SKINREVERSE ADVANCED DERMALIFT User manual

SKINREVERSE®
ADVANCED DERMALIFT
USER’S MANUAL

2
SKINREVERSE®ADVANCED DERMALIFT

3
SKINREVERSE®ADVANCED DERMALIFT
SKINREVERSE®ADVANCED DERMALIFT
PRODUCT STRUCTURE

4
SKINREVERSE®ADVANCED DERMALIFT
COMPONENTS & ACCESSORIES

5
SKINREVERSE®ADVANCED DERMALIFT
HOW TO USE
BUTTONS AND DISPLAYS
LCD DISPLAY
MULTIFUNCTIONAL
BUTTON
HOW TO USE THE BUTTONS
•Short press the OK button to turn on/off the device.
•Swipe to change the mode. Once you select a
mode press OK to select the mode.
•Swipe to change the level strength.

6
SKINREVERSE®ADVANCED DERMALIFT
DISPLAYS
The level indicator on the screen shows the
level strength when using a certain mode.
The power icon found on the top-right
corner of the screen displays the charge
level of the device.
The RF icon in the middle of the screen
shows that radiofrequency will be applied.
The RF function can be used in a
standalone form to activate collagen and
reverse the effects of aging, or it can be
used in conjunction with other modes, ION,
ENI, and EMS.

7
SKINREVERSE®ADVANCED DERMALIFT
MODES
Skinreverse Advanced Dermalift has 5 modes:
1. RF+PHOTON MODE
2. ION MODE
3. ENI+PHOTON MODE
4. EMS+PHOTON MODE
5. COOL+PHOTON MODE
Select the appropriate mode or combination of modes
according to your needs, your skincare routine, or your
skin goals. Each mode has a pre-set maximum duration,
after which the device will turn to standby mode.

8
SKINREVERSE®ADVANCED DERMALIFT
TECHNOLOGIES
Skinreverse Advanced Dermalift incorporates 7
technologies:
1. RADIOFREQUENCY (RF)
2. SONIC VIBRATION (SM)
3. IONTOPHORESIS (ION)
4. LED LIGHT THERAPY (LED)
5. ELECTROPORATION (ENI)
6. ELECTRICAL MUSCLE STIMULATION (EMS)
7. COOLING (COOL)

9
SKINREVERSE®ADVANCED DERMALIFT
MODE 1
RADIO FREQUENCY (RF) MODE
RF+RED LED LIGHT
Professional radiofrequency and phototherapy
functions are synchronized to enhance anti-aging
effects. This mode is mainly aimed at older users with
milder signs of aging. RF heats the dermis for 20sec up to
140oF (60oC) after which a constant heat between 104oF -
107oF (40-42oC) is maintained. This enables radio waves
to penetrate the deeper skin layers where it can stimulate
the production of collagen and elastin fibers, promoting
skin metabolism thus rejuvenating and firming the
skin. Wash your face before use, and/or use skin care

10
SKINREVERSE®ADVANCED DERMALIFT
products such as anti-aging gels or water-based
products for optimal results. Pre-set operating time: 5
minutes.
MODE 2
ION MODE
RF+ION+SONIC MASSAGE
Radiofrequency, ion export, and sonic massage
functions are synchronized to deep cleanse the skin.
Prior to using the ION mode, wash your face, then you
may use a toner to further wet your skin. Remove the
magnetic ring on the head of the product, attach a
cosmetic cotton, reattach the ring back onto the device
and spray toner on the cosmetic cotton. Clean your

11
SKINREVERSE®ADVANCED DERMALIFT
face again after operation. Pre-set operating time: 3
minutes.
MODE 3
ELECTROPORATION (ENI) MODE
RF+ENI+RED LED LIGHT+SONIC MASSAGE
Radiofrequency, electroporation, phototherapy,
and sonic massage functions are synchronized to
nourish the skin. Prior to using the ENI mode, wash your
face and use ION mode to deep clean the skin to
prevent the penetration of unknown chemicals into
the cells. Apply skincare products to your face (such
as essence, lotion, serum, cream, moisturizer, mask,
etc.). Please note that clay mask cannot be absorbed
with this product. It is recommended to start with the

12
SKINREVERSE®ADVANCED DERMALIFT
lowest level for the first time. After gradual adaptation,
the appropriate level can be selected according to
the human body feeling. Pre-set operating time: 2
minutes.
MODE 4
ELECTRICAL MUSCLE STIMULATION
(EMS) MODE
RF+EMS+RED/BLUE LED LIGHT+SONIC MASSAGE
Radiofrequency, electrical muscle stimulation,
phototherapy, and sonic massage functions are
synchronized to lift and tone facial muscles. Apply a
conductive gel or a water-based product evenly on
your face. Depending on your sensitivity level, you may

13
SKINREVERSE®ADVANCED DERMALIFT
want to adjust the intensity level and choose one that
allows you to comfortably use this mode for 8 to 15
minutes (lesser time is recommended for those with
milder signs of aging, while those with more
prominent and pronounced signs of aging may use
the device for longer, but not exceeding 15 minutes per
session). Pre-set operating time: 5 minutes.
MODE 5
COOL MODE
COOLING+BLUE LED LIGHT
Cooling and phototherapy are synchronized for
soothing and pore tightening. After completing
"ENI+PHOTON" or "EMS+PHOTON," clean the cosmetics
residue with a cotton cosmetic pad from the head of

14
SKINREVERSE®ADVANCED DERMALIFT
the device.
Choose this mode to calm redness and inflammation,
soothe your skin and shrink the appearance of pores.
Intensity selection is unavailable for this mode, as this
mode has only one pre-set intensity. Since this mode
does not use RF, you can hold the device on the same
spot for 3-10 seconds. The recommended usage time
is 3 to 5 minutes. Pre-set operating time: 2 minutes.

15
SKINREVERSE®ADVANCED DERMALIFT
SUMMARY TABLE
MODE
TECHNOLOGIES
INCORPORATED
SKINCARE
GOAL
USE WITH
PRE-SET
OPERATION
RF
RF
RED LED LIGHT
ANTI-AGING,
STIMULATE
COLLAGEN,
SKIN
REJUVENATION
ANTI-AGING
GELS, WATER
BASED
PRODUCTS,
SERUMS,
MOISTURIZERS
5 min.
ION
RF
ION
SONIC VIBRATION
DEEP
CLEANSING
TONER, MAKE
UP REMOVER
3 min.
ENI
RF
RED LED LIGHT
ENI
SONIC VIBRATION
ENHANCE
PRODUCT
ABSORPTION,
DEEP
PENETRATION
OF ACTIVE
SUBSTANCES
ANTI-AGING
GELS, WATER
BASED
PRODUCTS,
SERUMS,
MOISTURIZERS,
MASKS
2 min.
EMS
RF
RED/BLUE LED
EMS
SONIC VIBRATION
LIFT AND FIRM
FACIAL
MUSCLES
CONDUCTIVE
GELS, ALOE
VERA GEL,
WATER
BASED/OIL FREE
PRODUCTS
5 min.
COOL
COOLING
BLUE LED LIGHT
SOOTHE AND
CALM, SHRINK
PORES
-
2 min.

16
SKINREVERSE®ADVANCED DERMALIFT
USAGE TIPS
IMPORTANT NOTES:
•Always keep the device in motion when in use,
to avoid overheating, skin damage and
discomfort (except cool mode).

17
SKINREVERSE®ADVANCED DERMALIFT
•Always ensure that the area to be treated has
been thoroughly cleaned before use.
•If you plan to use all the modes in one session,
remember to use first, the ION mode, to deep
cleanse the skin, prior to use any other mode.
•This device has been designed to work without
any need for conducting gels, however a
conductive gel helps with conduction-of RF
waves and electrical currents-and gives a good
glide without dragging the skin.
Tip: During an ENI or EMS treatment, whenever a
gel or water-based product starts to dry out,
you can spray on, a thermal spring water
product, to make it slippery again.
•Gently press the device on skin and massage in
circular motion or upward direction.
•Treat neck skin by moving the device slowly
from the lower neck area towards the jawline.
•Use lower intensities (up to level 3) around the
eyes. The device is not suitable to treat the eyes,
the upper or lower eyelid.
•Do not use the device over the Thyroid/Adam’s
apple area.
•The device will switch off automatically if not
used.

18
SKINREVERSE®ADVANCED DERMALIFT
FREQUENCY OF USE
MODE SELECTION/
COMBINATION OF
MODES
TOTAL
SESSION
DURATION
FREQUENCY OF USE
AGE BELOW 40
AGE OVER 40
ION
3-5 MINUTES
EVERY TWO TO
THREE DAYS
EVERY TWO TO
THREE DAYS
ENI
3-5 MINUTES
EVERY NIGHT
AFTER APPLYING
SKINCARE
PRODUCTS
EVERY NIGHT
AFTER APPLYING
SKINCARE
PRODUCTS
RF
5-8 MINUTES
ONCE A WEEK OR
EVERY THREE TO
FOUR DAYS
EVERY TWO TO
THREE DAYS
EMS
5-8 MINUTES
ONCE A WEEK OR
EVERY THREE TO
FOUR DAYS
EVERY TWO TO
THREE DAYS
COOL
2-5 MINUTES
NO LIMIT
NO LIMIT
ION+ENI+EMS+COOL
8-15
MINUTES
EVERY THREE TO
FOUR DAYS
EVERY TWO TO
THREE DAYS
ION+ENI+RF+COOL
8-15
MINUTES
EVERY THREE TO
FOUR DAYS
EVERY TWO TO
THREE DAYS
ION+ENI+COOL
8-10
MINUTES
EVERY TWO TO
THREE DAYS
EVERY TWO TO
THREE DAYS
INTENSITY PER SESSION
UP TO LEVEL 4
UP TO LEVEL 5

19
SKINREVERSE®ADVANCED DERMALIFT
HOW TO CHARGE
•This device is portable after charging.
•Please charge the battery for the first time before
use.
1. Power off the device.
2. Connect the USB cable at
the back of the charging
base or directly at the
bottom of the device.
3. Connect the USB cable to
an electrical outlet.
4. The power icon on the
screen of the product
lights up to indicate that
charging is in progress.
After charging, the power
icon shows full grid.
Remove the adapter from the outlet. If the product
and charger are slightly heated at this time, this is a
normal phenomenon.

20
SKINREVERSE®ADVANCED DERMALIFT
5. Full charge time: about 2 hours
CLEANING AND MAINTENACE
• Before use, please clean the head of the apparatus
with a wet paper towel or cotton pad.
• After use, wipe the magnetic ring and the head with a
cotton pad or soft cloth. Do not flush this product in
water.
• Before cleaning, make sure the product is powered off
and the power adapter is disconnected from the
power supply.
• When cleaning the adapter, make sure to pull it out of