SilverStar ECLIPSE 1000 RGBAL User manual

SS847
www.yajiang.cn
Professional LightingProfessional Lighting
SILVER STARSILVER STAR
RD-SS807-SM-01(SS-I)
MODELS:SS847XAL
ECLIPSE 1000 RGBAL

1
Voltage:AC100~240V 50/60Hz
Max Power:300W
Size:600 370 370mm
Weight:8.3kg(without lens tube)
1 PRODUCT SPECIFICATIONS1 PRODUCT SPECIFICATIONS
1.1 PRODUCT SPECIFICATIONS

2
17
NO FUNCTION
LIVE
STUDIO
POWER
NO FUNCTION
DIMMER SPEED
17
240
15
NO FUNCTION
STROBE FROM SLOW TO FAST 0-25Hz
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
179
DIMMER SPEED
STROBE
16
129
PRESET DIMMER SPEEDFROM DISPLAYMENU
OFF
DIM1
DIM2
DIM3
DIM4
14
210
NO FUNCTION
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
CCT
1.2 SAFETY WARNING
IMPORTANT
This product mustbe installed bya qualified professional.
All maintenance mustbe carried outby a qualifiedelectrician.
A minimumdistance of 0.5mmust be maintainedbetween the equipment
and a combustiblesurface.
The product mustalways be operatedin a wellventilated area.
DO NOT stare directly intothe LED lightsource.
Always disconnect thepower before carryingout any maintenance.
The earth mustalways be connectedto the ground.
Ensure that allparts of theequipment are keptclean and freeof dust.
CHANNEL FUNCTIONVALUE

316
1
2
3
4
5
6
7
8
9
10
11
12
MASTER DIMMER
MASTER DIMMER FINE
RED
RED FINE
GREEN
GREEN FINE
BLUE
BLUE FINE
LIME
LIME FINE
AMBER
AMBER FINE
NO FUNCTION
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
NO FUNCTION
40
100
160
13
PRESET COLOR
2.1 MOUNTING
2 INSTALLATION
The LED fixture can be mounted in a hanging
position using the supporting bracket. The bracket
should be secured to the mounting truss or structure
using a standard mounting clamp. Please note that
when hanging the unit a safety cable should also be
used.
HANGING
220~240V: 7 units may be connected in series
110~120V:3units may beconnected in series
2.2 POWER CONNECTIONS
The LED MODULE can be mounted at any angle and in any
position. It is possible to further adjust the angle of the LED
MODULE using the two adjustment knobs located on the side of
the fixture.
Note:
If the signalcable is over 60m between theDMX512 controller and fixture
or beween twofixtures, then a DMX signal amplifier is needed as well.
CHANNEL FUNCTIONVALUE

4
MENU
RED
GREN
BLUE
R.(0~255)
G.(0~255)
B.(0~255)
STAT
STRB
S.(0~25)
15
AMBER
LIME
B.(0~255)
B.(0~255)
PRESET COLOR
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
RUN MODE
DMX
SLAVE
(001~512)
ADDRESS
HSIC
SDO
COLOR 8BIT
PERSONALITY
SIMPLE
COLOR 16BIT
NO FUNCTION
LIVE
STUDIO
POWER
NO FUNCTION
DIMMER SPEED
11
240
9
NO FUNCTION
STROBE FROM SLOW TO FAST 0-25Hz
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
179
DIMMER SPEED
STROBE
10
129
PRESET DIMMER SPEEDFROM DISPLAYMENU
OFF
DIM1
DIM2
DIM3
DIM4
ENTER UP DOWN
MENU
MENU
ENTER
DOWN
UP
BACK
ENTER OR SAVE
DOWN
UP
3.1 DISPLAY OPERATION
3.2 MENU MAP
3DISPLAY PANEL OPERATION
CHANNEL FUNCTIONVALUE

514
COLOR
SETTING
DIM3
DIM1
DIM2
DIM4
DIMMER
UC
OFF
PWM_RATE
FULL POWER CCT
BLACK
SAVE
DMX ERROR
SEND
YES
NO
UPLOAD
RESET
SEND
****
****
RESET
****
RGBtoW
OFF
600HZ
1200HZ
2000HZ
4000HZ
6000HZ
25000HZ
KEY ON
OFF
2700k
CALIB.C
WH.01
WHITE
WH.13
3000k
R.(0~255)
RGBotW
G.(0~255)
B.(0~255)
WH.02
10000k
****
INFO VERSION V01
RDM UID
LABEL
0X388A00006B36
ECLIPSE1000RGBAL
STUDIO
LIVE
PERFORMANCE
POWER
1
2
3
4
5
6
MASTER DIMMER
RED
GREEN
BLUE
LIME
AMBER
NO FUNCTION
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
NO FUNCTION
40
100
160
7
PRESET COLOR
8
210
NO FUNCTION
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
CCT
3200K
4200K
5600K
10000K
NORMAL
CHANNEL FUNCTIONVALUE

13
NO FUNCTION
LIVE
STUDIO
POWER
NO FUNCTION
DIMMER SPEED
6
240
4
NO FUNCTION
STROBE FROM SLOW TO FAST 0-25Hz
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
179
DIMMER SPEED
STROBE
5
129
PRESET DIMMER SPEEDFROM DISPLAYMENU
OFF
DIM1
DIM2
DIM3
DIM4
MENU
RED
GREEN
BLUE
R.(0~255)
G.(0~255)
B.(0~255)
AMBER
A.(0~255)
STAT
STROBE
S.(0~25)
LIME
L.(0~255)
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
MENU
D(001~512)
ADDRESS
MENU
3.3 EDIT STATIC COLOUR
Combine RED , GREEN , BLUE , AMBER and LIME to
create an infinite range of colors (0-255)
Set the value of the STROBE (0-25Hz)
3.5 DMX512 SETTINGS
Enter the ADDRESS mode to set the DMX ADDRESS.
3.4 MIX-COLOR SETTING
PRESET COLORSelect ENTER UP\DOMN from the menu to choose
different color mixture
PRESET COLOR
CHANNEL FUNCTIONVALUE
6

712
1
NO FUNCTION
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
NO FUNCTION
40
100
160
2
MASTER DIMMER
PRESET COLOR
3
210
NO FUNCTION
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
CCT
RUN MODE
DMX
SLAVE
MENU
Enter the RUN MODE mode to set working mode.
DMX mode is for using the DMX512 controller to control the fixtures.
SLAVE mode is for Master -- Slave operation.
3.6 RUN MODE
3.7 PERSONALITY
Enter the PERSONALITY mode to select DMX mode: ,
,,
HSIC SIMPLE
SDO COLOR 8BIT COLOR 16BIT
HSIC
SDO
COLOR 8BIT
PERSONALITY
SIMPLE
COLOR 16BIT
MENU
CHANNEL FUNCTIONVALUE

COLOR
SETTING
DIM3
DIM1
DIM2
DIM4
DIMMER
UC
OFF
PWM_RATE
FULL POWER CCT
BLACK
SAVE
DMX ERROR
SEND
YES
NO
UPLOAD
RESET
SEND
****
****
RESET
****
RGBtoW
OFF
600HZ
1200HZ
2000HZ
4000HZ
6000HZ
25000HZ
STUDIO
LIVE
PERFORMANCE
POWER
MENU
8
11
1
2
3
4
7
NO FUNCTION
STROBE FROM SLOW TO FAST 0-25Hz
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
179
STROBE
5
6
MASTER DIMMER
RED
GREEN
BLUE
LIME
AMBER
NO FUNCTION
LIVE
STUDIO
POWER
NO FUNCTION
DIMMER SPEED
8
240
3200K
4200K
5600K
10000K
NORMAL
3.9 SPECIAL SETTINGS
[SETTING]...this menu allowsthe user toadjust key operation settings for this fixture.
Select[UPLOAD] to uploadthe custom programsfrom the current MASTER unit to the
SLAVE units.
In order toreset custom modesto default values select [RESET] .
Note: [UC]\[RGBW]\[CALIB.C] can t reset
[COLOR] is for activate/unactivate the colorcalibration functions. When [RGBW] is
selected, on RGB= 255,255,255, the color is displayed as calibrated
in CALIB.C --RGBW. When[COLOR] is set [OFF] , on RGB = 255,255,255, the
RGBvalues are notadjusted and the output is mostpowerful.When [UC] is selected,
the RGB outputare adjusted toa standard preset universal color which balances
fixtures from differentgenerations.
Note: [COLOR]work only when choose [NORMAL]at [FULL POWER CCT]
Select [DIM1], [DIM2],[DIM3] or [DIM4]for different dimmingspeeds. ([DIM4]is the
slowest dimming speed)
Select[ ] to uploadthe custom programsfrom the current MASTER unit to the
SLAVE units.
[DMX ERROR] Choose[SAVE] in orderto save the last DMX data incase of DMX
signal error.Choose[BLACK]in order toblackout in case of DMX signal error.
<PWM_RATE> isPWM reflesh rate bottom, press UP/DOWN to choose <600Hz>
<1200Hz> <2000Hz> <4000Hz> <6000Hz> <25000Hz>
Note: with reflesh rate increased, grayrate of dimmerwill be reduced,(that's means
high reflesh rate, low gray rate),when it's <4000Hz>,CV3is invalid, whenit's
<25000Hz>,CV1 CV2 CV3 are invalid, so please lower PWMrate to increasegray rate
in necessary.
<FULL POWER CCT> is the color temperature choosebottom, press UP/DOWNto
choose, under full power, <3200K> <4200K> <5600K> can be chosen,
when choose <COLOR>, <3200K> <4200K> <5600K> are not work,
but choose <NORMAL>.
SEND
<>PERFORMANCE ...this setting allowsthe user toselect the performance
characteristics of thefixture.
<10000K>
<10000K>
CHANNEL FUNCTIONVALUE

910
2700k
CALIB.C
WH.01
WHITE
WH.13
3000k
R.(0~255)
RGBotW
G.(0~255)
B.(0~255)
WH.02
10000k
****
MENU
MENU
1
5
210
INTENSITY
HUE
HUE FINE
SATURATION
2
3
4
NO FUNCTION
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
CCT
6
NO FUNCTION
STROBE FROM SLOW TO FAST 0-25Hz
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
179
PRESET DIMMER SPEED FROM DISPLAY MENU
OFF
DIM1
DIM2
DIM3
DIM4
DIMMER SPEED
STROBE
7
129
NO FUNCTION
LIVE
STUDIO
POWER
NO FUNCTION
DIMMER SPEED
8
240
INFO VERSION V01
RDM UID
LABEL
0X388A00006B36
ECLIPSE 1000 RGBAL
KEY ON
OFF
MENU
3.10 ACTIVATE THE PASSWORD
Enter the KEY mode to select whether the access password is on or off.
When the fixture is set as PASS ON , after 30 seconds or turn on the fixture
next time, the fixture will need an access password to enter the display menu
control.
Note: The factory access password is UP +DOWN +UP +DOWN ,
then press ENTER to confirm the access.
Press MENU button to enterthe password confirmation,to enter the
correct password <UP + DOWN + UP+ DOWN >
Key, press the MENU in, the correctpassword will entershow submenu
3.11 BALANCE PARAMETERS AND CORRECTION
MENU DISPLAY
Enter the CALIB.C to select white color of different color temperature.
There are 13 pre-programmed White colors can be edited by using
RED , GREEN , BLUE , AMBER . & LIME .
Enter the RGBtoW to adjust the RGB parameter to make different
whites.
When the new setting is activated, the DMX controller choose RGB
= 255,255,255 the white color will be made by the actual RGB values
on the RGBtoW .
3.12 INFO
Press ENTER and go to INFO ,you can check VERSION , press
DOWN / UP to check RDM , LABEL , press MENU and back.
Note: This product have fourDMX512 channel configuration:
,,, ,HSIC SIMPLE SDO COLOR 8BIT COLOR 16BIT .
4.1 CHANNEL ASSIGNMENT
4 USING A DMX512 CONTROLLER
CHANNEL FUNCTIONVALUE