Silvercrest RT2000 BT User manual

Programmable radiator thermostat
bluetooth
rt2000 bt
Operating manual
Manufacturer
Olympia Business Systems Vertriebs GmbH
Zum Kraftwerk 1
45527 Hattingen
GERMANY
www.olympia-vertrieb.de
Information Status
10/2017 - Ident. No.: 102017-2
Giu
Before starting to read the information, fold out the page con-
taining the illustrations and then familiarise yourself with all the
functions provided by the device.
Giu Operating Manual
Giu
IAN 291540IAN 291540

OK
Menu Time
7
8 a - d
2
3
4 a
5
9
6
1
4 b
4 c
4
12
3
Giu
Scope of Delivery
1 Radiator thermostat, Bluetooth RT2000 BT
3 Adapters (Danfoss RA, Danfoss RAV, Danfoss RAVL)
1 Plunger extension
2 Batteries (mignon, AA), 1.5 V
1 Operating manual
1 Union nut
2 Heating times
3 AUTO or MANU mode
4a Time button – timer function
4b Menu button – changes to main menu (starting from the
standard display); within the menu, press this button to
go back one menu level
4c
OK button – confi rms settings
5 Adjusting wheel
6 Child safety lock
7 Battery symbol
8a Holiday function
8b Comfort temperature
8c Energy-save temperature
8d Frost protection function
9 Battery compartment
10 Fixing element
11 Maximum value, radiator
12 Thermostat head
13 Groove
14 Adapter
15 Plunger extension
10
11
12 13
14
15
1314
13
14

5

Contents
Introduction........................................ 8
Intended Use ...................................... 8
Safety Instructions.............................. 9
Operating and Display Elements....... 12
Menu................................................ 14
Inserting the Batteries ...................... 16
Installation ....................................... 17
Disassembling the Old Thermostat Head .................. 18
Installing the New Thermostat Head.......................... 19
Disassembly ..................................... 22
Operation on the device ................... 23
Automatic Mode ......................................................... 23
Setting Comfort and Energy-Save Times.................... 25
Setting an Individual Programme ............................... 26
Setting Comfort and Energy-Save Temperatures....... 27
Manual Mode............................................................. 28
Setting the Date and Time .......................................... 29
Timer Function.............................................................. 30
Off set ........................................................................... 31

6

Window Function ........................................................ 32
Holiday Function ......................................................... 33
Child Safety Lock (Button Lock).................................. 34
Heating Pause ............................................................. 35
Summertime/Wintertime ............................................ 35
Version Number ......................................................... 36
Resetting to Factory Default........................................ 36
Standby........................................................................ 37
Frost Protection Function.............................................. 37
Calcifi cation Protection Function ................................ 37
Operation via App............................ 38
Start page.................................................................... 39
Creating a room.......................................................... 40
Adding a device.......................................................... 41
Overview of room menu............................................. 42
Overview of device menu........................................... 44
Setting Comfort and Energy-Save Temperatures....... 46
Window Function ........................................................ 47
Holiday Function ......................................................... 48
Child Safety Lock ........................................................ 49
Four Heating Periods per Day.................................... 50
Individual Heating Times ........................................... 51
Setting Comfort and Energy-Save Times.................... 52

7

Saving settings............................................................. 53
Alter room temperature............................................... 54
Re-naming rooms......................................................... 55
Deleting rooms ............................................................ 56
Re-name devices.......................................................... 57
Deleting devices .......................................................... 58
Setting a PIN ............................................................... 59
Troubleshooting ............................... 60
Technical Data ................................. 62
Cleaning ........................................... 63
Disposal ........................................... 63
Guarantee........................................ 64
Manufacturer ................................... 66
Legal Notice ..................................... 66
Declaration of Conformity ................ 67

8

Introduction
Read this instruction manual and the safety
instructions carefully. Only use the device as
described and for the purpose for which it
was intended. Keep this operating instruction
manual in a safe place. Hand over all the documents
with the device if it is transferred to third parties.
Intended Use
The programmable radiator thermostat RT2000 BT
- subsequently referred to as the "device" - is used to
regulate any common radiator valve.
The device can be used for time regulation of the
room temperature. The device adjusts a radiator valve
to control the heat fl ow to the radiator. The device fi ts
on all common radiator valves and is easy to install.

9

The device may only be operated indoors. Any use
other than that described in this operating manual is
considered unintended use and results in loss of rights
related to the terms of guarantee and exemption of
liability. This also applies to any reconstruction and
modifi cation. The device is exclusively intended for
private use.
Safety Instructions
Avoid potential dangers by reading the
following safety instructions carefully.
Warning! Risk of fatal injury and acci-
dents to infants and children! The pack-
aging material represents a risk of suff o-
cation. Never leave children unattended
when the packaging material is nearby.
Children often underestimate the risks in-
volved. Always keep children away from
the packaging material. The device is not
a toy.

10

Attention! This device can be used by
children from the age of 8 and persons
with restricted physical, sensory or men-
tal capabilities or a lack of experience
and knowledge under supervision or if
they have been instructed in safe use of
the device and understand the resulting
dangers. Children must not play with the
device. The device must not be cleaned
or serviced by children without appropri-
ate supervision.
Important! Do not open the device; it
does not contain any parts which can be
serviced by the user. In the event of any
faults, send the device to the Service De-
partment.

11

Important! Never attempt to recharge
non-rechargeable batteries and do not
short circuit or open them. This could
result in the risk of overheating, fi re or
bursting. Never throw batteries in a fi re
or water. The batteries could explode.
Important! Leaking batteries could
damage the device. Be particularly care-
ful when handling damaged or leaking
batteries and wear protective gloves.
Switch the device off and remove the
batteries if the device will not be used for
a longer period.

12

Operating and Display
Elements
OK
Menu Time
7
8 a - d
2
3
4 a
5
9
6
1
4 b
4 c

13

1Union nut
2Heating times
3 Automatic (AUTO) mode or
manual (MANU) mode
4a button – timer function
4b 4b button – changes to main menu (starting
from the standard display); within the menu, pressing
this button goes back one menu level
4c button – confi rms the settings
5Adjusting wheel
6 Child safety lock
7Battery icon
8a Vacation function
8b Comfort temperature
8c Energy-save temperature
8d Frost protection function
9Battery compartment

14

Menu
Use the Menu button to open the menu.
Turn the adjusting wheel to select the function you
want.
Press the OK button to access the function settings.
Use the adjusting wheel to change the settings avail-
able.
Use the OK button to confi rm your settings.
Use the Menu button to go back to the standard dis-
play.

15

Function Explanation
  
AUTO = automatic mode
MANU = manual mode

Timer programme

Comfort and energy-save temperature

Date and time

Window function

(Reset) Reset the default factory set-
tings
  
Adapt to the radiator valve

Holiday function

Installation function

Adjust temperature to local conditions
or subjective temperature perception

Standby mode

Version number

16

Inserting the Batteries
1. Remove the battery compartment cover.
Only use batteries of the type specifi ed in the Section
"Technical Data" to operate the device. Do not use re-
chargeable batteries to operate the device.
2. Insert the batteries (2 x mignon, AA) in the bat-
tery compartment paying attention to correct po-
larity.
The display shows .
Attention! Risk of damage to the de-
vice through reverse poling when insert-
ing the batteries. Pay attention the batter-
ies are correctly aligned when inserted.
3. Replace the battery compartment cover.
The service life of new batteries is approx. 1 year.
The battery icon is displayed when the batteries
need to be changed.
The service life of the battery is infl uenced by the type
of programming (frequency of switching times, etc.).

17

Installation
Caution! Risk of burns through hot radi-
ator valve! Contact could lead to hands
being burned. Allow the radiator to cool
down before completing any installation,
disassembly or repair work on the de-
vice! Wear work gloves!
Installation of the device is easy. It is not necessary to
drain the heating water or alter the heating system. It
is not necessary to use any special tools or switch off
the heating system.
15

18

The union nut (15) permanently attached to the de-
vice fi ts on all radiator valves with thread size M30
x 1.5 mm of the most common manufacturers, e.g.
Heimeier, MNG, Junkers, Landis&Gyr (Duodyr), Hon-
eywell-Braukmann, Oventrop type A, Oventrop AV6,
Schlösser, Comap D805, Valf, Sanayii, Mertik Max-
itrol, Watts, Wingenroth (Wirofl ex) R.B.M, Tiemme,
Jaga, Siemens, Idmar.
The adapters contained in the supply package ena-
ble the device to be fi tted to Danfoss RA-, Danfoss
RAV and Danfoss RAVL radiator valves.
Disassembling the Old Thermostat Head
1. Set the thermostat head (11) to the temperature
range  (or position 5).
This means the thermostat head is no longer pressing
on the spindle of the radiator valve and can be re-
moved more easily.
2. Unscrew the fi xing element (9) of the thermostat
head and remove the thermostat head.

19

Installing the New Thermostat Head
To fi t the device to Danfoss radiator valves, you need
the adapter provided. To determine which adapter
(13) fi ts which radiator valve, please refer to Fig. 2 on
the fold-out page.
Caution! During assembly, be care-
ful not to jam your fi ngers between the
halves of the adapter!
Caution! The adapters supplied
are joined together with plastic tabs.
Snapped off edges can be sharp.
Break out the plastic tabs carefully
and smoothen the sharp edges on the
adapter you use with a suitable tool.

20

The notches (12) on the circumference ensure the
adapter fi ts perfectly.
1. If required, slip the adapter (13) that fi ts the radi-
ator valve onto the valve until the adapter snaps
into place.
If necessary, use a screwdriver to slightly prise open
the adapter in the area of the screw.
2. Fix the corresponding adapter with the screw and
nut supplied (see Fig. 2 and Fig. 3 on the fold-out
page).
In the case of the RAV valve, the plunger extension
(14) must also be mounted on the valve pin (see Fig.
2 on the fold-out page).
3. Screw the device with the aid of the union nut
(15) onto the fi tted adapter or directly onto the
radiator valve.
4. The adaptation starts automatically.

21

The device adjusts to the stroke of your radiator valve.
For this purpose, the radiator valve is opened and
closed several times so that the device learns the end
points. This process may take a few minutes under
certain circumstances.
Due to the continuous thread, the
pressure piece fi tted on the underside
can drop out if the regulator has not
been mounted on the valve. Fit the
pressure piece back in place in such
cases. The continuous thread turns and tightens the
pressure piece. Restart the adaptation, if necessary.
After successful adaptation, the device goes into Au-
tomatic mode.

22

Disassembly
Caution! Risk of burns through hot radi-
ator valve! Contact could lead to hands
being burned. Allow the radiator to cool
down before completing any installation,
disassembly or repair work on the de-
vice! Wear work gloves!
1. Turn the adjusting wheel (4) to the right beyond
the maximum temperature of 28 °C until 
appears on the display.
2. Wait a few seconds until the radiator valve is fully
open.
3. Turn the union nut clockwise to release from the
radiator valve.