5
SIR-PAN1 Operation and Installation Guide
4SIRPAN1C InstallationGuide 5
SIRPAN1C InstallationGuide
CAUTION
This symbol means important
instructions. Failure to heed them
can result in injury or material
property damage.
HALT USE IMMEDIATELYIFA
PROBLEMAPPEARS. Failure to do so
may cause personal injury or damage
to the product. Return the unit to your
authorized retailer or nearest service
center for repairing.
INSTALLTHE WIRING SO THATIT IS
NOTCRIMPEDORPINCHEDBY
SCREWSOR SHARPMETALEDGES.
Routethe cables away from moving
parts or sharp pointed edges. This will
prevent crimping and damage to the
wiring. If the wiring must pass through
a metal hole, be sure to use a rubber
grommetto prevent the wire’s insulation
from being cut by the metal edge of the
hole.
WARNING
This symbol means important
instructions. Failure to heed them
can result in serious injury or death.
DO NOT OPERATE ANYFUNCTION
THAT TAKES YOURATTENTION
AWAY FROM SAFELYDRIVING
YOUR VEHICLE.
Any function that requires your
prolongedattention should only be
performed after coming to a complete
stop.Always stop the vehicle in a safe
location before performing these
functions. Failure to do so may result in
an accident.
DONOT OPEN, DISASSEMBLE OR
ALTER THE UNIT IN ANY WAY. Doing
so may result in fire, electric shock or
productdamage.
DONOTINSERTANYOBJECTSINTO
THE UNIT. Doing so may result in fire,
electric shock or product damage.
USETHE CORRECTAMPERERATING
WHEN REPLACING FUSE. Failure to
do so may result in fire, electric shock
or product damage.
MAKETHECORRECT
CONNECTIONS. Failuretomake
proper connections may result in fire
or product damage.
DONOTSPLICE INTOAELECTRICAL
CABLES. Never cut away cable
insulation to supply power to other
equipment.Doing so will exceed the
current carrying capacity of the wire
and result in fire or electric shock.
DONOTINSTALLIN LOCATIONS
THATMIGHT HINDERVEHICLE
OPERATION.Doing so may obstruct
vision or hamper movement which can
result in a serious accident.
DONOTINSTALLTHEUNITTOHIGH
LEVELSOFHUMIDITY,MOISTURE
OR DUST. Doing so can result in
electric shock or product failure.
FCC Warning: This equipment may
generate or use radio frequency
energy. Changes or modifications to
this equipment may cause harmful
interference unless the modifications
are expressly approved in this User
Guide. The user could lose the
authority to operate this equipment if
an unauthorized change or
modification is made.
Note: Thisequipment has been tested
and found to comply with Part 15 of the
FCC Rules. These rules are designed
toprovide reasonable protection
against harmful interference. This
equipmentmay cause harmful
interference to radio communications if
it is not installed and used in
accordance with these instructions.
However, there is no guarantee that
interference will not occur in a
particularinstallation. If this equipment
does cause harmful interference to
radio or television reception, which can
be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one of more of the
followingmeasures:
• Relocate the receiving antenna.
• Consult the dealer or an
experienced technician for help.
USETHE SPECIFIEDACCESSORY
PARTSAND INSTALLTHEPRODUCT
SECURELY. Be sure to use only the
specified accessory parts. Use of non-
specified parts may damage this unit
internally or may not securely install the
unit in place. This may cause parts to
become loose, resulting in hazards or
product failure.
USECAUTIONIFYOUNEED TO
DISCONNECTTHEBATTERY
TERMINAL.Pleaseconsultthe
vehicle’s owner’s manual or a service
technician prior to removing the battery
positive or ground connection, as it
may cause damage to the vehicle’s
electrical system or require
reprogrammingof the vehicle’s
computer-controlleddevices.