SIP Winntec 09807 Y440105 User manual

Winntec Engine
Leveller
For help or advice please
contact your distributor, or sip
directly on: Tel.: [phone]
Email:[email protected] or
[email protected]om
www.sip-group.com
SIP Industrial Products Limited
Gelders Hall Road
Shepshed
Loughborough
Leicestershire
LE12 9NH
United Kingdom
09807 Y440105

CONTENTS

Page No. Descripon
3.
Safety Instrucons
4.
6.Guarantee
7.
8.
10.
Operang Instrucons
11.
Maintenance
CONTENTS
Notes
Notes
Contents

Danger / Cauon: This picture indicates risk of personal injury and/
or the possibility of damage.
Note: This picture indicates supplementary informaon.
Important: Please read the following instrucons carefully, failure to
do so could lead to serious personal injury and / or damage to the
item.
4
SAFETY INSTRUCTIONS
When using your engine leveller, basic safety precautions should always be
followed to reduce the risk of personal injury and / or damage to the product or
load.
Read all of these instructions before operating the product and save this user
manual for future reference.
The product should not be modified or used for any application other than that
for which it was designed.
It was designed for lifting engines & loads up to 680kg. If you are unsure of its
relative applications do not hesitate to contact us and we will be more than
happy to advise you.
Before operating the product always check no parts are broken, and that no parts
are missing.
Always operate the product safely and correctly.
KNOW YOUR EGINE LEVELLER: Read and understand the owner's manual and
labels affixed to the product. Learn its applications and limitations, as well as the
potential hazards specific to it.
KEEP CHILDREN AND UNTRAINED PERSONNEL AWAY FROM THE WORK AREA: All
visitors should be kept at a safe distance from the work area; never allow
untrained persons to operate the shop press.
STAY ALERT: Always watch what you are doing and use common sense.
NEVER LEAVE THE ENGINE LEVELLER UNATTENDED: When in use / under load.
HAVE YOUR PRODUCT REPAIRED BY A QUALIFIED PERSON: The product is in ac-
cordance with the relevant safety requirements. Repairs should only be carried
out by qualified persons using original spare parts, otherwise this may result in
considerable danger to the user and void the warranty.

5
SAFETY INSTRUCTIONS...cont
DANGER! Check that the product is in sound condition and good working order; Take
immediate action to repair or replace damaged parts.
WARNING! Only operate on a level and stable surface and never use on soft ground
where the product is likely to “sink” whilst in operation.
NEVER STAND ON THE PRODUCT: The product is not designed for this purpose.
DO NOT dismantle or tamper with the product, as this may be dangerous and will
invalidate the warranty.
If a problem with the product is experienced or suspected stop using the product
immediately and contact your distributor for repair.
Do not attempt to apply a load that exceeds the rated capacity of the product.
Regularly inspect, clean and lubricate the product, ensuring that it is in good
working order and condition.
Always ensure that the work area is clean and tidy, free from unrelated materials and
has adequate lighting.
Keep hands, limbs etc. clear of moving parts during operation.
Failure to follow the warnings in this manual, may result in personal injury and/
or property damage.
Prior to applying the load, be sure that all chains are secure and connected
correctly.
Components of this product are specially designed to withstand the rated capacity.
Do not substitute bolts, pins, or any other components.
Always lift the load evenly. Offset loads can cause damage to the product and the
item being lifted..
Before operating, check for signs of cracks, bent support pins , loose or missing
bolts, or any other structural damage. Do not operate if any of these conditions
exist. Have repairs made only by an authorised service centre / engineer.
Due to various applications, it is your responsibility to always use adequate
protection, such as eye protection and heavy protective clothing, when operating
this .
Do not stand in front of work area where the load is applied.