Sinclair SDV4-140HB3P User manual

FULL DC INVERTER SYSTEMS
USER‘S MANUAL
WIRE CONTROLLER FOR HYDROBOX SDV4-140HB3P
C O M M E R C O N D I T I O N E R SA I RC I A L S D V 4

4.1 Turn On and Turn Off the
main unit
Thank you for purchasing our product.
Please read this manual carefully before running the unit and keep it for future reference.
Original instructions

CONTENTS
Safety precautions.................................................................
Technical data and characteristic.........................................
Overview ...............................................................................
Operation instruction............................................................
Error handling........................................................................
1
2
3
6
16
● This manual gives detailed description of the precautions
that should be brought to your attention during operation.
● In order to ensure correct service of the wired controller
please read this manual carefully before using the unit.
● For convenience of future reference, keep this manual after
reading it.
4.1 Turn On and Turn Off the
main unit

1. Safety precautions
Do not operate with wet hands or let water enter the wire
controller. Otherwise, the device lifespan will be shortened.

Please assign the distributor or professionals to install the device.
Imporper installation may lead to electric shock or fire.
WARNING
Do not install the unit in a place vulnerable to leakage of flammable gases.
Once flammable gases are leaked and left around the wire controller, fire
may occur.
4.1 Turn On and Turn Off the
main unit

2. Technical data and characteristic
2.1 Technical data
2.2 Characteristic
1) Input voltage: 10VAC.
2) Operating environment temperature of wired controller: -10°C~+43°C.
3) Operating RH of wired controller: RH 40%~RH90%.
1) Touch key operation;
2) LCD displays operation parameters;
3) Multiple timer;
4) Real-time clock (battery life:5~8 years).

4.1 Turn On and Turn Off the
main unit

3. Overview
Fig.3-1
 
















1. Operation icon
2. Mode area
3. Setting temperature
4. Timing On/Off
5. Function Icon
6. On-line Unit Qty. Indication
7. Water Level Indication
8. Clock
9. Water temp.
10.ON/OFF Key
11.Left Right Key
12.Confirm Key
13. FUNCTIONS key
14. Add and Reduce key
15. Cancel key
16. Mode key
(Long press 3s
for cancelling timing)
MODE
4.1 Turn On and Turn Off the
main unit
FUNCTIONS
(Long press 3s
for unlocking)







Operation icon :Indicate unit ON and OFF status; the icon displays when the unit
is on and does not display when the unit is off;
Mode area: Indicate the main unit operating mode;
Setting temperature: 2 status can be displayed: ;
Timing ON/OFF indication : Indicate the timing information; details refer to
Page 8;
Function icon
1) : Displays when water heater system connects to Modbus network;
2) : Displays when other heat source is provided to the system.
3) : Displays when water heater maintenance is needed. Press and hold
“MODE” key for 3 seconds to cancel the icon and timing will restart until
next maintenance;
4) : Displays when electric auxiliary heating function is on;
5) : Displays when check function is on; details refer to Page 14;
6) : Displays when ambient temperature is below 3°C which means the main
unit need anti-freezing action;
4.1 Turn On and Turn Off the
main unit


7) : Displays when no key operation for 2 minutes and all keys are locked.
Press and hold “OK” key for 3 seconds to unlock;
8) : Displays when error or protection occurs and means the unit need
maintainence by professionals.




On-line unit qty. indication: Under normal status display the quantity of units connected to
the wire controller; under check status display the device serial number;
Water level indication: Under normal status displays water level; Under water level setting
status displays setting value;
Clock: Under normal status displays clock; Under timing setting displays the setting timing,
details refer to Page 13;
Water temperature: Under normal status display water temperature; Under water temperature
setting status displays the setting value; Under cycle heating water temperature setting status
displays the setting value; under check status displays check parameter, details refer to Page
7;
ON/OFF key: Turn on and turn off functions; details refer to page 6.
Right and Left key: Press these keys to check setting water temperature, setting cycle
heating water temperature and setting water level under main page; Press right key to shift to
the next step setting under timing setting status; Press these keys to turn over the unit
parameter information under check status;
OK key: Press this key to confirm settings. Press and hold this key for 3 seconds to unlock
under locking status;
FUNCTIONS key: Setting water temperature, timing and mode etc, details refer to Page 7-13;
Press and hold this key for 3 seconds to enter check status, details refer to Page 14;




4.1 Turn On and Turn Off the
main unit

1) Press the On/Off key to control On and
Off status of the main unit.
2) Under Off status, press the On/Off key
“ ” to run the main unit, at that time
the LCD of wire controller will display the
operation icon “ ”. The main unit will
running as the current setting
of the wire controller.
3) Under On status, press the On/Off key
“ ” to turn off the main unit and the
operation icon “ ” on the LCD will
disappear.



Add and Reduce key: Move up or move down values of temperature, timing, water level etc;
Turn over #0#15 units under check status;
Cancel key: Press this key to cancel parameter setting under setting status; Press and hold
this key for 3 seconds to cancel timing when timing is valid;
Mode key: Choose water heating mode of the unit (floor heating and water cooling are not
available). When the screen is unlocked, press “Mode” once to enter into mode setting.

4. Operation instruction
Fig.4-1
Press one time
HEAT RUN
WATER
TEMP.
CYCLE
TIMER
ONLINE
QUANTITY
(Long press 3s
for cancelling timing)
(Long press 3s
for unlocking)
MODE
4.1 Turn On and Turn Off the
4.1 Turn On and Turn Off the
main unit
main unit
FUNCTIONS


Fig.4-2
WATER
TEMP.
CYCLE
ONLINE
QUANTITY
Press one
time
SET
RUN
TIMER
4.2 Setting operating modes and parameters
Press “FUNCTIONS” key to enter the operation mode and parameters setting. The setting contents
will change as the following order each time the key is pressed:
NOTE
ĮĮ ĮĮ
WATER
TEMP. DIFF TIMER CYCLE WATER CLOCK WATER LEVEL
TEMP.
TEMP. DIFFERENCE
MODE
Į
Į
MODE
Į
4.1 Turn On and Turn Off the
main unit
1) Setting water temperature: Press the “▲” or
“▼” to adjust the water temperature after
the controller is powered on. Or press “SET”
key once when “SET WATER TEMP” is
displayed on the LCD and then press “▲” or
“▼” to adjust water temprature.
Water temperature setting check: To check
the water temprature setting vaule, press
the “◄” or “► ” key under the main
page(the page displayed after the controller
is powered on).
The setting options in the dotted line frame
are not general setting. The wire controller
automaticly
judge the needed setting according to the
main unit model.
FUNCTIONS
(Long press 3s
for cancelling timing)
(Long press 3s
for unlocking)
HEAT


Fig.4-4
Fig.4-5
WATER
TEMP.
CYCLE
ONLINE
QUANTITY
RUN
TIMER
ON
Press
3 times

TIMER
ON
MODE
Fig.4-3
WATER
TEMP.
ONLINE
QUANTITY
RUN
Press
2 times
MODE
4.1 Turn On and Turn Off the
main unit
2) Set the stop and restart temperature
difference (Valid when the wire controller
is set to 5)
Continuous press “FUNCTIONS” key for 4
times to enter temperature difference
setting, the LCD will display “diFF”. Press
the “▲” or “▼” key to adjust the
temperature difference, press “OK” key or
wait for 7 seconds to confirm and back to
the main page. During setting process
pressing “CANCEL” key to exit without
saving. The range of temperature
difference is 2-10 degree.
Check the stop and restart temperature
difference setting: Press “◄” or “►” key
under main page to check the difference
value which has been set.
3) Timing setting: 3 timing periods can be
set on the wire controller: Timer 1,
Timer 2, Timer 3. These 3 timers can
control the main unit to be turned ON
and OFF 3 times at most during a day.
Setting method: press “FUNCTIONS”
key under main page three times to
enter timing setting. Then the LCD will
display as the following:
FUNCTIONS FUNCTIONS
(Long press 3s
for cancelling timing)
(Long press 3s
for unlocking) (Long press 3s
for cancelling timing)
(Long press 3s
for unlocking)
HEAT
HEAT


Fig.4-6
Fig.4-7
Fig.4-8

TIMER
OFF
TIMER
TIMER
ON
4.1 Turn On and Turn Off the
main unit
At this time the hour of the clock will flash,
which means the current setting is the hour
of Timer 1 “On”, press the “▲” or “▼” to
adjust, press “►” key when finished, and
then the minute of the clock will flash, which
means the current setting is the minute of
Timer 1 “On”, press the “▲” or “ ▼ ” to
adjust, press “►” key when finished, the
LCD will display as the following:
At this time the hour of the clock will flash,
which means the current setting is the hour
of Timer 1 “Off”, press the “▲” or “▼” to
adjust, press “►” key when finished, and
then the minute of the clock will flash, which
means the current setting is the minute of
Timing 1 “Off”, press the “▲” or “▼” to
adjust, press “►” key when finished, the
LCD will display as the following:
At this time the hour of the clock will flash, it
means the current setting is the hour of the
Timer 2 “On”.
And the follow setting method will be the
same as the Timer 1. Similarly, the setting of
Timing 3 is the same as this method. After
setting is finished, press “OK” key or wait for
7 seconds to confirm the setting, and the LCD
will display the effective timing information, as
the following display:



Yes
No
Yes
No
Example of Timing setting Main page
Ȓ
Press “FUNCTIONS” key twice to enter hour
setting interface of “Timer 1 On”
Ȓ
Ȓ
Ȓ
Press “ ” key to enter minute setting interface of
“Timer 1 On”, adjust the minute number to be 10
Press “ ” key to enter hour setting interface of
“Timer 1 Off”, adjust the hour number of “Timer 1
Off” to be 12
Press the “▲” or “▼” key to set the hour
number of “Timing 1 On” to be 07
Press “ ” key to enter minute setting interface of
“Timer 1 Off”, adjust the minute number to be 30
The setting steps of “Timer 2” and “Timer 3” are the same as “Timer 1”,
after setting all the settings then press “OK” key, the 3 timing periods will
be effective.
“Timer 1” setting
failed, after 7
seconds, the
page shift to the
main page.
Successfully set the On time of
“Timer 1” to be 07:10 and Off time
of “Timer 1 Off ” to be 12:30, then
back to the main page.
Finish setting the On time of
“Timer 1” to be 07:10 and Off
time to be 12:30, then enter the
setting of “Timer 2”.
Whether press “OK” key Whether press “ ” key
4.1 Turn On and Turn Off the
main unit


φ φ φ φ φ φ
φ φ
φ φ
To avoid timing error, each period of timing should not be crossed. E.g.:
Correct:
Wrong:
TIMER 1
TIMER 2TIMER 1
TIMER 2 TIMER 3
NOTE
4.1 Turn On and Turn Off the
main unit
During any period of timing setting to press “OK” key , the timing periods which have
been set will be effective (only if the “On” and “Off” of one timing period have been set,
the setting is effective).
Check timing information: to check the timing which has been set, press “◄” or “►”
key under main page, the “ On ”and “ Off ” time of Timer1, Timer 2 and Timer3 will be
displayed in turns.
Cancel timing: press and hold “CANCEL” key for 3 seconds, then all the effective
timing periods will be cancelled.

4.1 Turn On and Turn Off the
main unit
4) Set working mode(valid when wire controller set to 2,3,4)
Press “MODE” key to enter the working mode setting when the main unit is off power. Press the
“MODE” key to adjust , press “OK” key or wait for 7 seconds to confirm and back to the
main page; During setting process pressing “CANCEL” key to exit without saving. The
controller will show different working mode when it is applied to different main unit . See
fig.4-9.
Fig.4-9
WATER
TEMP.
CYCLE
ONLINE
QUANTITY
RUN
Working mode setting is valid only when the unit is power off.
“COOL” and “HOT WATER” are not avaiable.
NOTE

(Long press 3s
for cancelling timing) (Long press 3s
for unlocking)
MODE
FUNCTIONS
HEAT


Fig.4-10
WATER
TEMP.
CYCLE
ONLINE
QUANTITY
RUN
Press
4 times
To get the correct timing On and timing Off time, please correctly set the clock!
NOTE
Press the “FUNCTIONS” key 4 times to enter clock setting. The hour of the clock will flash, which
means the current setting is the hour of the clock, press the “▲” or “▼” to adjust, press “ ” key when
finished, and then the minute of the clock will flash, it means the current setting is the minute of the
clock, press the “▲” or “▼” to adjust, press “ OK ” key when finished or wait for 7 seconds to
confirm.During the setting process pressing the “CANCEL” key to exit without saving.
Ȑ
5) Set clock
MODE
4.1 Turn On and Turn Off the
main unit
FUNCTIONS
(Long press 3s
for cancelling timing)
(Long press 3s
for unlocking)
HEAT


Table 4-1




Mailing address
Network address or Remote address
The ability to dial
Operation capacity of indoor unit.
3˅Query˖
4.3 check
1) Check function allows the user to check all the operating parameters, error and
protection information of the main unit.
2) Enter method: press and hold “FUNCTIONS” key for 3 seconds to enter check
interface, as the figure display:
Fig.4-11
RUN
Press
3 seconds
CHECK
check
icon
check
parameter
check sequence
number
Main unit sequence
number
MODE
4.1 Turn On and Turn Off the
main unit
No. Display content (Normal display)
FUNCTIONS
(Long press 3s
for cancelling timing)
(Long press 3s
for unlocking)






Operation capacity of outdoor unit.
Setting temp.
Water inlet temp.
Water outlet temp.
Water temp.in tank




Condenser pipe temp.T2
Condenser pipe temp.T2B
EXV opening
The temperature difference of auto-restarting
 The cycle of auto-restarting


Last one error or protection
Last second error or protection
 Last third error or protection
4.1 Turn On and Turn Off the
main unit


5. Error handling
(
(
(
(
(
(
(
(G
(/
3E
)(
((
Table 5-1
Error code list (when the wire controller set to 1).
Conflict model error
Communication error
Sensor error of water inlet temp
Sensor error of condenser pipe temp(A)
Sensor error of condenser pipe temp(B)
Sensor error of water outlet temp
Sensor error of water temp.in tank(Reserve)
Outdoor unit or MS error
Cycle water flow detection error
No address code
Remote shutdown lock
Anti freeze protection
When the unit has error or protection, “ ” icon will flash. Press and hold “SET” key
for 3 seconds to enter check status and then press the “▲” or “▼” key to check the unit
of 0-15#. If the “error” icon is on, it means the corresponding unit has error or protection
at that time. The last 3 error or protection codes of the unit can be checked. The error
icon will disappear if the error or protection is cleared.
4.1 Turn On and Turn Off the
main unit
NOTE
dF:defrost operation
( EEPROM error
dF and d0 are normal operation,not error
d0:oil return operation

NOTE CONCERNING PROTECTION OF ENVIRONMENT
This product must not be disposed of via normal household waste after its service life, but
must be taken to a collection station for the recycling of electrical and electronic devices. The
symbol on the product, the operating instructions or the packaging indicate such disposal
procedures. The materials are recyclable in accordance with their respective symbols. By
means of re-use, material recycling or any other form of recycling old appliances you are
making an important contribution to the protection of our environment. Please ask your local
council where your nearest disposal station is located.
INFORMATION CONCERNING USED REFRIGERANT MEDIUM
This unit is containing fluorinated gases included in the Kyoto protocol. The maintanance and the liquidation
must be carried out by qualified personel.
Type of refrigerant: R410A
The composition of the cooling medium R410A: (50% HFC-32, 50% HFC-125)
The quantity of the refrigerant: please see the unit label.
The value GWP: 2088
GWP = Global Warming Potential
In case of quality problem or other please contact your local supplier or authorized service center.
Emergency number: 112
PRODUCER
SINCLAIR CORPORATION Ltd.
1-4 Argyll St.
London W1F 7LD
Great Britain
www.sinclair-world.com
This product was manufactured in China (Made in China).
REPRESENTATIVE, TECHNICAL SUPPORT
NEPA spol. s r.o.
Purkyňova 45
612 00 Brno
Czech republic
Tel.: [phone]
Fax: [phone]
www.sinclair-solutions.com
[e-mail]