Sisloy Facelift Supreme User manual
USER MANUAL
2SISLOY FACELIFT
SISLOY FACELIFT
3
at the forefront of innovation and is what separates
Sisloy from many industry competitors. Sisloy Facelift
uses a combination of fractional infrared light therapy
and deep thermal heating, which is clinically proven
to stimulate collagen production.
The results are fascinating, with improved skin tex-
ture and tone along with drastically reduced wrinkles,
ne lines and reduced pore size.
Sisloy Facelift Supreme, the newest technology for
nonsurgical facial treatment that will give you imme-
diate results on ne lines and wrinkles. It is the only
one of its kind cleared as a medical device by the FDA.
Sisloy Facelift Supreme is clinically proven and derma-
tologist recommended.
It was designed and fully developed by doctors, scien-
tists, and engineers in Israel. It was proudly awarded
with the 2013 Product Of The Year award for Anti-
Aging, and has received numerous other industry
accolades.
The success behind our product line is our patented
High Fractional (HF) Technology. This technology is
SISLOY FACELIFT
4
Sisloy Facelift Supreme uses LED light emitting diode
with red light and 3 polar High Frequency technolo-
gies. The light penetrates the skin more eectively
than any cream and it uses proven technology exten-
sively researched by NASA.
The Sisloy Facelift Supreme treatment probe will
heat up to 107 degrees Fahrenheit to provide topical
heating that increases local blood ow. The in-
creased blood ow provides better oxygenation and
stimulates for collagen and elastin production thus
promoting skin cell regeneration at the epidermal
and dermal level.The red LED light and the 3 polar
HF technologies promote the production of new
skin cells, collagen bers and elastin, by doing that it
rejuvenates your skin. The red light is also known to
reduce melanin buildup in the skin thus reducing the
appearance of age spots and dark spots due to hyper-
pigmentation.
THE TECHNOLOGY
THE TECHNOLOGY
5
The Sisloy Facelift eectively treats:
• Dynamic wrinkles- expression lines.
• Static wrinkles - visible wrinkles (do not change with
facial movements).
• Pigmentation, freckles, sunspots and melasma.
• Loss of skin tone and skin rmness.
The wavelength of the Sisloy Facelift Supreme can
penetrate up to 3 millimeters under the skin reach-
ing the hypodermis level, which is the innermost and
thickest layer of the skin.
The Sisloy Facelift Supreme treats all layers of the skin
including the epidermis and dermis, all the way down
to the hypodermis, from surface to core.
THE TECHNOLOGY
-0.1m m
-0.5m m
-1.0m m
-1.5m m
-2.0m m
6
Before using Sisloy Facelift or Supreme for the rst
time, please read this manual in its entirety. Pay
particular attention to sections on device use proce-
dures, device operation, and after-use procedures.
Sisloy Facelift & Supreme devices consists of an Ap-
plicator and an Adaptor.
Sisloy Facelift & Supreme Applicator is a hand held
unit that contains Treatment Surface at the Applicator
tip, On/O Switch and Indicator Panel.
• The green Ready/Treatment - indicator light (I) illumi-
nates when pressing the ON/OFF switch.
HOW TO USE
HOW TO USE
7
• The green Ready/Treatment - indicator light (I) illumi-
nates when pressing the ON/OFF switch.
• The green StandBy - indicator light (G) illuminates
when the device is turned o.
• The yellow System Error - indicator light (H) illumi-
nates when a system error/malfunction occurs.
First wash your face with your favorite cleanser. Apply
Sisloy Serum and massage your skin for 30 seconds to
1 minute. Make sure the skin is clean and dry.
Press the Power On/O Switch. The green Ready/
HOW TO USE
Treatment Indicator Light (I) will start blinking, and
shortly afterwards will be lit steadily. After you turn
it on, the heating process will start quickly; however
there is no need to wait, just place the treatment
probe on your skin and the red light will automatically
activate, it only activates when it’s in full contact with
your skin.
Apply light pressure while slowly moving the Sisloy
Facelift in an upward motion.
Treat each area for 5 to 7 minutes. A single Sisloy
Facelift session usually takes 15-20 minutes in which
you should gently glide the Sisloy Facelift applicator
slowly over the desired treatment area. During the
8
procedure you should feel gentle heat penetrating
deep into the skin.
For best results after your treatment is recommend-
ed to apply the Sisloy Anti-aging Collagen face serum.
Typical areas for Sisloy Facelift treament are the
cheeks, forehead, neck, around the eyes and virtually
any other problem area.
The outcome of using Sisloy Facelift when following
instructions correctly will be the reduction of facial
ne lines, reducing pore size and improving the ap-
pearance of the face. Best results can be expected 3-7
weeks after completing the recommended course of
treatment.
TREATMENT
TREATMENT
9
MAINTENANCE REGIME
Use Sisloy Facelift once a week for 15-20 minutes. The
skin should be clean, dry and free of any powder, gel
or cream. If necessary a light oil based serum may be
applied thinly to the skin to help glide the device. Al-
low serum to absorb into the skin before treating.
Clean your Sisloy Facelift device after every use with
a dry cloth or paper towel, make sure not to allow any
moisture to penetrate the seams of the unit, don’t get
it wet!
Plan your Sisloy Facelift treatment for best results.
The eciency of the results varies from person to per-
son and according to the frequency of use. Some may
see results sooner than others.
INITIAL TREATMENT COURSE
For the rst month treatment should be performed
3 times a week for 15 to 20 minutes each time (5 to 7
minutes on each treatment zone).
TREATMENTTREATMENT
10
POSIBLE SIDE EFFECTS
When used according to the instructions, side efects
and complications associated with the use of Sisloy
Facelift Supreme are rare. However every cosmetic
procedure, including those designed for home use,
involve some degree of risk. Therefore it is important
that you understand and accept the risks and com-
plications that can occur with energy based systems
designed for home use. Sisloy Facelift treatments are
generally very well-tolerated.
Most users sense the moderate heat applied by the
device during use, with no further discomfort.
• Minor Skin Discomfort: Your skin may become
slightly irritated after using Sisloy facelift. This is a
typical and transient phenomenon. If the irritation
does not disappear within three days, please consult
a physician or a dermatologist.
• Skin Redness: Your skin may become slightly red
right after using Sisloy facelift. This should disappear
a few hours after treatment.
• Keep Sisloy Facelift Supreme out the reach of chil-
dren.
• Keep Sisloy Facelift Supreme out of the reach of
persons with reduced physical, sensory or mental
KOENIGSEGG AGERA R
SAFETY
SAFETY
11
capabilities.
• Keep Sisloy Facelift Supreme away from water. Do
not use or store Sisloy Facelift Supreme in a wet envi-
ronment.
• Do not use Sisloy Facelift Supreme Adaptor or the
Applicator is damaged.
• If the Applicator is damaged make sure it is re-
placed with an original part from Sisiloy.
•The Applicator contains a dedicated tranformer.
Never replace it with another transformer.
SAFETY
12
After each session, it is recommended to clean your
Sisloy Facelift device.
Turn Sisloy Facelift o by pressing the Power ON/
OFF Switch. Unplug the device from the electrical
outlet. Alllow cooling down of its Treatment Surface.
Use a dry, clean cloth and a specially formulated for
electronic equipment to gently wipe the device and
especially its Treatment Surface.
• Never immerse Sisloy Facelift Supreme or any of its
parts in water.
• Never clean the device or any of its parts under the
tap or in the dishwasher.
• Store your device in a clean area free of dust.
• Do not cover the ventilation slots during use.
• Never shake or drop the device or subject it to se-
vere shocks.
• Sisloy Facelift Supreme is sensitive to environmen-
tal temperature during use. Do not expose the Sisloy
Facelift to environmental temperatures lower than
15°C / 59°F or higher than 35°C / 95°F during use.
• Sisloy Facelift Supreme can not tolerate extreme
changes of temperature. When moved from a cold
environment (under 10°C / 50°F) to a warm environ-
ment, avoid use for approximately 3 hours.
MAINTENANCE
MAINTENANCE
13
• Do not expose Sisloy Facelift Supreme to direct sun-
light during long periods of time.
*Do not discard Sisloy Facelift with the normal house-
hold waste. Dispose of it at an ocial recycling collec-
tion point.
MAINTENANCE
14
SPECIFICATIONS
SPECIFICATIONS
15
Degree of protection against ingress water: IP30
ordinary.This device is not suitable for use in the
presence of ammable anesthetic mixture with air or
with Oxygen or Nitrous Oxide. The symbol on the
label anexed to this device means “Attention, consult
accompanying documents”.
For more information about SisloyTM products please
visit: www.sisloy.com
If your device is broken, damaged, in need of repair,
or for any other user assistance, please contact Sis-
loyTM Customer Service:
1-877-792-2761, contact@sisloy.com
International Customers:
For more information about Sisloy products or to nd
a list of International Sisloy websites please visit www.
sisloy.com
If your device is broken, damaged, in need of repair,
or for any other user assistance, please contact your
local SisloyTM Customer Service or write to: info@
sisloy.com (International) or contact@sisloy.com(US
and Canada).
Manufacturer: SISLOY. ISRAEL
SPECIFICATIONS
Address :
Phone :
Web :
Table of contents
