Simpli Home ARTISAN AXCART11-HB User manual

ARTISAN / HOLDEN / STRATFORD
SIDEBOARD BUFFET
1/24
MODEL # AXCART11-HB
TM
TM
SI
M P HOME®
LIFE BY DESIG N

2/24
TM
TM
SI
M P HOME®
LIFE BY DESIG N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am –4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following
information ready:
Model # _________________Part Number or Letter_____________________
Purchased at ____________Date of Purchase _________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

3/24
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

4/24
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood
by causing it to expand and contract.
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
·If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3
to 4 inches away from the wall, giving the heat and air space to circulate.
·Dust with soft dry cloth.
·Do not use liquid or aerosol products.
·To avoid marking, do not place rubber on surface (foot pads, etc.)
·For soil build-up, wipe with damp cloth & dry.
·Do not use abrasive cleaners.
CARE and MAINTENANCE
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
5/24
TOP
QTY 1 BOTTOM SHELF
QTY 1 SHELF QTY 2
DOOR (L&R Same)
QTY 2
LEFT SIDE
QTY 1 LEFT DIVIDER
QTY 1
A B C
DLEL
F
RIGHT SIDE
QTY 1
DR
RIGHT DIVIDER
QTY 1
ER
LEFT BACK PANEL
QTY 1
GL
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
PRE-ASSEMBLY INFORMATION MODEL # AXCART11-HB
Front / Avant

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
6/24
DRAWER FRONT
QTY 6
LEFT DRAWER SIDE
QTY 6
DRAWER BACK
QTY 6
DRAWER BOTTOM
QTY 6
H
ILJ
K
RIGHT DRAWER SIDE
QTY 6
IR
MIDDLE BACK PANEL
QTY 1
G
RIGHT BACK PANEL
QTY 1
GRWarning Label
PRE-ASSEMBLY INFORMATION MODEL # AXCART11-HB
L
BOTTOM SUPPORT LEG
QTY 2

HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
7/24
ALLEN KEY
QTY 1
ALLEN KEY SCREW
M6 X 30mm
QTY 36
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 28
CAM LOCK PIN
CAM LOCK
QTY 24 SETS
ALLEN KEY BOLT
M6 X 30mm
QTY 12
HANDLE
M4 X 30 mm
QTY 8 SETS
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
MAGNET AND PLATE
QTY 2 SET SHELF SUPPORT
QTY 12
PHILLIPS SCREW
M3 X 12mm
QTY 12
PHILLIPS SCREW
M3 X 15mm
QTY 8
12 3 4
5678
9 10 11
PRE-ASSEMBLY INFORMATION MODEL # AXCART11-HB
12
PHILLIPS SCREW
M4 X 25mm
QTY 8
a.M4X25mm-QTY2
(1isextra)
b.M4X15mm-QTY1
c.M4X25mm-QTY1
FURNITURE TIP OVER
RESTRAINT
QTY 1 SET

8/24
A
B
C
C
DL
DR
F
F
GR
H
IR
IL
J
K
GGL
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
EL
ER
COMPONENTS-KEY DIAGRAM MODEL # AXCART11-HB
LL

STEP-1
1. Attach 4 Cam Lock Pins 3 to pre-drilled holes at back of Drawer Front H .
2. Use Phillips screwdriver to secure Cam Locks.
9/24
H
P
X
H
3
ASSEMBLY MODEL # AXCART11-HB

STEP-2
1. Align Cam Lock Pins with guide holes and attach Drawer Sides IL , IR .
2. Insert 2 Cam Locks 3 into guide holes on each Drawer Side IL , IR .
3. Use Phillips screwdriver to secure Cam Locks.
H
10/24
H
IL
IR
IR
IL
3
ASSEMBLY MODEL # AXCART11-HB

STEP-3
1. Slide Drawer Bottom K firmly into slots on Drawer Sides IL , IR and
Drawer Front H .
STEP-4
K
H
11/24
IL
IR
1. Align Drawer Back J with Drawer Bottom K and press firmly into slot .
2. Attach Drawer Back using 2 Allen Key Screws 2 through guide holes on
each Side IL , IR .
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
2
5
J
H
K
IL
IR
ASSEMBLY MODEL # AXCART11-HB

1. Use Phillips screwdriver to attach Handle 4 to Drawer Front H .
STEP-5
NOTE: The screwdriver is not
included in the hardware pack.
Repeat Step 1-5 for the other five drawers.
4
H
12/24
ASSEMBLY MODEL # AXCART11-HB

STEP-6
1. Attach Dividers EL , ER to Bottom Shelf B using 6 Allen Key Screws 2
(3 Screws / each Divider ).
2. Use Allen Key 5 to tighten screws. Do not over-tighten.
B
13/24
EL
ER
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCART11-HB
5
2

STEP-7
14/24
1. Attach Bottom Shelf B to Sides DL , DR using 6 Allen Key Bolts 1
( 3 Bolts / each Side ).
2. Use Allen Key 5 to tighten screws. Do not over-tighten.
B
1
5
EL
ER
DL
DR
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCART11-HB

STEP-8
15/24
1. Attach Top A to Sides DL , DR using 6 Allen Key Bolts 1 ( 3 Bolts / each Side ).
2. Attach Top A to Dividers EL , ER using 6 Allen Key Screws 2
( 3 Screws / each Divider ).
3. Use Allen Key 5 to tighten screws and bolts. Do not over-tighten.
1
5
5
2
B
A
EL
ER
DL
DR
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCART11-HB

STEP-9
16/24
1. Attach two Bottom Support Leg L to Bottom Shelf B using 8 Phillips Screws 11 .
2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
B
A
EL
ER
DL
DR
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCART11-HB
B
B
11

STEP-10
1. Attach the Back Panels GL , GR , G to back frame of cabinet using Phillips Screws
Round Head 6 through guide holes from panel.
2. Use Phillips screwdriver to tighten screws.
17/24
NOTE: The screwdriver is not
included in the hardware pack.
6
A
GL
G
GR
Front / Avant
Front / Avant
Warning Label
ASSEMBLY MODEL # AXCART11-HB
Note:
Thebackofthecabinetframedoesnothave
pre-drilledholestoattachthebackpanels.

STEP-11
18/24
A
B
F
F
DL
EL
DR
ER
First Step
Last Step (After adjust the door)
9
9
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
1.AttachhingesonDoorsFtoSidesDL,DRusingPhillipsScrews9intopre-drillholes:
- UsingPhillipsscrewdrivertoattachScrews9atmiddleholeofhingesfor
bothtop&bottomhinges.
-Adjustthedoortoensuretheyarealignedstraight&squarewithbottomshelf&side.
-UsingPhillipsscrewdrivertotightentherestofscrews9intopre-drillholes
(top&bottomholesonhinges).
ASSEMBLY MODEL # AXCART11-HB

STEP-12
19/24
A
B
F
F
1. Attach Magnet Plates 7 to bottom corner of Doors F using Phillips Screws 10
into pre-drilled holes on Doors F .
2. Attach Magnet 7 using Phillips Screws 10 into pre-drilled holes on Bottom Shelf B .
3. Use a Phillips screwdriver to attach Handles 4 to Doors F .
DL
EL
DR
ER
NOTE: The screwdriver is not
included in the hardware pack.
10
7
7
10
4
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCART11-HB

STEP-13
20/24
shelf support
anti - tipping
shelf level 1
shelf level 2
shelf level 3
8
C
C
8
1.Use4ShelfSupports8foreachCabinetShelfCindesiredlocation.
2.2ShelfSupports8maybeusedonbacktopofeachCabinetShelfCasa
tippingrestraint .
ASSEMBLY MODEL # AXCART11-HB