Singer ESP 2 User manual

TABLE OF CONTENTSTABLE OF CONTENTS
Important Safety Instructions....................1-3Important Safety Instructions....................1-3
Getting toKnow YourSteam Press ...........4-5Getting toKnow YourSteam Press ...........4-5
Features of theSteam Press.........................6Features of theSteam Press.........................6
Operation&Instructions................................7Operation&Instructions................................7
Tips Pressing............................................8-11Tips Pressing............................................8-11
Cleaning the SteamPress.............. .............12Cleaning the SteamPress.............. .............12
Storage................................... ....................12Storage................................... ....................12
Troubleshooting..........................................13Troubleshooting..........................................13
Please read this manual carefully before using and keep itfor future reference.Please read this manual carefully before using and keep itfor future reference.
FABRIC STEAM PRESS INSTRUCTION MANUALFABRIC STEAM PRESS INSTRUCTION MANUAL
MODEL ESP 2MODEL ESP 2
RR

IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautionsWhen using electrical appliances, especially when children are present, basic safety precautions
should alwaysbe taken, including the following:should alwaysbe taken, including the following:
READ ALL INSTRUCTIONS BEFORE USINGREAD ALL INSTRUCTIONS BEFORE USING
KEEP AWAYFROM WATERKEEP AWAYFROM WATER
DANGER-Any appliance iselectrically live even whenthe switch is off.DANGER-Any appliance iselectrically live even whenthe switch is off.
Toreduce the risk of death by electric shock:Toreduce the risk of death by electric shock:
1.Always unplug it immediately after using.1.Always unplug it immediately after using.
2.Do notplace or store appliance where it can fall or be pulled into a tub or sink.2.Do notplace or store appliance where it can fall or be pulled into a tub or sink.
3.Do notplace in, or drop into wateror other liquid.3.Do notplace in, or drop into wateror other liquid.
4.If an appliance falls into water, unplug it immediately. Do notreach into the water.4.If an appliance falls into water, unplug it immediately. Do notreach into the water.
WARNING-To reduce the risk of burns, electrocution, fire, or injury topersons:WARNING-To reduce the risk of burns, electrocution, fire, or injury topersons:
1.This applianceshould neverbe left unattendedwhen plugged in.1.This applianceshould neverbe left unattendedwhen plugged in.
2.Close supervision is necessary when this appliance is used by or near children or the physically2.Close supervision is necessary when this appliance is used by or near children or the physically
challenged. Unsupervised use could result in fire or personal injury.challenged. Unsupervised use could result in fire or personal injury.
3.Use this appliance only for its intended useas described in this manual. Do not use attachments3.Use this appliance only for its intended useas described in this manual. Do not use attachments
not recommended by the manufacturer.not recommended by the manufacturer.
11
4.This appliance is not intended foruse by persons (including children) with reduced physical,sen-
sory or mentalcapabilities, or lack of experience and knowledge, unlessthey have been given
supervision or instructionconcerning use of the appliance bya person responsible for their safety.
4.This appliance is not intended foruse by persons (including children) with reduced physical,sen-
sory or mentalcapabilities, or lack of experience and knowledge, unlessthey have been given
supervision or instructionconcerning use of the appliance bya person responsible for their safety.

4.Never operate thisappliance if ithas a damaged cord or plug, if itis not workingproperly, or4.Never operate thisappliance if ithas a damagedcord or plug, if it is not workingproperly, or
7.Keep thecord away from heated surfaces. Do not allow cord to contact heated surfaces. Do not pull
or twist cord. Let appliance cool completely before putting away.
7.Keep thecord away from heated surfaces. Do not allow cord to contact heated surfaces. Do not pull
or twist cord. Let appliance cool completely before putting away.
8.This appliance has a polarized plug(one blade is wider than the other). As a safety feature, this plug
will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, Reverse theplug. If
it still does notfit, contact a qualified electrician. Do not attempt to defeat this safety feature.
8.This appliance has a polarized plug(one blade is wider than the other). As a safety feature, this plug
will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, Reverse theplug. If
it still does notfit, contact a qualified electrician. Do not attempt to defeat this safety feature.
9.Never dropor insert anyobject into any opening.9.Never dropor insert anyobject into any opening.
10.Do not use outdoors or operate where aerosol(spray)products arebeing used or where oxygen is
being administered.
10.Do not use outdoors or operate where aerosol(spray)products arebeing used or where oxygen is
being administered.
11.Do notuse an extension cordto operate appliance.11.Do notuse an extension cordto operate appliance.
12.Surfaces of this appliance may be hot when in use. Do notlet eyesor bare skin touchheated Surfaces.12.Surfaces of this appliance may be hot when in use. Do notlet eyesor bare skin touchheated Surfaces.
13.Always turn the switch to the off position before plugging in or unplugging the unit.13.Always turn the switch to the off position before plugging in or unplugging the unit.
14.Alwayslet the appliance cool for at least thirty minutes before storing.14.Alwayslet the appliance cool for at least thirty minutes before storing.
15.Do not move the appliance without unplugging it.15.Do not move the appliance without unplugging it.
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
6.Never operatethis appliance if it has a damaged cord or plug, if it is not working properly, or if it has
been dropped or damaged, or dropped into water. Do not attemptto repair the appliance. Incorrect
reassembly or repair could cause a risk of fire, electric shock, or injury to personswhen the appliance
is used. Return the appliance toan authorized service centre for examination and repair .
6.Never operatethis appliance if it has a damaged cord or plug, if it is not working properly, or if it has
been dropped or damaged, or dropped into water. Do not attemptto repair the appliance. Incorrect
reassembly or repair could cause a risk of fire, electric shock, or injury to personswhen the appliance
is used. Return the appliance toan authorized service centre for examination and repair .
16.Unplug this appliance before filling. Do not overfill.16.Unplug this appliance before filling. Do not overfill.
22
17.While emitting steam, this appliance may cause burns if it is held too close to theskin, scalp or eyes,17.While emitting steam, this appliance may cause burns if it is held too close to theskin, scalp or eyes,
5.Children should be supervised to ensure that theydo not play withthe appliance.5.Children should be supervised to ensure that theydo not play withthe appliance.

or if it is used incorrectly.Toreduce the risk of contact with hot wateras it escapes through steam
vents, testappliance before each use by holdingand testing it awayfrom body.
or if it is used incorrectly.Toreduce the risk of contact with hot wateras it escapes through steam
vents, testappliance before each use by holdingand testing it awayfrom body.
18.Do not operatesteamer without properly filling the watercontainer.18.Do not operatesteamer without properly filling the watercontainer.
19. Never yank cord to disconnect from outlet. Instead,grasp plug and pull to disconnect.19. Never yank cord to disconnect from outlet. Instead,grasp plug and pull to disconnect.
20.Burns could occur from touching hotmetal parts, or proximity to hot water orsteam. Donot turn
unit upside down- there may be hot water in reservoir.
20.Burns could occur from touching hotmetal parts, or proximity to hot water orsteam. Donot turn
unit upside down- there may be hot water in reservoir.
21.To reduce likelihood of circuit overload, do not operateanother high wattage appliance onthe same
circuit.
21.To reduce likelihood of circuit overload, do not operateanother high wattage appliance onthe same
circuit.
22.Use distilled water inthe appliance.22.Use distilled water inthe appliance.
23.Be careful. Burns can occur from touching HOTMETAL PARTS, OR PROXIMITY TO HOT WATER
OR STEAM.
23.Be careful. Burns can occur from touching HOTMETAL PARTS, OR PROXIMITY TO HOT WATER
OR STEAM.
24.Do notlet the cord hang over the edge of counter.24.Do notlet the cord hang over the edge of counter.
25.Always putthe appliance in a secure and level place on a table or counter when using.25.Always putthe appliance in a secure and level place on a table or counter when using.
26.This unit is for household use only.26.This unit is for household use only.
27. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. Loop
cord loosely around appliances when storing.
27. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. Loop
cord loosely around appliances when storing.
28.This appliance must be grounded. Donot alterthe plug or attempt to defeat this feature.28.This appliance must be grounded. Donot alterthe plug or attempt to defeat this feature.
29.Before plugging in the steam press, be sure the electrical information on the label agrees with your
power supply.
29.Before plugging in the steam press, be sure the electrical information on the label agrees with your
power supply.
SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
33

1.The Pressing Handleraises and lowers the Pressing Plate.1.The Pressing Handleraises and lowers the Pressing Plate.
2.The Locking Knobwill lock together thePressing
Plate and the Ironing Board. Use this to carry or store
the Steam Press.
2.The Locking Knobwill lock together thePressing
Plate and the Ironing Board. Use this to carry or store
the Steam Press.
3.The Steam Burst Buttons on eitherside of the Pre-
ssing Handle producea burst of steam when pressed.
3.The Steam Burst Buttons on eitherside of the Pre-
ssing Handle producea burst of steam when pressed.
4. The Pressing Plateit the temperature controlled
surface that heats and presses the fabric.
4. The Pressing Plateit the temperature controlled
surface that heats and presses the fabric.
5.The Ironing Boardis the padded surface that holds
the fabric during pressing. It has a removablecover
that is washable.
5.The Ironing Boardis the padded surface that holds
the fabric during pressing. It has a removablecover
that is washable.
6.The ON/OFF Switch.6.The ON/OFF Switch.
7.The Power Indicator Light illuminates when On/Off
Switch is Set tothe"On"position, providing you with a
clear visual indication that the unit is powered on.
7.The Power Indicator Light illuminates when On/Off
Switch is Set tothe"On"position, providing you with a
clear visual indication that the unit is powered on.
8.The Pressing Indicator Light illuminates while the unit is heating to theselected temperature ,
and deactivatesto providea clear visual indication that you are ready to beginpressing.
8.The Pressing Indicator Light illuminates while the unit is heating to theselected temperature ,
and deactivatesto providea clear visual indication that you are ready to beginpressing.
GETTING TO KNOW YOUR STEAM PRESSGETTING TO KNOW YOUR STEAM PRESS
9.The Steam Ready Indicator Lightilluminates once the unit is ready to produce bursts of steam,
providing you with a clear visual indication that you can begin using the Steam Burst Buttons.
9.The Steam Ready Indicator Lightilluminates once the unit is ready to produce bursts of steam,
providing you with a clear visual indication that you can begin using the Steam Burst Buttons.
11
22
33
44
55
66
77
77
88
88
99
99
1010
1010
1111
1212
1313 1414
44

12.The Pressing Cushionis a fabric coveredpad used for pressing gathered or contoured areas such
as sleeves,darts, yokes
12.The Pressing Cushionis a fabric coveredpad used for pressing gathered or contoured areas such
as sleeves,darts, yokes
13. TheMeasuring Cupis designed to assistyou in easily and consistently fillingthe Water Reservoir
with the optimum amount of water. filling the Water Reservoir with theoptimum amount of water.
13. TheMeasuring Cupis designed to assistyou in easily and consistently fillingthe Water Reservoir
with the optimum amount of water. filling the Water Reservoir with theoptimum amount of water.
14.The Spray Bottleallows you to moistenfabrics before pressing, when helps to make thepressing
process easier and more effective in certain instances.
14.The Spray Bottleallows you to moistenfabrics before pressing, when helps to make thepressing
process easier and more effective in certain instances.
The Auto Shut- Off feature includes both an Auto Shot- Off andan Auto Wake-Up .These multiple
function safety features deactivateelectrical power to the heater when the Pressing Plate has been
left closed againstthe Ironing Board for more than 10 seconds. Heater deactivationis signalled by a
beeping sound.Heater Functionality is restored whenthe Pressing Plate is raised back up. Power to
the heater will also be cut if the Pressing Plateis in the raised position without use for approximately
15 minutes(once again signaled bya beeping sound) The heating ability of the unit can only be restored
in this situation by pressing the Temperature Control Buttons.
The Auto Shut- Off feature includes both an Auto Shot- Off andan Auto Wake-Up .These multiple
function safety features deactivateelectrical power to the heater when the Pressing Plate has been
left closed againstthe Ironing Board for more than 10 seconds. Heater deactivationis signalled by a
beeping sound.Heater Functionality is restored whenthe Pressing Plate is raised back up. Power to
the heater will also be cut if the Pressing Plateis in the raised position without use for approximately
15 minutes(once again signaled bya beeping sound) The heating ability of the unit can only be restored
in this situation by pressing the Temperature Control Buttons.
11.The Water Tank11.The Water Tank
ABOUT THE AUTO SHUT-OFFABOUT THE AUTO SHUT-OFF
GETTING TO KNOW YOUR STEAM PRESSGETTING TO KNOW YOUR STEAM PRESS
10.The Temperature Control Buttonsare used to select a desired temperature by cycling through
the list of choices above the buttons. Push the Temperature Control Buttons until the indicatorlight
beneath the type of material youare going to press becomes illuminated.
10.The Temperature Control Buttonsare used to select a desired temperature by cycling through
the list of choices above the buttons. Push the Temperature Control Buttons until the indicatorlight
beneath the type of material youare going to press becomes illuminated.
IMPORTANT: Auto Shut- Off does not mean that power to the unit is totally cutoff. Power isalways on,
and the Power IndicatorLight will Remain illuminated until On/Off Switchis set to "Off"position.
IMPORTANT: Auto Shut- Off does not mean that power to the unit is totally cutoff. Power isalways on,
and the Power IndicatorLight will Remain illuminated until On/Off Switchis set to "Off"position.
55

FEATURES OF THE STEAM PRESSFEATURES OF THE STEAM PRESS
YourSteam Pressprovides clean,professional results every time!YourSteam Pressprovides clean,professional results every time!
.Pressing surface is fourteen times larger than most hand-held irons.Pressing surface is fourteen times larger than most hand-held irons
.Can reduce ironing time up to50%.Can reduce ironing time up to50%
.Multiple dry and steam settings, burst setting to remove stubborn wrinkles.Multiple dry and steam settings, burst setting to remove stubborn wrinkles
.Variable temperature control.Variable temperature control
.Automatic shut off safety feature while open or closed with audible alert.Automatic shut off safety featurewhile open or closed with audible alert
.Power indicatorlight.Power indicatorlight
.Protects delicate fabrics like silk.Protects delicate fabrics like silk
IMPORTANT For Household Use OnlyIMPORTANT For Household Use Only
Filling Instructions:Filling Instructions:
Do notplug the unit in until you have filled the WaterTankDo notplug the unit in until you have filled the WaterTank
1.Place DigitalFabric SteamPress on a flat, level surface.1.Place DigitalFabric SteamPress on a flat, level surface.
2.Turn Locking Knob to Unlock position to unlock pressing Plate.2.Turn Locking Knob to Unlock position to unlock pressing Plate.
3.Lift up PressingPlate using Handle. It will automaticallystay in lifted position.3.Lift up PressingPlate using Handle. It will automaticallystay in lifted position.
4.Pull WaterReservoir out. Note that Water Reservoir cannot be completely4.Pull WaterReservoir out. Note that Water Reservoir cannot be completely
removed fromunit; do not attemptto forceit free.removed fromunit; do not attemptto forceit free.
5.Remove Water Reservoir Cap toexpress Water Reservoir fillhole.5.Remove Water Reservoir Cap toexpress Water Reservoir fillhole.
6.Using Measuring Cup(included), fill Water Reservoir up to the MAX(300ml)6.Using Measuring Cup(included), fill Water Reservoir up to the MAX(300ml)
line with distilled water.line with distilled water.
66

7.Replace WaterReservoir Cap andpush filled Water Reservoir back intomain unit.7.Replace WaterReservoir Cap andpush filled Water Reservoir back intomain unit.
OPERATION INSTRUCTIONSOPERATION INSTRUCTIONS
1.Turn the ON/OFF Switch to the"on"position.1.Turn the ON/OFF Switch to the"on"position.
2.Identify the type of fabric you will press and then select the temperature
setting that matches the fabric tobe pressed. It is best to start with themost
delicate fabrics first, as higher heat will cause damage to Nylon and Silks.
2.Identify the type of fabric you will press and then select the temperature
setting that matches the fabric tobe pressed. It is best to start with themost
delicate fabrics first, as higher heat will cause damage to Nylon and Silks.
3.Lay fabric flat on Ironing Board.3.Lay fabric flat on Ironing Board.
4.Digital FabricSteam Press is ready for use when Pressing Indicator Light
deactivates. Ifpressing wool, you maychoose to spray witha burst of steam.
This function is availableonce Steam Burst Ready Indicator Light illuminates.
4.Digital FabricSteam Press is ready for use when Pressing Indicator Light
deactivates. Ifpressing wool, you maychoose to spray witha burst of steam.
This function is availableonce Steam Burst Ready Indicator Light illuminates.
NOTE: Donot activateburst of steam withunit completely closed, as this may
damage unit. Best results are obtained if Pressing Plate is held open approxi-
mately 75 mm aboveIroning Board before pressing Steam Button.For safety
reasons, do not hold Pressing Plate open more than 75 mm when using steam
burst function.
NOTE: Donot activateburst of steam withunit completely closed, as this may
damage unit. Best results are obtained if Pressing Plate is held open approxi-
mately 75 mm aboveIroning Board before pressing Steam Button.For safety
reasons, do not hold Pressing Plate open more than 75 mm when using steam
burst function.
5.Topress, lower Pressing Plate gently onto fabric and Ironing Board. Hold there for 6-8 seconds, then
lift up PressingPlate. Repeat until youhave achieved desired crease and smoothness.
5.Topress, lower Pressing Plate gently onto fabric and Ironing Board. Hold there for 6-8 seconds, then
lift up PressingPlate. Repeat until youhave achieved desired crease and smoothness.
6.Once Pressing tasks are complete, immediatelyset On/Off Switchto "off"position.6.Once Pressing tasks are complete, immediatelyset On/Off Switchto "off"position.
*DO NOT ATTEMPT TO PULL WATER RESERVOIROUT COMPLETELY.*DO NOT ATTEMPT TO PULL WATER RESERVOIROUT COMPLETELY.
77
OPERATION INSTRUCTIONSOPERATION INSTRUCTIONS

STEAM BURSTSTEAM BURST
1.Hold PressingPlate approximately 3" above IroningBoard.1.Hold PressingPlate approximately 3" above IroningBoard.
2.Press Steam Burst Buttonto release a burst of steam onto fabric.2.Press Steam Burst Buttonto release a burst of steam onto fabric.
3.Lowr Pressing Plate ontofabric, then raise once again.3.Lowr Pressing Plate ontofabric, then raise once again.
4.Repeat steps 1-3 above until fabric is smoothand wrinkle-free.4.Repeat steps 1-3 above until fabric is smoothand wrinkle-free.
IMPORTANT NOTEIMPORTANT NOTE
FOR BEST RESULTS, PRESS BUTTON FOR 2 SECONDS AND RELEASE.FOR BEST RESULTS, PRESS BUTTON FOR 2 SECONDS AND RELEASE.
STEAMING TIPSSTEAMING TIPS
Pressing GarmentsPressing Garments
1. Lay the garment on the Ironing Board.1. Lay the garment on the Ironing Board.
2. Lower the steam plate and return to the open position after a few seconds.2. Lower the steam plate and return to the open position after a few seconds.
NOTE: the unit will automatically turn off the heating plate afterNOTE: the unit will automatically turn off the heating plate after
10 secondsin the closed position. A beep will emit until the unit is opened.10 secondsin the closed position. A beep will emit until the unit is opened.
Once the unit is opened, it will return to normaloperation.Once the unit is opened, it will return to normaloperation.
Wrinkle RemovalWrinkle Removal
1. Lowerthe Steam Plate until it is slightly above the Ironing Board(about three inches).1. Lower the Steam Plate until it is slightly abovethe Ironing Board(about three inches).
2.Activate theBurst of Steam with the buttons on the sides of the Pressing Handle.2.Activate theBurst of Steam with the buttons on the sides of the Pressing Handle.
3.Wait a few seconds, and activate the Burst of Steamagain.3.Wait a few seconds, and activate the Burst of Steamagain.
88
TIPS PRESSINGTIPS PRESSING

Shirts and BlousesShirts and Blouses
1.Place theshoulder yokeon the Ironing Board
first and press.
1.Place theshoulder yokeon the Ironing Board
first and press.
2.Then place the sleeves on the Ironing Board with
the fold parallel to the long seam and press
2.Then place the sleeves on the Ironing Board with
the fold parallel to the long seam and press
3.Place the cuffs on the end of the board and press.3.Place the cuffs on the end of the board and press.
4.Place the bottom of the shirt behind Ironing
board so that you begin pressing pressing the
side with the pocket.Pull the shirt towards you
as you Press each section.
4.Place the bottom of the shirt behind Ironing
board so that you begin pressing pressing the
side with the pocket.Pull the shirt towards you
as you Press each section.
5.Then finish with the collar of shirt.5.Then finish with the collar of shirt.
4.Lower the Pressing Plate and then raise.4.Lower the Pressing Plate and then raise.
5.Repeat this process until all wrinkles have
been removed.
5.Repeat this process until all wrinkles have
been removed.
99
TIPS PRESSINGTIPS PRESSING
1122
3344
55

PantsPants
1.Place thePressing Cushion under the waistband and press,
repositioning the waistband untilcompletely pressed.
1.Place thePressing Cushion under the waistband and press,
repositioning the waistband untilcompletely pressed.
2.Topress the in-seam, place the cushion under the area to
be pressed.
2.Topress the in-seam, place the cushion under the area to
be pressed.
3.Place the pleated area on the Ironing Board. Carefully fold
pleats and press.
3.Place the pleated area on the Ironing Board. Carefully fold
pleats and press.
4.Embroidery should beplaced face down on the Ironing Board
to reduce wear and prevent damage to delicateareas.
4.Embroidery should beplaced face down on the Ironing Board
to reduce wear and prevent damage to delicateareas.
1010
TIPS PRESSINGTIPS PRESSING

Other TechniquesOther Techniques
1.Placing thepressing cushion between the fabric and the Pressing Plate may help with delicate fabrics.1.Placing thepressing cushion between the fabric and the Pressing Plate may help with delicate fabrics.
2.Buttons and Zippers: if you have older types of buttons or zippers, you mayneed totake special
care to avoid melting. In order to doso, place the garment face down and cover with a pressing
cushion before pressing.
2.Buttons and Zippers: if you have older types of buttons or zippers, you mayneed totake special
care to avoid melting. In order to doso, place the garment face down and cover with a pressing
cushion before pressing.
3.Spray bottlemay be used to spray the fabric lightly.This will further help toremove stubbornwrinkles.3.Spray bottlemay be used to spray the fabric lightly.This will further help toremove stubbornwrinkles.
4.Place a damp cloth over thefabric before pressing, which will help with stubborn wrinkles or heavy
gauge fabrics.
4.Place a damp cloth over thefabric before pressing, which will help with stubborn wrinkles or heavy
gauge fabrics.
5.Topress large pieces of fabric, place entire piece behind the Ironing Board. Pull the fabric towards
you, over the Ironing Board, and lower the Pressing Plate. Press the fabric in sections until completed.
5.Topress large pieces of fabric, place entire piece behind the Ironing Board. Pull the fabric towards
you, over the Ironing Board, and lower the Pressing Plate. Press the fabric in sections until completed.
1.For garments constructedwith details such as darts, curved seams, and
shoulder pads, a Pressing Cushion may be used.
1.For garments constructedwith details such as darts, curved seams, and
shoulder pads, a Pressing Cushion may be used.
2.Use the cushion in areas where no creases are desired or to shape a tailored
garment.
2.Use the cushion in areas where no creases are desired or to shape a tailored
garment.
3.Place the area to be pressed onto the Ironing Board.3.Place the area to be pressed onto the Ironing Board.
4.Place the Pressing Cushion under the dart, seam, etc.4.Place the Pressing Cushion under the dart, seam, etc.
5.Making sure that the area to be pressed is raised, lower the Pressing Plate
until it meets the raised area.
5.Making sure that the area to be pressed is raised, lower the Pressing Plate
until it meets the raised area.
6.Do notforce the plate toits lowest position, as this may cause damage to the unit.6.Do not force the plate toits lowest position, as this may cause damage to the unit.
Using the Pressing CushionUsing the Pressing Cushion
1111
TIPS PRESSINGTIPS PRESSING

CLEANING THE STEAM PRESSCLEANING THE STEAM PRESS
CLEANING THE STEAM PRESS & STORAGECLEANING THE STEAM PRESS & STORAGE
1.Place thePressing Cushion in the middle of Ironing Board.1.Place thePressing Cushion in the middle of Ironing Board.
2.Place a clean towel over the Pressing Cushion and the Ironing Board.2.Place a clean towel over the Pressing Cushion and the Ironing Board.
3.Set the temperature controlButton to its highest setting(LINEN).3.Set the temperature controlButton to its highest setting(LINEN).
4.When the Steam Burst Ready Indicator Light illuminates, lower Pressing
Plate ontothe pressing cushion.
4.When the Steam Burst Ready Indicator Light illuminates, lower Pressing
Plate ontothe pressing cushion.
5.Press the steam burstbutton six times.5.Press the steam burstbutton six times.
6.Allow the Pressing Plate to cool.6.Allow the Pressing Plate to cool.
7.Clean the pressing plate with a damp cloth.7.Clean the pressing plate with a damp cloth.
8. Do not useabrasives or you maydamage the plate.8. Do not useabrasives or you maydamage the plate.
9.The Ironing Board coveris removablefor cleaning. Hand wash only with
mild detergent.
9.The Ironing Board coveris removablefor cleaning. Hand wash only with
mild detergent.
STORAGESTORAGE
1. Oncepressing is complete, immediatelyturn unit off and unplug power
cord from electrical outlet.
1. Oncepressing is complete, immediatelyturn unit off and unplug power
cord from electrical outlet.
2.Allow unit to cool completely(at least 30 minutes).2.Allow unit to cool completely(at least 30 minutes).
3.Lower pressing plate down;and turn Locking Knob to"Lock"position.3.Lower pressing plate down;and turn Locking Knob to"Lock"position.
4.Wrap up power cord and place in Cord Storage Compartment.4.Wrap up power cord and place in Cord Storage Compartment.
5.Store all accessories safely away, preferably near Digital Fabric Steam Press.5.Store all accessories safely away, preferably near Digital Fabric Steam Press.
6.Store Digital Fabric Steam Press in a cool, dry place.6.Store Digital Fabric Steam Press in a cool, dry place.
7.For long-termof storage,Press the steam buttontime to time, touse up the water
remain in the water reservoir.
7.For long-termof storage,Press the steam buttontime to time, touse up the water
remain in the water reservoir.
1212

TROUBLE SHOOTINGTROUBLE SHOOTING
PROBLEMPROBLEM POSSIBLE CAUSEPOSSIBLE CAUSE SOLUTIONSOLUTION
Unit fails to steam.
Power IndicatorLight
does not illuminate.
Unit fails to steam.
Power IndicatorLight
does not illuminate.
Unit fails to steam.
Power Indicator
Light does illuminate.
Unit fails to steam.
Power Indicator
Light does illuminate.
Steam Burst output is
weak or intermittent.
Steam Burst output is
weak or intermittent.
Pressing Plate needs to be
cleaned.
Pressing Plate needs to be
cleaned.
Unit is damaged or malfunctioning.Unit is damaged or malfunctioning.
Water Reservoir is empty.Water Reservoir is empty.
Auto Shut-Off hasengaged.Auto Shut-Off hasengaged.
Household Circuit Breaker/
Ground FaultInterrupter has
tripped or blown a fuse.
Household Circuit Breaker/
Ground FaultInterrupter has
tripped or blown a fuse.
Unit is not plugged in.Unit is not plugged in. Plug into electrical outlet.Plug into electrical outlet.
Reset Circuit Breaker/Ground Fault
Interrupter,or replace fuse. If you need
assistance, Contact a licensed electrician.
Reset Circuit Breaker/Ground Fault
Interrupter,or replace fuse. If you need
assistance, Contact a licensed electrician.
Refer to Auto Shut-Off sectionon page 5
of this manualfor properprocedure.
Refer to Auto Shut-Off sectionon page 5
of this manualfor properprocedure.
Refill WaterReservoir using procedures
on page 6-7 of this manual.
Refill WaterReservoir using procedures
on page 6-7 of this manual.
Please contact ourcustomer support
department.
Please contact ourcustomer support
department.
Refer to Cleaning the Digital Fabric
Steam Press section on page 11 of this
manual for proper procedure.
Refer to Cleaning the Digital Fabric
Steam Press section on page 11 of this
manual for proper procedure.
Before taking the unit to a service center,please check the following list of common problems for yourissue.Before taking the unit to a service center,please check the following list of common problems for yourissue.
1313
WARNING:If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or a similarly qualified person in order to avoid ahazard.
WARNING:If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or a similarly qualified person in order to avoid ahazard.

V061008V061008
The meaning of the crossed-through waste bin symbol on the appliance is that the
product must be disposed of separatelyto otherhousehold waste at the end of the
useful life of the appliance. The user is responsible for delivering theappliance
to an appropriate collection centre at that time.
Appropriate separate collection for environment-friendlytreatment and recycling
prevents or reduces harmful effect on the environment and human health. You can
obtain information on available collection services in your area by contacting
your local Council waste collection department, or the retailer from which you
bought the appliance.
The meaning of the crossed-through waste bin symbol on the appliance is that the
product must be disposed of separatelyto otherhousehold waste at the end of the
useful life of the appliance. The user is responsible for delivering theappliance
to an appropriate collection centre at that time.
Appropriate separate collection for environment-friendlytreatment and recycling
prevents or reduces harmful effect on the environment and human health. You can
obtain information on available collection services in your area by contacting
your local Council waste collection department, or the retailer from which you
bought the appliance.
This electrical appliance complies with directive2002/96/EC(Waste Electrical
and Electronic Equipment----WEEE).
This electrical appliance complies with directive2002/96/EC(Waste Electrical
and Electronic Equipment----WEEE).