Sirio Antenne TOP-ONE User manual

DESCRIPTION
SPECIFICATIONS
Ground plane base station antenna working on CB and
10m band. Made of anti-corodal aluminium tubes. Its
robust structure ensure wide band and allows perfect
performances and very good connections at long
distances too.
Electrical Data
Type : 1/4 lGround plane
Frequency range : 26.5-28.5 MHz
Impedance : 50 W
Radiation (H-plane) : 360°omnidirectional
Polarization : Vertical
Gain : 0 dBd, 2.15 dBi
Bandwidth @ SWR £1.5 : ³2000 KHz (180 channel)
SWR @ res. freq. : £ 1.1
Max Power : 1000 Watts continuous
3000 Watts short time
Feed system : Gamma match
Connector : UHF-female
Mechanical Data
Materials : Aluminium, Steel, Brass, Nylon
Wind resistance : 130 Km/h
Length (approx.) : 3640 mm
Weigth (approx.) : 3900 gr
Mounting Mast : Æ35-42 mm
DESCRIPTION
SPECIFICATIONS
SIRIO TOP-ONE
CB & 10m band Base Station Antenna
SIRIO TOP-ONE
antenne
SIRIO
SHI-QUALITY ANTENNAS MADE IN ITALY
ID397, pag.1/4
MOUNTING INSTRUCTIONSMOUNTING INSTRUCTIONS
7788
1212
1111
1305mm
991010
Insert limit punching
Top section whip
Bottom section whip
Ø11x13x1300
alu. tube
(cone top side)
Mounting mast
(not supplied)
M6x12 hexagon
head screw
M6 washer
M6 spring
lock washer
Æ3.9x12.7
phillips
tapping
screw
M5x16 hexagon
head screw
M5 hexagonal nut
M5 washer
M4x4 hexagon
socket set screw
cup point
2mm hexagonal key
M6 hexagonal
nut
M6 washer
M6 spring
lock
washer
Aluminium ring
section
PVC cap for Æ8 alu tube
BCopyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 23/03/2009 - Cod. ID397, pag. 4/4
HI-QUALITY ANTENNAS MADE IN ITALY
TYPICAL S.W.R. RESPONSE
Model: SIRIO TOP-ONE
S.W.R.
1.0
1.2
1.8
1.4
2.2
1.6
2.0
2.4
2.6
2.8
3.0
25.4 27.4 29.4
f.(MHz)
File: F-01-029
26.5 - 28.5 MHz band
Hose clamp
Ø8x10x1400
alu. tube
(cone bottom side)
Ø6x8x700
alu. tube

ID397, pag.2/4
HI-QUALITY ANTENNAS MADE IN ITALY
n. 1 tape rules (meter)
n. 1 screwdriver cross point
n. 1 10mm open key
n. 2 8mm open key
Mounting needed tools:
Parts List
REMARK: use a good coax cable like RG-8 or RG-213 as short as possible
to get the best performance and we recommend to mount your antenna as
far as possible from metall roofs, walls, power lines and other antennas.
Description
Top section whip with connector
M5x16 hexagon head screws
M5 washer
M5 hexagonal nuts
gamma match assembly
M6 washer
M6 spring lock washer
M6 hexagonal nuts
Bottom section whip with reinforced side
Æ36-39mm hose clamp
Nylon ring
Nylon arms
Æ 3.9x12.7 tapping screws
M6x10 hexagon socket set screw cup point
3mm hexagonal key
Æ11x13x1300mm alu. tube (cone top side)
M6x12 hexagon head screws
Æ8x10x1400mm alu. tube (cone bottom side)
aluminium ring section
M4x4 hexagon socket set screw cup point
2mm hexagonal key
Æ6x8x700mm alu. tube
PVC cap for Æ8 alu tube
30x65mm steel “V” bracket
30x65mm steel “flat” bracket
M6x240mm U-bolt
Q.ty
1
6
6
6
1
11
11
7
1
1
1
4
8
1
1
4
4
4
4
4
1
4
4
3
3
3
to align
1122
3344
66
Nylon ring placed
in contact to the
edge of external tube
55
580mm
M5x16 hexagon
head screw
M5 hexagonal
nut
M5 washer
M6 hexagonal nut
M6 washer
M6 spring lock washer
M5x16 hexagon
head screw
M5 hexagonal
nut
M5 washer
Æ3.9x12.7 phillips
tapping screw
M6x10 hexagon socket
set screw cup point
3mm hexagonal key
Top section
whip with
connector
Nylon ring
Bottom section
whip with
reinforced side
Nylon arm
Gamma match
assembly
The aluminium
bracket must be
leant to the ring
MOUNTING INSTRUCTIONSMOUNTING INSTRUCTIONS
ID397, pag.3/4
HI-QUALITY ANTENNAS MADE IN ITALY