Sitecom WLX-5000 User manual

WLX-5000

Introduction
Thank you for purchasing the Sitecom WLX-5000 Wi-Fi range extender dualband N600.
With this product you can easily double the signal coverage of your Wi-Fi network for
better Wi-Fi quality in homes with many rooms or multiple floors. With both a Wi-Fi
extender and a power adapter in a compact design, the WLX-5000 can be plugged
directly into an electrical outlet for convenient placement. The smart signal strength LEDs
makes it easy for you to set it up where your Wi-Fi signal needs enhancement.
Additionally, it complies with wireless 802.11b/g/n standards and can create an extended
Wi-Fi network on both 2.4GHz and 5GHz with data transmission rates of up to 300Mbps.
With the WLX-5000, you can enjoy high-speed wireless networking throughout your
home without additional cabling.
The WLX-5000 features OPS buttons which allow you to set up the extender quick and
easy. Alternatively, the software wizard automatically detects the available Wi-Fi
networks nearby and helps you establish a connection within seconds. The OPS button
also allows you to connect the extender to the root access point with a simple click of a
button. Additionally, the WLX-5000 is designed with signal strength LEDs, which help you
find the best setup location for optimal Wi-Fi coverage.
Not only is the WLX-5000 very compact, it is designed with a built-in power adapter. This
design allows you to plug it directly into an electrical outlet, eliminating the need for an
additional power cable. You can easily install it where your Wi-Fi signal needs
enhancement and enjoy high-speed wireless performance without any hassles.
The latest 802.11n technology is built into the WLX-5000 to broaden its wireless
coverage and to eliminate dead spots within the wireless range. The WLX-5000 complies
with wireless 802.11b/g/n standards and can reach data transmission rates of up to
300Mbps when connected to wireless 802.11n devices. It provides faster and more
reliable wireless connections than standard 802.11b/g wireless networks.
This product can be used safely in the countries listed below:
This product complies with the following European Union regulations:

Table of Contents
1 Key Features........................................................................................... 6
2 Package Contents .................................................................................... 7
3 Cautions................................................................................................. 8
4 Product Layout ........................................................................................ 9
5 Network and System Requirements ......................................................... 11
6 WLX-5000 Placement ............................................................................. 11
7 Bringing up the WLX-5000 ...................................................................... 12
8 Connecting to the WLX-5000................................................................... 13
9 Setting up the WLX-5000 ....................................................................... 15
10 Configuration Wizard ............................................................................ 16
11 WiFi Settings ....................................................................................... 19
13 Toolbox .............................................................................................. 28

1 Key Features
Features
Advantages
Incredible Data Rate up to
300Mbps*
Heavy data payloads such as MPEG
video streaming
IEEE 802.11n Compliant and
backwards compatible with
802.11b/g
Fully Interoperable with IEEE
802.11b / IEEE802.11g compliant
devices with legacy protection
Support 802.1x authenticator,
802.11i (WPA/WPA2, AES)
Provide mutual authentication (Client
and dynamic encryption keys to
enhance security
Easy to use web-based GUI
Graphical User Interface for network
configuration and management
purposes.
OPS Button
Easily connect the device to your
existing network and your clients
with just the push of a button.
* Theoretical wireless signal rate based on IEEE standard of 802.11b, g, n chipset used.
Actual throughput may vary. Network conditions and environmental factors lower actual
throughput rate. All specifications are subject to change without notice.

2 Package Contents
Open the package carefully, and make sure that none of the items listed below are
missing. Do not discard the packing materials, in case of return; the unit must be
shipped back in its original package.
1. The WLX-5000 Wall Mount Range Extender N300
2. A Quick Install Guide

3 Cautions
This device’s design and manufacturer has your safety in mind. In order to safely and
effectively use this device, please read the following before usage.
3.1 Usage Cautions
The user should not modify this device. The environmental temperature should be within +5
~ +35 degrees Celsius.
3.2 Power
The device’s power voltage is AC 230v. When plugging in the device, make sure it cannot get
damaged or be subject to pressure. To reduce the risk of electric shock, unplug the device
first before cleaning it. Never connect the device to the power in a humid or dusty area.
3.3 Repair
If the device has a problem, you should take it to an appointed repair center and let the
specialists do the repair. Never repair the device yourself, you might damage the device or
endanger yourself.
3.4 Disposing of the device
When you dispose of the device, be sure to dispose of it appropriately. Some countries may
regulate disposal of an electrical device, please consult with your local authority.
3.5 Others
When using this device, please do not let it come into contact with water or other liquids. If
water is accidentally spilled on the device, please use a dry cloth to absorb the spillage.
Electronic products are vulnerable, when using please avoid shaking or hitting the device, and
do not press the buttons too hard.
Do not let the device come into contact with water or other liquid.
Do not disassemble, repair or change the design of the device, any damage done will
not be included in the repair policy.
Avoid hitting the device with a hard object, avoid shaking the device and stay away
from magnetic fields.
If during electrostatic discharge or a strong electromagnetic field the device will
malfunction, unplug the power cable. The product will return to normal performance
the next time it is powered on.

4 Product Layout
Description
OPS Button
You can use this button to connect using OPS.
OPS Button functions:
Press 0-5 seconds: WPS enrollee
Press 5-10 seconds: WPS registrar
Press 15+ seconds: reset to factory defaults.

LED Description
From top to bottom:
LED
Color
Description
Signal
Blue
This LED shows the quality of the signal it receives from your
Router/Access Point.
0-25%: 250 milliseconds ON –250 millisecond OFF
25-50%: 1000 milliseconds ON –1000 milliseconds OFF
50-100%: Continuous ON
WLAN
Green
Lights up when a WiFi signal is being transmitted/received.
Power
Red
Lights up when powered ON. Blinks on TEST/RESET.
OPS
White
Blinks when OPS mode is on.

5 Network and System Requirements
To begin using the WLX-5000, make sure you meet the following as minimum requirements:
PC/Notebook.
WiFi card/USB dongle (802.11 b/g/n) –optional.
PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
Router or Access Point
6 WLX-5000 Placement
You can place the WLX-5000 directly in a wall socket. For optimal performance, place
your Range Extender in a location that is away from any potential source of interference,
such as a metal wall or microwave oven. This location must be within a good signal range
from your existing router or access point, preferably above 50% signal strength.

7 Bringing up the WLX-5000
You can plug the WLX-5000 directly into a wall outlet. Switch the device on with the
power switch located on the bottom of the device. The WLX-5000 automatically enters
the self-test phase. During self-test phase, the Power LED will be lit continuously to
indicate that this product is in normal operation.

8 Connecting to the WLX-5000
Windows
Click on the icon for wireless connectivity. This is usually located in the System
Tray, next to the clock.
Select the network name of the Range Extender. The correct network name can
be found in the Network Details Folder.
Wait for the icon to display that it’s connected to the network.

Mac OSX
Click on the icon for wireless connectivity. This is usually located in the System
Tray, next to the clock.
Select the network name of the Range Extender. The correct network name can
be found in the Network Details Folder.
Wait for the icon to display that it’s connected to the network.

9 Setting up the WLX-5000
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://sitecom.ext in the address bar and press [Enter]
3. Type the password (default is admin) and Click Login.
4. You will see the home page of the WLX-5000.
The System status section allows you to monitor the current status of your device,
the UP time, hardware information, serial number as well as firmware version
information is displayed here.

10 Configuration Wizard
With the wizard you can configure the Range Extender to connect to your existing
network. Click Wizard to start configuring the WLX-5000. The Setup wizard will now be
displayed.
On the first page you need to select which frequency of your home router you want to
extend. If your router only supports 2.4GHz (single band), select “Setup 2.4GHz”.
Select the network that the Range Extender needs to connect to. You can also see the
signal strength, the channel and the encryption type used on the networks surrounding
the Range Extender.
Select your network from the list. Click Next.

Fill in the security key from your existing network. Please refer to the manual of your
router or access point on how to retrieve this key. Click Next.
Next, the settings are being verified. If the settings have been entered correctly the next
screen will be automatically shown.
If your home router also supports 5GHz (dual band) and you want to connect the Range
Extender to this network, you can follow the same steps again for the 5GHz network by
clicking “YES”. If you click “NO”, the next screen will be automatically shown.

Click Appy to save all settings and reboot the WLX-5000.

11 WiFi Settings
You can manually configure the WiFi settings of the Range Extender. The 2.4GHz and
5GHz network can both be configured separately. The settings for both frequencies are
similar, so only the 2.4GHz settings are shown here.
Basic
Band Please select the wireless band you wish to use. By selecting a
different band setting, you’ll be able to allow or deny the wireless
clients on a certain band.
MAIN ESSID Please input the ESSID (the name used to identify this wireless
access point) here. You can input up to 32 alphanumerical
characters. PLEASE NOTE THAT THE ESSID IS CASE SENSITIVE.
Channel Number Please select a channel number you wish to use. The channel
number must be same as the wireless access point you wish to
connect.
Associated Clients Click ‘Show Active Clients’ button and a new popup window will
appear which contains the information about all wireless clients
connected to this access point.
You can click the ‘Refresh’ button in the popup window to keep the
information up-to-date

Root AP SSID In ‘Universal Repeater’ mode, this device can act as a station to
connect to a Root AP. You should assign the SSID of the Root AP
here or click ‘Select Site Survey’ button to choose a Root AP.
Site Survey Click ‘Site Survey’ button, then a “Wireless Site Survey Table” will
pop up. It will list all available access points nearby. You can select
one access point in the table and the access point will join wireless
LAN through this access point.