Skamol SkamoEnclosure User guide

Mounting instruction

2
In the package
Side board (2 pcs)
Internal reinforcement (3 pcs)
Back board (1 pcs)
Front board (1 pcs)
Temporary plug 4 + 1 pcs
Bottom plate (1 pcs)
Stove shelf (1 pcs)
Right top board (1 pcs)
Left top board (1 pcs)

3
In the package
Tools needed
SkamoEnclosure Corner (3 pcs)
SkamoEnclosure Primer (3 L)
Power drill
Bits Torx T20
Whisk
Plastic bucket
Brick trowel
Plaster trowel
SkamoEnclosure Glue (1 tube) Screws 5×90 mm (50 pcs)
SkamoEnclosure Smooth Plaster (15 kg)
or
SkamoEnclosure Structural Plaster (18 kg)
SkamoEnclosure Mesh (1 roll)

4
Assembly instructions
1. Begin with screwing the bottom and back board together.
2. Place the three reinforcements.

5
Assembly instructions
3. Place the stove shelf.
4. Now place the enclosure on the exact spot.
5. Place the side boards.

6
Assembly instructions
6. Place the front board.
7. Place the insert.

7
Assembly instructions
9. Place the left top board.
8. Connect the chimney.

11. Place the temporary plugs. These are only used when plastering.
10. Place the right side board.
Skamol Group
Sletvej 2C, 8310 Tranbjerg, Denmark
Tel.: [phone]
www.skamol.com