Manhattan Comfort 13GMC1 User manual

Assembly Guide
Model: 13GMC1 / 13GMC2 / 13GMC3
Floating Shelf
Stuck? Questions? We are here to help.
1-888-230-2225
[email protected]
1000010418 - 13/03/2019

In order to ease the assembly,
you should separate and identify the parts first
Do not place the parts directly onto the floor.
Use a cardboard sheet or a mat to place the
parts, during the separation and assembly.
3000009069 3000009086 3000009096 - STEEL 2 PC 12.67'' 11.22'' 0.59''
SIDE SMART
3000009111
3000009110
3000009058
3000009118
3000009121
3000009087
3000009122
3000009125
3000009098
-
-
-
STEEL
STEEL
STEEL
1
1
1
PC
PC
PC
13.58''
13.85''
13.66''
11.18''
11.18''
12.67''
0.59''
0.59''
0.07''
CEILING SMART
REAR SMART
BACK SMART
N°
P1
P2
P3
P4
DESCRIPTION BLACK MATT
WHITE MATT BLUE MATT GREY MATERIAL QUANTITY LENGTH WIDTH THICKNESS
Dimension
IDENTIFY THE COLOR OF YOUR CABINET
IDENTIFICATION OF PARTS
IMPORTANT
In order to avoid severe or even fatal
injuries, follow the instructions carefully.
*Tools Needed (not supplied)
STANLY

Lbs
Maximum weight
supported distributed
Hardware list
P1
P1
P2
P4
P3
26 Lbs
ASSEMBLED PRODUCT:
H: 12.59'' W:13.77'' L:11.22''
W
L
H
F1
1000008297
Qty. 4
F2
1000008616
Qty. 4
F3
1000009033
Qty. 1
F5
3000008409
Qty. 1
F4
1000000281 - WHITE
1000007352 - BLACK
1000010221 - BLUE
Qty. 4
F6
1000008285
Qty. 1

01
02
01
01
P1
P1
P4
1 - Attach the parts P1, under the part P4.
Positioning the cut-out of part P4 over the safety grappel of parts P1.
P1
P1
P4

01
04
01
03
P3
P3
P1
P4 P1
P3
1 - Slightly incline the part P3, and place it inside the cut - out of the parts P1.
2 - Slide part P3 into the folds of parts P1 and.
1 - With the end of F3, smash the safety claw, locking part P3 to part P1 and P4.
2 - Finish folding it mannually.
P3
F3
P1
P1

01
06
01
05
P2
IMPORTANT: REMOVE THIS RIBBON ONLY TO CONTINUE MOUNTING
P2
1 - Attach the P3 part onto the P1 and P2 parts.
2 - Check all the fittings, before continuing.
P2
P1P1
P1 P1
P4

01
08
01
07
07
1 - With the end of F3, smash the safety claw, locking part P1 to part P2 and P4.
2 - Finish folding it mannually.
P2
P2
P4
P4
P1
P1 F3
0°
CABINET HEIGHT
½”
F5
F5
1X
IMPORTANT: CABINET MUST BE ATTACHED TO THE WALL
USE THE CARDBOARD TEMPLATE TO FIX THE WALL CABINET ON THE WALL
IT IS IMPORTANT TO USE A LEVEL
1 - Using the F5 template, make markings on the wall as indicated.
2 - It is necessary to use the level.
3 - Drill the wall over the marked points.

01
09
F1
2X
1 - Insert the metal part of the bushing
into the hole until it overcomes
the wall.
2 - Pull the bushing driving it against
the wall and then push the plastic
ring until it leans close to the wall.
3 - Break the bushing's rods
WALL
1
WALL
2
WALL WALL
WALL
Plastic ring

01
11
01
10
2x
F2
F3
1- Insert the screw F2 into the hole on the wall.
2- Turn the screw clockwise, using the F3 part .
1- Approach the cabinet by fitting the F2 screw.

01
13
01
12
1 - Align the cabinet with the use of a level.
2 - Mark the wall through the holes in the bottom of the cabinet.
0°
½”
1 - Move the cabinet away
2 - Drill the wall over the marked points.

01
14
F1
2X
WALL WALL
Plastic ring
1 - Insert the metal part of the bushing
into the hole until it overcomes
the wall.
2 - Pull the bushing driving it against
the wall and then push the plastic
ring until it leans close to the wall.
3 - Break the bushing's rods
WALL
1
WALL
2
WALL

01
16
01
15
F2
2X
F3
1X
2x
F2
F3
1 - Position cabinet through the F2 screws that are already attached to the wall.
2 - Insert screw F2 through part P4.
2 - Turn the screw using the F3 part clockwise.
F4
4X
4x
F4
1 - Press part F4 against the heads of the F2 screws.

01
17
IMPORTANT: REMOVE THE RIBBON TO FINISH THE ASSEMBLY

ATTENTION
To avoid serious or irreparable damage to the product, follow the instrucons carefully.
TAKING GOOD CARE OF YOUR CABINET
Cleaning and caring instructions:
- Avoid dragging objects on top of the cabinet. They might scratch the
finishing.
- Only non-abrasive natural chemical products are recommended to clean
your cabinet. Simply wipe the cabinet down with a wet cloth to remove the
cleaning product excess.
- Never clean the cabinet with scouring powders, steel scrubber pads or
any other product which can scratch its surface.
- Chemical products are not recommended.
- Cabinet surfaces should not be covered with colored plastic or paper
sheets.
- Acid substances like salt, onion, ketchup and mustard must remain
properly stored in sealed containers.
- Avoid the direct contact of water with other surfaces than the sink, as the
humidity can affect the durability of the cabinets.
- Avoid cabinets exposure to direct Sun light. Drapers suggested.
- For technical assistance outside Brazil, please, contact the store where
you purchased your product.
- This guidance should be saved for future reference, if necessary.
BEWARE: Do not use a damp cloth to clean the cabinet. Excessive
moisture can damage its surface.

WARRANTS TERMS
This product has the guarantee for a period of twelve (12) months, this limited warranty is effective from the date
of the original consumer purchase. Proof of original purchase date is required to obtain service or replacement
under this limited warranty. Once the defect of manufacture has been verified, the consumer should contact the
store where he purchased the product. In the warranty period, any defective parts will be replaced free of
charge by another of the same line and model. The installation and assembly in the residence of the costumer is
not the responsibility of the factory or the store. The assembly must correctly follow the instructions inside the
packaging of each module.
ITEMS EXCLUDED FROM WARRANTS
This limited warranty does not cover:
1. In-home service including, but not limited to, service calls to correct the installation of any Manhattan Comfort
Smart Diy products or to instruct the consumer on how to use or install them.
2. Damage resulting from improper handling or shipping of products, or products damaged by accident,
alteration, misuse, abuse, fire, flood, improper installation, acts of God, neglect, corrosion, modification or
mishandling.
3. All travel, transportation, shipping or freight fees to deliver replacement products or to return defective
products.
4. Factory specified replacement parts or product replacement when your product is used in other than normal,
single-family household use, such as a commercial environment or handled in a manner contrary to published
user or operator instructions and/or installation instructions.
5. Aesthetic damages including scratches, dings, dents or cracks that do not affect the structural or functional
capability of the product.
6. Any labor costs during the limited warranty period.
7. Damage resulting from improper loading beyond the specified maximum weight capacity outlined in the
assembly instructions provided with the product including overloading of hooks, baskets, shelves, cabinets,
and other Manhattan Comfort Smart Diy accessories used with the product.
8. Surfaces damaged due to chemical interaction resulting in corrosion of paint or metal.
The cost of repair or replacement under these excluded circumstances shall be borne by the customer.
DISCLAIMER OF IMPLIED WARRANTY
Implied warranties, including any implied warranty of merchantability or implied warrant of fitness for a
particular purpose, are limited to one year or shortest period allowed by law.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
Your sole and exclusive remedy under this limited warranty shall be product repair as provided herein.
Manhattan Comfort Smart Diy shall not be liable for incidental or consequential damages.
Stuck? Questions? We are here to help.
1-888-230-2225
[email protected]

Stuck? Questions? We are here to help.
1-888-230-2225
[email protected]