Sim-Lab GT2 User manual

GT2 Direct drive Cockpit
INSTRUCTION MANUAL
Copyright© 2021 - Sim-Lab Products | Revision 1.1
https://sim-lab.eu/shop/product/slc002-gt2-direct-drive-cockpit-black-452
inf[email protected]
SKU: SLC002

Thank you for purchasing a Sim-Lab GT2 Direct drive Cockpit! On
the following pages you will find a detailed instruction how to build
this cockpit. Assembling requires a set of simple tools, and general
knowledge of how to use them and a bit of technical insight.
Generally it takes about 3-4 hours to build this cockpit. Before
starting please check contents (page 9) and make sure all the parts
are accounted for in the packages.
5/6 mm 11 mm
Required tools:
BOX B (Hardware kit +
front mount set)
BOX C
(Pedal frame)
BOX A (Profile kit)
2

B14 B9 B1
Base assembly
Base assembly
a
3
A1
B2
B1
B9
B14
A2
C3

B15 B10
B14 B11
Mount caps (B2) on 40x80 profile before
mounting to base
Rubber feet
Upright assembly
3
4
B3
B16
B10
A3
B18 B14 B11
4x
4x
4x

C12 C7 C8
C12 C7 C4 C6
Pedal deck assembly
4
Mounting pedal deck to frame
5
5
C5
C1
C2
C6
C7
C7 C12
C8
C12
C4

*break off the lip on the connector bracket
B4 B30 B11
B31 B22
B26 B27 B28
Front mount assembly
6
Front mount brackets assembly
6a
6
B27
B26
B28
B21 B22
B21
B28
B11
B30
B4
B19

B14
B11
Mounting front mount to the base
7
7
B11
B14

B14
B11
GT2/TR1 brace assembly
8
8
B20
B11
B14

Parts list
BOX A
Base profiles
Part No. Part name QTY UoM Note
A1 Profile 40mm slot 8 (Black, 40x80L) - 1195mm 2 Units
A2 Profile 40mm slot 8 (Black, 40x80L) - 420mm 2 Units
A3 Profile 40mm slot 8 (Black, 40x80) - 500mm 2 Units
BOX B
Hardware kit
Part No. Part name QTY UoM Note
B1 Corner bracket 4040E + Cover cap 8 Units
B2 End cap profile (40x80L) 8 Units
B3 Rubber feet 4 Units
B4 Handle M8x20 2 Units
B5 Plastic sleeve black (10mm) 2 Units
B6 Bolt - DIN 912 (Black steel, 20mm, M8) 10 Units
B7 Bolt - DIN 912 (Black steel, 25mm, M8) 4 Units
B8 Bolt - DIN 912 (Black steel, 16mm, M6) 4 Units
B9 Bolt - DIN 912 (Black steel, 16mm, M8) 20 Units
B10 Bolt - DIN 912 (Black steel, 20mm, M6) 4 Units
B11 Bolt - DIN 7991 (Black steel, 20mm, M8) 30 Units
B12 Nut (M8, DIN 985 locknut, Galvanised) 8 Units
B13 Washer (Black steel, M8, Plain black) 10 Units
B14 Slot 8 nut (M8) 50 Units
B15 Slot 8 nut (M6) 20 Units
B16 Plastic sleeve black (10mm, M6) 4 Units
B17 Bolt - DIN 7991 (Black steel, 20mm, M6) 4 Units
B18 TR1/GT2 pedal deck triangle (set of 2) 1 Units
B19 TR1/GT2 45 degree wheeldeck sidemount (set of 2) 1 Units
B20 TR1/GT2 brace 1 Units
Front mount set
Part No. Part name QTY UoM Note
B21 GT2 Front mount set (Front + Left + Right plate) 1 Units
B22 Corner bracket 4040E + Cover cap 4 Units
B23 Bolt - DIN 912 (Black steel, 20mm, M6) 4 Units
B24 Bolt - DIN 912 (Black steel, 20mm, M8) 6 Units
B25 Bolt - DIN 912 (Black steel, 40mm, M8) 4 Units
B26 Bolt - DIN 7991 (Black steel, 25mm, M8) 4 Units
B27 Bolt - DIN 7991 (Black steel, 30mm, M8) 4 Units
B28 Nut (M8, DIN 985 locknut, Galvanised) 12 Units
B29 Spacer - male / female (10mm, M6) 4 Units
B30 Washer (Black steel, M8, Plain black) 12 Units
B31 Slot 8 nut (M8) 4 Units
BOX C
Pedal frame
Part No. Part name QTY UoM Note
C1 Profile 40mm slot 8 (Black, 40x40L) - 420mm (M8 thread) 2 Units
C2 Profile 40mm slot 8 (Black, 40x40L) 320mm 3 Units
C3 Profile 40mm slot 8 (Black, 40x80L) - 420mm 1 Units
C4 Corner bracket 4040E + Cover cap 10 Units
C5 End cap profile (40x40L) 2 Units
C6 Joint 40 2 Units
C7 Bolt - DIN 912 (Black steel, 16mm, M8) 24 Units
C8 Bolt - DIN 912 (Black steel, 20mm, M8) 2 Units
C9 Bolt - DIN 912 (Black steel, 16mm, M5) 12 Units
C10 Bolt - DIN 912 (Black steel, 16mm, M6) 12 Units
C11 Washer (Black steel, M8, Plain black) 28 Units
C12 Slot 8 nut (M8) 34 Units
C13 Slot 8 nut (M6) 12 Units
C14 Slot 8 nut (M5) 12 Units
9