Coaster 202414 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
202414
MIRROR
www.coastercompany.com
PAGE 1 OF 3
REVISION 0 : 04/24/2012
REVISION 1 : 09/20/2018

ITEM:
HARDWARE IDENTIFICATION
1
STEP 1
AN
BN
1PC
1PC
MIRROR 1PAN HEAD SCREW
(M4 x 32mm - BLK)
6PCS
NOTE : PHILLIPS HEAD SCREW DRIVER IS
REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT
PROVIDE THIS ITEM.
DRESSER
202414 ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Donˊt attempt to repair or modify parts that are broken or defective. Please contact the store
2. This product is for home use only and not intended for commercial establishments.
immediately.
ASSEMBLY TIME 20 MINUTES
PARTS IDENTIFICATION
CN
PART NAME FIGURE QTY
MIRROR SUPPORT 2PCS
HARDWARE NAME FIGURE
*FROM BOX ITEM
#202413
(PACKED WITH
DRESSER)
PAGE 2 OF 3
www.coastercompany.com
BN
CN

STEP 2
1
BN
AN
ITEM: ASSEMBLY INSTRUCTIONS
STEP 3
COMPLETE
202414
PAGE 3 OF 3
www.coastercompany.com