Sitex GPK-11 MAX User manual

GPK-11 MAX
User Manual

2User Manual

3
User Manual

Providing you present valid proof of purchase, SI-TEX Marine Electronics warrants all parts of each new product against defects in
material and workmanship under normal use and will repair or exchange any parts proven to be defective at no charge for a period of
two years from the original date of purchase, except as provided below under Limited Warranty Exceptions. Defects will be corrected
during normal working hours by an authorized SI-TEX Marine Electronics dealer, service center, or at the SI-TEX oce in Riverhead, NY.
There will be no charge for repair labor for a period of one year from the date of purchase, except as provided below under Limited
Warranty Exceptions. This Warranty and Proof of Purchase must be made available to the authorized SI-TEX Marine Electronics service
location or dealer at the time of service.
LIMITED WARRANTY EXCEPTIONS
SI-TEX Marine Electronics will not be responsible for equipment which has been subjected to water or lightning damage, accident,
abuse, or misuse, nor any equipment on which the serial number has been removed, altered, or mutilated. SI-TEX Marine Electronics
assumes no responsibility for damage incurred during installation. This Limited Warranty is eective only with respect to the original
purchaser. Any cost associated with transducer replacement, other than the cost of the transducer itself,is specically excluded from
the Limited Warranty. Travel cost incurred will not be accepted by SI-TEX Marine Electronics.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.
SPECIFIC EXCLUSIONS
Charges for overtime, stand-by, holiday, and per diem are specically excluded from the Limited Warranty. fuses are consumable items
and are not covered by this Limited Warranty. Installation workmanship or materials, except as provided directly by SI-TEX Marine
Electronics are not covered by this Limited Warranty. SI-TEX Marine Electronics equipment, or parts thereof which have been repaired
or altered except by an authorized SI-TEX Marine Electronics dealer or service center are not warranted in any respect. Transducers,
software updates, batteries, magnetrons and microwave components, are items excluded from the two-year warranty and are covered
by warranty for a period of one year for both parts and labor.
SI-TEX Marine Electronics will not, at any time assume any costs or labor charges for checkout or external line fuse replacement or
problems not found to be at fault in the equipment itself.
THERE ARE NO WARRANTIES OR GUARANTEES EXPRESSED OR IMPLIED WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE
HEREOF, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. SI-TEX MARINE ELECTRONICS
HAS NO OTHER LIABILITY TO PURCHASE FOR DIRECT OR CONSEQUENTIAL DAMAGE OR ANY THEORY INCLUDING ABSOLUTE LIABILI-
TY, TORT, OR CONTRACT. THIS LIMITED WARRANTY CANNOT BE ALTERED OR MODIFIED IN ANY WAY AND SHALL BE INTERPRETED IN
ACCORDANCE WITH THE LAWS OF THE STATE OF NEW YORK. THIS WARRANTY IS LIMITED TO THE CONTINENTAL U.S.A., ALASKA,
HAWAII, AND CANADA.
MAILING ADDRESS:
SI-TEX Marine Electronics
25 Enterprise Zone Drive, suite #2
Riverhead, NY 11901
(631) 996-2690
HOW TO OBTAIN SERVICE UNDER THIS WARRANTY
To provide greater exibility, SI-TEX Marine Electronics gives you the option to obtain service under the warranty by either:
(a) Contacting an authorized SI-TEX Marine Electronics service station
(The closest service station may be found by contacting your dealer of purchase)
OR
(b) Shipping your equipment prepaid via UPS, FED-EX or truck with insurance prepaid to SI-TEX Marine Electronics. at the address
provided below. SI-TEX Marine Electronics will whenever possible, make all repairs covered by Limited Warranty within two weeks
of receiving the equipment in New York and return the same to you, freight prepaid.
Please do not use the Mail Service due to delays in tracing lost packages.
(c) You must present a copy of your Purchase Sales Slip at the time you request warranty service.
A product return form can be downloaded from the support section of our website at www.si-tex.com
SHIPPING ADDRESS:
SI-TEX Marine Electronics
25 Enterprise Zone Drive, suite #2
Riverhead, NY 11901
CERTIFICATE OF LIMITED WARRANTY
Page 1 of 2

Providing you present valid proof of purchase, SI-TEX Marine Electronics warrants all parts of each new product against defects in
material and workmanship under normal use and will repair or exchange any parts proven to be defective at no charge for a period of
two years from the original date of purchase, except as provided below under Limited Warranty Exceptions. Defects will be corrected
during normal working hours by an authorized SI-TEX Marine Electronics dealer, service center, or at the SI-TEX oce in Riverhead, NY.
There will be no charge for repair labor for a period of one year from the date of purchase, except as provided below under Limited
Warranty Exceptions. This Warranty and Proof of Purchase must be made available to the authorized SI-TEX Marine Electronics service
location or dealer at the time of service.
LIMITED WARRANTY EXCEPTIONS
SI-TEX Marine Electronics will not be responsible for equipment which has been subjected to water or lightning damage, accident,
abuse, or misuse, nor any equipment on which the serial number has been removed, altered, or mutilated. SI-TEX Marine Electronics
assumes no responsibility for damage incurred during installation. This Limited Warranty is eective only with respect to the original
purchaser. Any cost associated with transducer replacement, other than the cost of the transducer itself,is specically excluded from
the Limited Warranty. Travel cost incurred will not be accepted by SI-TEX Marine Electronics.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.
SPECIFIC EXCLUSIONS
Charges for overtime, stand-by, holiday, and per diem are specically excluded from the Limited Warranty. fuses are consumable items
and are not covered by this Limited Warranty. Installation workmanship or materials, except as provided directly by SI-TEX Marine
Electronics are not covered by this Limited Warranty. SI-TEX Marine Electronics equipment, or parts thereof which have been repaired
or altered except by an authorized SI-TEX Marine Electronics dealer or service center are not warranted in any respect. Transducers,
software updates, batteries, magnetrons and microwave components, are items excluded from the two-year warranty and are covered
by warranty for a period of one year for both parts and labor.
SI-TEX Marine Electronics will not, at any time assume any costs or labor charges for checkout or external line fuse replacement or
problems not found to be at fault in the equipment itself.
THERE ARE NO WARRANTIES OR GUARANTEES EXPRESSED OR IMPLIED WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE
HEREOF, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. SI-TEX MARINE ELECTRONICS
HAS NO OTHER LIABILITY TO PURCHASE FOR DIRECT OR CONSEQUENTIAL DAMAGE OR ANY THEORY INCLUDING ABSOLUTE LIABILI-
TY, TORT, OR CONTRACT. THIS LIMITED WARRANTY CANNOT BE ALTERED OR MODIFIED IN ANY WAY AND SHALL BE INTERPRETED IN
ACCORDANCE WITH THE LAWS OF THE STATE OF NEW YORK. THIS WARRANTY IS LIMITED TO THE CONTINENTAL U.S.A., ALASKA,
HAWAII, AND CANADA.
MAILING ADDRESS:
SI-TEX Marine Electronics
25 Enterprise Zone Drive, suite #2
Riverhead, NY 11901
(631) 996-2690
HOW TO OBTAIN SERVICE UNDER THIS WARRANTY
To provide greater exibility, SI-TEX Marine Electronics gives you the option to obtain service under the warranty by either:
(a) Contacting an authorized SI-TEX Marine Electronics service station
(The closest service station may be found by contacting your dealer of purchase)
OR
(b) Shipping your equipment prepaid via UPS, FED-EX or truck with insurance prepaid to SI-TEX Marine Electronics. at the address
provided below. SI-TEX Marine Electronics will whenever possible, make all repairs covered by Limited Warranty within two weeks
of receiving the equipment in New York and return the same to you, freight prepaid.
Please do not use the Mail Service due to delays in tracing lost packages.
(c) You must present a copy of your Purchase Sales Slip at the time you request warranty service.
A product return form can be downloaded from the support section of our website at www.si-tex.com
SHIPPING ADDRESS:
SI-TEX Marine Electronics
25 Enterprise Zone Drive, suite #2
Riverhead, NY 11901
Page 2 of 2
201-0256:1

5
User Manual

6User Manual
SMART GPS
SENSOR
1
2
345
6
7
1
2
345
6
7
8
1
2
34
5
6
+10-35 Vdc
GPS RX+
GPS TX+
GND/COMMON
RED
GREEN
BROWN
BLACK/YELLOW/SHIELD
CABLE,
Wire Color FUNCTION
1
2
3
6
7
1
2
3,6
CONNECTOR,
8 pins
CONNECTOR,
6 pins
1
2
34
5
6
+10-35 Vdc
GPS RX+
GPS TX+
GND/COMMON
RED
GREEN
BROWN
BLACK/YELLOW/SHIELD
CABLE,
Wire Color FUNCTION
1
2
3
6
CONNECTOR,
6pins
SMART GPS
SENSOR
SMART GPS
SENSOR
1
2
345
6
7
1
2
345
6
7
8
+10-35 Vdc
GPS RX+
GPS TX+
GND/COMMON
RED
GREEN
BROWN
BLACK/YELLOW/SHIELD
CABLE,
Wire Color FUNCTION
7
1
2
3,6
CONNECTOR,
8 pins

7
User Manual
GPS OVERALL SHAPE
Ø3.2mm [0.13”]
Ø25mm [1”]

8User Manual
60mm [2.63"]
41mm [1.61"]
98mm [3.86"]

9
User Manual
Ø20 mm [0.78"]
Ø3.2mm [0.13”]
GPS OVERALL SHAPE

10 User Manual
98mm [3.86"]
60mm [2.63"]
30mm
[1.18”]
Popular Receiver manuals by other brands

PS Engineering
PS Engineering PAV80 Installation and operation manual

Spektrum
Spektrum AR12020 user guide

Kenwood
Kenwood Sovereign VR-5700 Connection and setup guide

Panasonic
Panasonic TZ-DRD100 operating instructions

Crestron
Crestron HD-RX-4KZ-101-1G Getting started

moore o matic
moore o matic MDR, MDR2, MDRNR, MDRM, MDRM2 installation instructions