Sinclair SDV5 Series Guide

CCM15
COMMERCIAL AIR CONDITIONERS SDV5

This manual gives detailed description of the precautions
that should be brought to your attention during operation.
In order to ensure correct service of the wired controller
please read this manual carefully before using the unit.
For convenience of future reference, keep this manual
after reading it.

Table of Contents
I. Safety Precautions.........................................................................................1
II. Installation and Operation of the Data Converter..........................................3
III. APP Function Description...........................................................................11
IV. Web Client Operation................................................................................ 36
V. Remote Web Client Operation.....................................................................37

I. Safety precautions
The following contents are stated on the product and the operation
manual, including usage, precautions against personal harm and
property loss, and the methods of using the product correctly and safely.
After fully understanding the following contents (identifiers and icons),
read the text body and observe the following rules.
Identifier description
gninaeMreifitnedI
Means improper handling may lead to personal
death or severe injury.
Means improper handling may lead to
personal injury or property loss.
[Note]: 1. “Harm” means injury, burn and electric shock which need
long-term treatment but need no hospitalization
2. “Property loss” means loss of properties and materials.
Warning
Caution

Icon description
Meaninglcon
It indicates forbidding. The forbidden subject-matter is indicated in the
icon or by images or characters aside.
Warning
Please entrust the distributor or professionals to install the
unit. The installers must have the relevant know-how.
Improper installation performed by the user without
permission may cause fire, electric,shock, personal injury
or water leakage.
Delegate
installation
Warning
Forbid
Forbid
Do not spray flammable aerosol to the wire
controller directly. Otherwise, fire may occur.
Do not operate with wet hands or let water enter
the wire controller. Otherwise, electric shock
may occur.
Usage
Warning
It indicates compulsory implementation. The compulsory subject-matter
is indicated in the icon or by images or characters aside.

II. Installation and Operation of the Data Converter
1. System structure diagram
The system mainly includes the central air conditioning system, data converter, router, App,
cloud server, and Web client. The user can monitor the air conditioning system via App or
Web client. The data converter is connected to the XYE bus of the air conditioner via port 485
of the air conditioner. The power supply is connected to the mains supply via an adapter. For
the detailed connection, see the following figure:
CCM15
Up to 8
refrigetant systems
LAN
WLAN
Indoor
Indoor unit
Tablet
Mobile phone
CCM15
Outdoor unit
Up to 10
P Q E
P Q E
Desktop
1 XYE port
Up to 64
indoor units
A1B1ELAN A2B2E XYE
A1B1ELAN A2B2E XYE A1B1ELAN A2B2E XYE A1B1ELAN A2B2E XYE

NOTE
It is recommended to wire from the Outdoor XYE port
If the data converter can only be connected to the outdoor unit, the outdoor unit shall be set
to enable automatic addressing so that the indoor unit can be located. For multiple systems,
port XYE of the outdoor unit is connected to the data converter in hand-in-hand manner. To
use one LAN cable to connect multiple CCM15 gateways, associate CCM15 gateways
with one router. For the configuration, see section 3.1.
Note: The new design as onm photo bellow CCM15 is compatiable with the
SDV4, SDV4F and SDV5 outdoor unit.
For more information, please contact the technical support engineer

2-1 Structural Dimensions (Unit：mm)
Direction A
225
128
95
28
209
2. Installation Method

Plastic expansion
pipe
Wall
6 mm bit drilling,
bit depth not less
than 30 mm
Cross round head wood
screw, GB950-86 M4X20
2-2 Installation Diagram

3. Preparation before installation
Check whether the following assemblies are complete
1
2
3
4
1
1
1
1
No. Name Qty. Remarks
For Mounting on the Wall
CCM15
Power Adapter
Accessory Bag
Installation Manual
12V/2A

4. Maintenance by Customer
1
2
3
4
No. Name Description
GND 12V
A2B2E
Supplies power.
Reserved
5 XYE Connect to port XYE of ODU
Reserved
LAN
A1B1E
Connect to the Ethernet
6 Dip switch S1-1 0:UDP 1:TCP
A1 B1 ELAN A2 B2 E X Y E

5.Getting an IP Address
By default, the IP address of the data
converter is achieved by DHCP and
allocated by the access router. Only when
App and data converter are configured on
one LAN, can App read the IP address of the
data converter. To set a static IP address for
the data converter, log in to the embedded
Web page of the data converter.
6.Function Description
The data convert supports Web, HTTP,
TCP, and IP. Therefore, the user can
remotely access the central conditioning
VRF system via WAN. The App client on
smart phones and Web client are available.
Function list of App client
CCM15 list.
CCM15 management.
Account management.
Group management.
Logs.
Temperature unit.
Log out.

Web function list
①"AC Control": air conditioner control
②"Booking Control": scheduled operations
③"Operation logs": operation logs
④"User group": group management
①
②
③
④
APP download
IOS:Go to APP Store seach ”M-control” or type www.aircontrolbase.com/login.html
to download the app
Android :type www.aircontrolbase.com/login.html to download the app

III. APP Function Description
1. Registration Function
1-1 Registration Code - sinclair
Before registering an account, the user must enter the registration code, as shown in the
following figure. Open App client on the smart phone. Enter the registration code, such as
s i n c l a i r s i n c l a i r s i c n a , which is the first step. Then, click "OK". A login interface with the specified
logo is displayed. See the following figure:(Note:Registration function only APP client)
sinclair

1-2 Account Registration
A registered account is used to manage devices and set management permissions. The
registered account can also be used to log in to the App and Web clients.
Procedure:
①Click "Register". ②Enter a valid email
account and password.
The account information
is generated on the
cloud platform.
③After registration is
completed, activate the
account via the email.
Only the activated
account can be used
(Note:Email could be
delayed)

1-3 Virtual function
The virtual experience function is used for showing the main interface , AC control,
booking control and so on. Operation only available for choosing the unit of the
temperature and setting the AC, the other menu and function are invalid in this function.

2. App Configuration
Refer to the guide to connecting the CCM15 and port XYE of the outdoor unit. Connect
the CCM15 to the router. After login via App, the main interface prompts the user to
configure the CCM15 , as shown in the following figure:
prompts CCM15 displays the CCM15
displays two
configuration. configuration
configuration manners:
using a network cable or
scanning a QR code.
NOTE
Please connect the CCM15 to a network with administrator level permission, or not it
may lead to security problems about account configuration.

Select a configuration manner.
The App will search for the CCM15 devices on its LAN and displays the IP address
of each CCM15 gateway. As shown in the figure above, displays multiple
CCM15 devices found. Only one CCM15 device can be selected for configuration.
Select one, and the system counts down. After configuration succeeds, it goes to the
main interface for displaying devices.
2-1: Using a Network Cable
Only when the following conditions are met, can the user configures the CCM15 via a
network cable:
The CCM15 must access a wireless router.
The smart phone and CCM15 must be located in one network segment and
connected to one wireless router.
The wireless router must access the Internet.

Click " CCM15 Management". Click "+" at the upper right corner. The CCM15
configuration interface is displayed. Select a configuration manner. The
subsequent steps are the same as those for configuring the CCM15 via a network
cable. Repeat the preceding steps to add multiple CCM15 devices until all the
CCM15 devices are configured.
Note: When one LAN accesses multiple CCM15 gateways, IP addresses of these
gateways are displayed, as shown in . In this case, one-to-one correspondence
between the CCM15 gateways and the IP addresses cannot be achieved. It is
recommended that every time when the user completes configuring a CCM15 device,
the user should timely rename the CCM15 device and record its IP address.
The following figure shows how to configure multiple CCM15 gateways: