SIRETTA QUARTZ-GOLD 5G NR User manual

QUARTZ-GOLD 5G NR
5G NR Industrial Router
Quick Start Guide
Rev 1.0

Whats in the Box?
This quick start guide is intended for the Siretta QUARTZ-GOLD 5G Series Routers.
If you ordered a router with accessories, you will also receive the following items:
Common Accessories
Ethernet Cable Power Adaptor

The QUARTZ-GOLD 5G DIN Rail
adapter does not come as a
standard part of the accessories
kit, but is available separately.
Please specify when ordering
Cellular Antenna x4 Power Cable and Connector
Magnetic Mount Antenna Extender x4

If you ordered a router with accessories and have opted for Wi-Fi, then you will also
receive the following items:
Optional Accessories
You will require the following items for conguring your router:
»SIM that is subscribed to a 5G service with APN details
»Paperclip or SIM card Removal Tool to eject the SIM tray
»PC to congure the router
Additional Items
NOTE -Please ensure your antenna and SIM card are appropriate for the router you are using.
WiFi Blade x2
(For routers with Wi-Fi antenna)

Step 1: Use a paperclip or Sim Card Removal Tool to eject the SIM tray on the router.
Step 2: Insert a SIM card into the SIM tray. Close the SIM tray, ensuring it is seated
back in place.

Step 3: Screw the cellular antennas to the main antenna connectors on the router.
Twist the antenna connector clock-wise until the antenna is rmly connected.
It is recommended to use the supplied magnetic mounts for maximum cellular
performance.
Connect the 2 Wi-Fi antennas marked “Wi-Fi1” and “Wi-Fi2” by twisting the
antenna connector clock-wise until the antenna is rmly connected.
Wi-Fi 1
Wi-Fi 2

Step 4: LAN CONNECTION: Connect one end of the Ethernet cable into the router
LAN port, connect the other end of the cable into an Ethernet port on your PC.
Step 5: POWER: Plug the green power connector on the power adapter cable into
the router as shown below. Plug the 2.1mm centre pin connector from the plug-top
power supply in to the other end of the power adapter cable.

Table 1. Router LED indication
Step 6: POWER: Select connector type for your power adaptor depending on your
geographical location (UK/EU/USA/AU). Plug the power adaptor to the mains.
Step 7: POWER: Switch on the power. See table below for LED indications when
router is powered on.
Label Indication Meaning
WLAN Green
Solid
Blinking activity
Off
WLAN connected
WLAN connected, LAN
network activity
WLAN disconnected
WAN Green
Solid
Blinking activity
Off
WAN connected
WAN connected, WAN
network activity
WAN disconncted
LAN Green
Solid
Blinking activity
Off
LAN connected
LAN connected, LAN
network activity
LAN disconnected
Cellular
Green (good cellular signal)
Red (poor cellular signal)
Slow blink
Fast blink
Solid
Registering to cellular
network / Cellular disabled
/ No SIM inserted
Connected to cellular
network, obtaining IP
address
Connected to cellular
network & connected to
Internet

Step 9: APN SET-UP: On successful login, navigate to the Basic Network > Cellular
tab.
When you arrive at the ‘Cellular Settings’ page, you will need to enter the APN details
for the network provider of your SIM card.
In the image below, we have used the APN details relevant for “EE”. These being:
• APN: everywhere
• Username: eesecure
• Password: secure
You are not required to enter any ‘Proxy’ or ‘Port’ details.
Step 8: IP ADDRESS: Obtain the IP address of your router. You can nd this on the
silver label on the back of your router. Type the IP address of your router into your PC
browser. When prompted for your user name and password use the following:
User name: admin
Password: admin
These credentials are factory defaults. You can set your own user name and password
in the router settings.

NOTE -If you cannot access the router GUI, please check your local area network settings.
Step 10: CONNECTING TO NETWORK: Click “Save”. Your router will reboot itself. The
router will then connect to the network and is ready for use with your application.
Further Information
For more information when using your router, a range of application notes, hardware
and software user manuals are available to download. You can request these from your
Siretta representative, alternatively these can be downloaded from www.siretta.com

Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire
RG7 1PW
United Kingdom
sales
email
Company No. 08405712
VAT Registration No. GB163 04 0349
[phone]
[email protected]
www.siretta.com
Rev 1.0