Skil-Care ChairPro 909350 User manual

Mounting Bracket
1. Remove the second
from-top screw from either
the left or right side of the
wheelchair backrest.
2. Remove grommet from
screw, place the screw
through hole on alarm unit
mounting bracket, and fasten
screw to wheelchair backrest.
(Illustration A)
GUARANTEES
1. he ChairPro Safety Alarm Unit is replacement guaranteed
for one year following the date of purchase.
2. he ChairPro sensor pads are replacement guarantee
for either 45 days or 180 days (see guarantee imprint on
sensor pad) following the date they are put into service. hat
date must be noted on the pad for this guarantee to be effective.
hese guarantees cover defects in materials and workmanship under
conditions of normal use. Please return defective part to dealer from
whom it was purchased. he dealer will send the defective part to
Skil-Care and arrange for shipment of a replacement.
PURPOSE
he ChairPro Sensor Pad Alarm is designed to alert caregivers when
a patient/resident has left or fallen from the wheelchair.
CAUTIONS
1. he ChairPro Sensor Pad Alarm is not a substitute for proper super-
vision. Fall-risk residents/patients should be monitored regularly.
2. Check battery each time alarm is used. If weak, replace the 9-volt
battery.
3. LED should glow when patient/resident is seated on the sensor
pad. If LED fails to glow, check battery. Replace if necessary. If LED
does not glow after battery is replaced, check sensor pad.
Alarm unit made in China. Instructions printed in USA.
INSTALLATION
Alarm Unit
29 Wells Avenue 914-963-2040
Yonkers, NY 10701 800-431-2972
1. Insert enclosed cord
loop through bracket
hole. (Illustration B)
2. Hang from wheel-
chair push-handle
(Illustration C)
A
B
C
Mounting Bracket
LED
SENSOR PAD ALARM
Continue on reverse si e.
Mo el # Description Unit
909350 ChairPro Sensor Pad Alarm Each
w/7”x15” 45-day sensor pad
909355 ChairPro Sensor Pad Alarm Each
w/7”x15” 180-day sensor pad
909356 ChairPro Sensor Pad Alarm Each
w/7”x15” 1-Year sensor pad
909430 ChairPro Sensor Pad Alarm Each
w/16”x16” 45-day sensor pad
909434 ChairPro Sensor Pad Alarm Each
w/16”x16” 180-day sensor pad
See reverse si e for replacement sensor pa or ering information.
Cor Loop
You may choose one of the following two ways
to attach the alarm unit to the wheelchair.
4. If patient/resident is seated on a wheelchair cushion, place sensor
on top of cushion. his system will not work if sensor is placed
beneath cushion.

Advanced design for nursing and therapy.TM
Alarm unit made in China. Buckle made in aiwan.
Visit us online
at Skil-Care.com
Sensor Pa
1. Place sensor pad on
wheelchair seat as
shown. (Illustration D)
2. Sensor pad connec-
tor cord is then placed
through the space
between the wheelchair
seat and backrest.
Make certain that it is
away from wheels and
other moving parts.
OPERATION
1. Remove battery compartment cover on left side of
alarm unit and install 9-volt battery.
2. Press Battery est button. If alarm doesn’t sound,
check battery connection and retest. If alarm fails to
sound, replace battery.
3. Insert telephone-style plug in
to Modular Receptacle on right
side of alarm. (Illustration E)
Alarm will sound. Press Auto-
Reset to silence alarm.
4. Before using, test unit by
pressing the palm of your hand
firmly against the sensor pad.
While doing this, check alarm to
make certain that LED is glow-
ing. Remove your hand. Alarm
should sound. Press Auto-
Reset button to silence alarm. If
alarm fails to sound, make certain that telephone-style
plug is secure.
5. Select High or Low alarm volume using switch on
right side of alarm.
6. When alarm is activated by patient/resident leaving the
wheelchair, it may be silenced by pressing the Auto-Reset
button. he alarm is now in stand-by mode. he system
will automatically go into the monitoring mode when the
patient/resident is reseated. There is no on/off switch.
SAFETY REMINDERS
1. Check battery before each use. If alarm is weak or fails
to sound, replace 9-volt battery.
2. When unit is in use, check LED regularly. If it is not
glowing, replace 9-volt battery.
Replacement sensor pa s are available from your
me ical supply ealer.
3. Important: If patient/resident is using a wheelchair
cushion, the sensor pad must be placed on the cushion,
not under it. his system will not work if sensor pad is
placed beneath a cushion.
4. Sensor pad may be cleaned with a damp cloth and
mild cleanser. Do not immerse pad in water or cleaning
solution. Do not sterilize.
5. Inspect pad before each use. Replace if damaged.
6. Read “Warnings” on sensor pad
D
E
Mo el # Guarantee Mo el# Guarantee Size Unit
909360 45 Days 909363 180 Days 7” x 15” Each
909361 45 Days 909364 180 Days 7” x 15” 5/Pk
909362 45 Days 909365 180 Days 7” x 15” 10/pk
909358 1 Year 909359 1 Year 7” x 15” 10/pk
909431 45 Days 909435 180 Days 16” x 16” Each
909432 45 Days 909436 180 Days 16” x 16” 10/pk