
8 GB/IE
QGetting started
1. Open the battery compartment 8on the back
of the product by pushing the clip of the battery
compartment cover 9towards the battery
compartment 8and lift the cover off.
2. Remove the isolating strip. This is located
between the battery and the battery compart-
ment 8.
3. Replace the battery compartment cover 9on
the battery compartment 8. Make sure that
the two extensions on the battery compartment
cover 9engage in the two openings in the
battery compartment 8. Press the battery
compartment cover 9onto the battery com-
partment 8until it noticeably and audibly
clicks into place.
QReplacing battery
1. Open the battery compartment 8as described
above.
2. Remove the used battery from the battery com-
partment 8by gently pulling the plastic grip
10 outwards. Make sure that you do not exert
too much pressure on the plastic grip 10 or it
may otherwise be damaged.
Remove the battery from the battery compart-
ment 8.
3. Insert the new battery. Make sure that the polarity
is correct. The “+“ must be pointing upwards and
the battery is held in the battery compartment
8.
4. Close the battery compartment 8as described
above.
QWeighing
NOTE: The kitchen scale 2always starts at
0g/0.0 oz (the temperature will also be shown)
when you switch it on. If you place the weighing
bowl 1on the kitchen scale 2before switching
it on, 0g/0.0 oz “Zero“ is displayed.
However, if you place the weighing bowl 1on
the kitchen scale 2after you have switched it on,
the scale will indicate the weight of the weighing
bowl 1. Press the zero button 7to reset the dis-
play to 0g/ 0.0 oz.
jPlace the weighing bowl 1on the kitchen
scale 2.
jPress the ON/OFF button 3to switch the
kitchen scale 2on.
jSelect the unit of weight by pressing the Unit
button 6. You can choose between “g/kg“
and “oz/lb“.
jPlace the food you wish to weigh in the bowl.
jThe LCD readout 5indicates the weight of the
food in the selected unit of weight.
NOTE: The scale operates almost exactly the
same way without the bowl 1. To operate without
bowl, simply follow & repeat the same steps as
above except starting without the bowl 1.
Q Weigh and add
The kitchen scale 2allows you to weigh foods
consecutively without removing food already in the
weighing bowl 1.
jPlace the weighing bowl 1on the kitchen
scale 2.
jPress the ON/OFF button 3to switch the
kitchen scale 2on.
jSelect the unit of weight by pressing the Unit
button 6. You can choose between “g/kg“
and “oz/lb“.
jPlace the food you wish to weigh in the bowl.
jThe LCD readout 5indicates the weight of the
food in the selected unit of weight.
jNow press the zero button 7. The scale now
reads “TARE“.
jNow place more food in the weighing bowl 1.
jThe LCD readout 5indicates the weight of the
food you have added in the selected unit of weight.
jContinue in this way only until the maximum
capacity of the kitchen scale 2is reached or
the weighing bowl 1is full.
103519_silv_Kuechenwaage_Content_IE_DK_BE_NL.indd 8 18.08.14 14:40