Vivo CHAIR-K06S User manual

Instruction Manual
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Black Swivel Kneeling Chair with Wheels
SKU: CHAIR-K06S
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/chair-k06s

2
ASSEMBLY STEPS
PACKAGE CONTENTS
TOOLS NEEDED
A (x5)
Caster
B (x16)
M6x20
C(x2)
M8x60
D(x2)
Spacer
E(x1)
Rear Cover
F (x2)
Handle
G(x6)
M8x22x2.5
Washer
H (x4)
M8x38x1.5
Washer
STEP 1
Press the casters (A) into the underside of
the base (I). With the base upright, press
the pneumatic support (K) down into the
center hole, then place the support cover
(L) over the top of the support.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
250lbs
(113.40kg)
Phillips
Screwdriver
WARNING!
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose that
is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
STEP 2
Assemble the seat back (O) to the frame
(J) using x4 M6x20 bolts (B). Tighten with
the Allen wrench (P), then snap the rear
cover (E) in place.
A
E
B
I (x1)
Base
J(x1)
Frame
K(x1)
Pneumatic
Support
L(x1)
Support
Cover
M (x1)
Seat Pad
N(x1)
Knee Pad
O(x1)
Seat Back
P(x1)
Allen Wrench
I
K
L
O
J

3
STEP 3
Assemble the handles (F) to the seat pad
(M) using x8 M6x20 bolts (B) and tighten
with the Allen wrench (P).
STEP 4
Secure the seat pad (M) to the frame (J)
using x4 M6x20 bolts (B) with x4 M8x22x2.5
washers (G) and tighten with the Allen
wrench (P). The seam should be facing to
the back.
STEP 5
Slide M8x60 bolts (C) with an M8x22x2.5
washer (G) on each into the underside
of the front of the frame (J). Place an
M8x38x1.5 washer (H), spacer (D), then
another M8x38x1.5 washer onto each bolt,
then tighten bolts into the knee pad (N)
using the Allen wrench (P). The flat end
must be facing forward.
STEP 6
Place the assembled frame with pads onto
the assembled base and press down. Li
the lever on the side to adjust chair height,
and turn the rear knob to adjust seat back
tension.
F
B
B
B
G
G
D
H
H
C

LAST UPDATED: 07/08/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303