbols used
DANGER! This symbol and the word “Danger” alert you to
a potentially dangerous situation. Ignoring it can lead to
severe injury or even death.
WARNING! This symbol and the word “Warning” denote
important information required for the safe operation of the
product and for the safety of its users.
This symbol alerts about a strong light source.
This symbol denotes further information on the topic.
Avoid damage to your eyes! Never look into the light beam,
not even by using optical devices and tools.
DANGER! Children and persons with disabilities
Electrical devices are not suitable for children. Also persons with reduced
physical, sensory or mental capabilities should only use electrical devices in
appropriate circumstances. Never allow children or persons with disabilities
to use electrical devices unsupervised, unless they are instructed accordingly
and supervised by a competent person responsible for their safety. Children
should always be supervised to ensure that they do not play with the
product. Small parts can be fatal if swallowed. The packaging
material is no toy! Keep the packaging away from children
and persons with disabilities.
DANGER! There is a risk of suffocation.

SilverCrest SFMT 2.4 A1
English - 9
DANGER! Batteries
Insert the batteries with the correct polarity. Never try to recharge the
batteries and under no circumstances throw them into fire. Do not mix
battery types (old and new or carbon and alkaline, etc.). Batteries are not
toys! If a battery is swallowed, seek medical help immediately. Batteries
must never be opened or deformed. Otherwise there is a risk of leaking
chemicals. If the chemicals come into contact with your skin or eyes, rinse
with plenty of fresh water immediately and seek medical aid. Remove the
batteries when the device is not to be used for an extended period.
Improper use could cause explosions or leaks.
DANGER! Radio interface
Turn the device off when on board an aircraft, in a hospital, in an operating
theatre or in the vicinity of electronic medical equipment. The RF signals may
interfere with the functionality of sensitive devices. Keep the device at least
20 cm (8 inches) away from pacemakers, as the RF signals could interfere
with the functionality of the pacemaker. The RF signals transmitted can
interfere with hearing aids. If wireless mode is switched on, do not place the
device near flammable gases or in a potentially explosive area (e.g. a paint
shop), as the RF signals transmitted could cause explosions or fire. The
range of the radio frequency signals depends on environmental conditions.
If data is transmitted via a wireless connection, it can also be received by
unauthorised parties. Targa GmbH is not liable for any interference caused
to RF or TV signals through unauthorised modification to this device.
Furthermore, Targa accepts no liability for replacing any devices that have
not been specifically approved by Targa GmbH. The user is solely
responsible and liable for remedying any interference caused by such
unauthorised modification of this device and for replacing devices.

SilverCrest SFMT 2.4 A1
10 - English
WARNING! Maintenance/cleaning
Repairs are required when this device has been damaged in any way, for
example when liquid has entered the product, when the product has been
exposed to rain or moisture, when the product does not work normally or if
the product has been dropped. If smoke, unusual noises or smells are
noticed, power off the device immediately and remove the batteries. If this
occurs, do not continue to use the device and have it checked out by an
expert. All repair work must be carried out by qualified personnel. Never
open the housing of the device, or the accessories. Only use a clean, dry
cloth for cleaning. Never use aggressive liquids.
WARNING! Make sure that:
- the device is not exposed to direct heat sources (e.g. radiators)
- no direct sunlight or bright artificial light reaches the device
- contact with water sprays or drops and corrosive liquids is avoided and
the device is never operated near water; in particular the device may
never be immersed in liquids (do not place any objects containing
liquids, such as vases or drinks, on or near the device)
- the device is never placed near magnetic fields (e.g. speakers)
- no naked flames (e.g. burning candles) are placed on or near the device
- no foreign bodies can penetrate into the device
- the device is not exposed to any extreme temperature fluctuations as this
can cause moisture through condensation and cause short-circuits. If the
device has been exposed to strong temperature variations, wait for it to
reach the ambient temperature before switching it on (about 2 hours).
- the device should not be subjected to excessive shocks and vibrations
Operating environment
Position the device on a stable, flat surface and do not place any objects on
the device. The device is not designed for use in environments with high

SilverCrest SFMT 2.4 A1
English - 11
temperatures or humidity (e.g. bathrooms) or those with above-average
levels of dust. Operating temperature and operating humidity: 5°C to
40°C, max. 90% relative humidity.
Copyright
All the contents of these operating instructions are protected by copyright
and provided to the reader for information only. Copying data and
information without the prior explicit written consent of the author is strictly
forbidden. This also applies to any commercial use of the contents and
information. All texts and diagrams are up-to-date as of the date of printing.
Subject to change without notice.
6. Before you start
Unpack all the devices and use the package contents checklist on page 4 to
verify that you have received all items listed. Next remove all package
material. If you find anything missing or damaged, contact Customer
Service.
6.1 Inserting the batteries
1. Open the battery compartment cover.
2. Insert the batteries into the wireless mouse, as shown in the figure below.
Take care to observe the correct polarity (note + and -).

SilverCrest SFMT 2.4 A1
12 - English
3. Close the battery compartment cover properly.
4. Use the On/Off button (8) to power the wireless mouse on. The status
indicator (3) then lights up.
If the status indicator (3) flashes, the batteries are empty. When this
happens, replace the batteries with new batteries of the same type.
The wireless mouse has an automatic standby function. When
not using the wireless mouse for about 8 minutes, it will power
off. Move the wireless mouse or press any mouse button to
power it back on (the driver software must be installed).
If you do not plan on using the wireless mouse for an extended
period, we recommend switching it off by sliding the On/Off
switch (8) to the “Off” position.
6.2 Connecting the USB nano receiver
1. If you still have your old mouse connected to the computer, shut down
your computer, disconnect the device from your PC and restart the
computer.
2. Switch the wireless mouse on by sliding the On/Off switch (8) to the
"On" position.
3. Plug the USB nano receiver into a free USB port on your powered-on
computer. This is stored in the wireless mouse battery compartment
(10).
The operating system detects the new hardware and automatically installs
the corresponding drivers. Depending on the operating system, one of the
following messages appears:
Under Windows®8 and Windows®10
When connecting the receiver for the first time, the installation process
runs in background and no message is displayed.
For Windows®7
When connecting the receiver for the first time, the operating system
displays "Installing device driver software". Wait until the message "Your

SilverCrest SFMT 2.4 A1
English - 13
devices are ready to use" appears. Your mouse has been successfully
installed and can now be used.
If the connection to the nano receiver is interrupted or if it is not
possible to establish a connection, remove the batteries from the
wireless mouse and re-insert them.
6.3 Installing the software
In order to be able to use the full functionality of your mouse, you must
install the software supplied. To do this, insert the CD-ROM supplied into the
DVD drive of your computer. The setup process should start automatically,
otherwise double-click on the EXE file on the CD-ROM to start manually.
The setup process is temporarily blocked and a message "Do you want to
allow the following program from an unknown publisher to make changes to
this computer?" appears. To continue setup, click "Yes".
The following setup screens correspond to the Windows®8 operating
system. For Windows®10 and Windows® 7, these screens vary slightly but
their contents are the same.
1. Select the desired installation language and click “OK”.
2. Click "Next" to
continue.

SilverCrest SFMT 2.4 A1
14 - English
3. Click "Install“ to
start the installation.
4. To complete setup,
click on “Finish”.
If you are prompted to restart your computer, restart it before
using the software.
6.4 Icon in the system tray
After installation, there is a mouse icon on the task bar which you can
use to open the mouse software and configure the wireless mouse. Double-
clicking on this icon opens the configuration menu for the wireless mouse
(see page 16, “Configuring the wireless mouse using the mouse software”).

SilverCrest SFMT 2.4 A1
English - 15
You can also right-click on the icon and then select “Control Panel” to
access the configuration menu.
The operating system’s default settings hide disabled icons in
the task bar. It is recommended that the “Hide inactive icons”
option in task bar properties is disabled.
7. Getting started
Once you have connected the mouse and installed the mouse software as
described in the chapter above, you can use it as follows. Please note that
the description below is of the buttons in their default assignment. You can
program the function of all buttons individually. So, for example, you can
assign the fire function for a computer game to the CPI button (5). This
would then no longer be available for switching the resolution.
7.1 Switching the operating mode
7.1.1 Default mode
In default mode, the wireless mouse is essentially not different from other
mice. The conventional functions for clicking and scrolling are available.
7.1.2 Media mode
In media mode, you can control the playback of multimedia files (audio and
video). This includes functions such as playback/pause, next or previous
track, adjust volume, etc.
To toggle between default and media operating mode of your wireless
mouse, press and hold the CPI button (5) for at least 5 seconds until the
indicator (3) flashes up several times briefly. The available functions for
media mode can be found on page 5 in the section on “Controls and
displays”. In media mode, you can adjust the volume using the scroll wheel
(4) or press it downwards to mute or resume the sound output.
To toggle back from media to default operating mode of your wireless
mouse, press and hold the CPI button (5) for at least 5 seconds until the

SilverCrest SFMT 2.4 A1
16 - English
indicator (3) flashes up once for a longer time. While in default mode, the
Windows audio volume can still be adjusted by turning the scroll wheel (4),
as long as the volume control window has been enabled from the system
tray.
7.1.3 Setting the resolution
Press the CPI button (5) briefly to quickly toggle between 800 cpi, 1600 cpi
and 2400 cpi resolution for optical tracking. At 2400 cpi, tracking is more
accurate and the movement of the mouse cursor on the screen is faster. After
you press the CPI button (5), the indicator light (3) shows the currently
selected resolution.
Indicator light (3) Resolution
Flashing once 800 cpi
Flashing twice 1600 cpi
Flashing three times 2400 cpi
7.2 Configuring the wireless mouse using the mouse software
Double-click on the icon in the task bar (bottom right corner of your
screen, near the system clock) or on the desktop. Or right-click on the
icon and select "Control panel" from the dialog box that opens. The
configuration menu for the wireless mouse appears. You can set the
language you want in the top right-hand corner of the menu.

SilverCrest SFMT 2.4 A1
English - 17
The configuration menu has three tabs: “Button assign”, “Sensitivity” and
“Support”. The options available on the tabs are explained below.
7.2.1 “Button assign” tab
Click on one of the button names shown (e.g. “Back”) to assign a different
function to the button in question. You can also click on 1 to 6 in the list to
the right to assign a different function to the button in question.
Once you have left-clicked to select the button you want, a selection menu
of the available functions appears. Click on the function you want and the
then on “Apply” in the bottom right-hand corner to assign the new function
to the button for the current mouse profile.
By using the "Restore to default" button you can return the current profile
settings to their factory default values.
All selected options apply to the default mode. The button
assignments for media mode cannot be modified.

SilverCrest SFMT 2.4 A1
18 - English
You can only change the assignment of the left mouse button if
you have already assigned the “Left click” function to a
different button.
7.2.2 “Sensitivity” tab
Option Description
CPI1, CPI2 and CPI3 These are the settings for the optical
resolution of the wireless mouse which
you can switch using the CPI button
(5).
Acceleration Use this option to set the speed of the
mouse cursor on the screen.
To achieve more accuracy (e.g. for
image editing applications), check the
“Accuracy Increasing” box.