SKLZ PURE PATH User manual

PURE PATH
Thank you for choosing SKLZ PURE PATH. We are dedicated to providing you
with the best tools and instruction possible to help you unleash your athletic
potential. If there is anything else we can do to help you optimize your
workouts, send us an email ([email protected]) or give us a call
(1-877-225-7275).
BEFORE YOU BEGIN:
» Read all setup and usage instructions carefully.
» Recommended for athletes over 14 years old. Athletes under 18 years of
age should use only under strict adult supervision.
» Always check equipment for wear or damage before use. If any is found,
do not use product.
» Make sure you have all the PURE PATH components. Please contact
SKLZ customer service if you’re missing anything.
CARE INSTRUCTIONS:
» Hand wash with vinegar and water.
iCAUTION:
LIMITED
WARRANTY
REGISTER YOUR PRODUCT AT SKLZ.COM TO ENSURE
WARRANTY COVERAGE, GET NEW PRODUCT
INFORMATION AND SPECIAL DEALS FROM SKLZ
Pro Performance Sports (PPS) / SKLZ warrants to the original consumer purchaser of any PPS/SKLZ product it
manufactures that the product will be free of defects in materials or workmanship for 90 days (unless specified in
alternate warranties) from the date of purchase. If defective and purchased from a retail store, return the product
along with receipt to the retail store where the product was purchased. If the item was purchased from PPS/SKLZ,
return the product along with the packing slip (proof of purchase) postage prepaid to the address below for
replacement consideration. Label: Attn: Returns
This warranty does not cover damages resulting from accident, misuse, abuse or lost merchandise. Only valid in
the USA. All returns sent to PPS/SKLZ require a Return Merchandise Authorization number (RMA). For returns to
PPS/SKLZ and for all other Customer Service inquiries, please email [email protected] or call toll free,
1-877-225-7275 for a return authorization number for any exchange.
Made in Taiwan. ©2012 Pro Performance Sports, LLC. All rights reserved. Manufactured and
distributed by SKLZ/Pro Performance Sports: 2081 Faraday Avenue, Carlsbad, CA 92008 U.S.A. SKLZ, SKLZ Pro Grade, SKLZ
Chrome and Sport-Brella are registered trademarks of Pro Performance Sports, LLC., its subsidiaries and affiliates. Product
features, appearance, and specifications may be subject to change without notice. Unauthorized duplication is a violation of
applicable local and international laws.
IDEA SUBMISSION
If you have an idea for a new and innovative sports training product,
visit SKLZ.com to submit your concept. Some restrictions may apply.
VISIT SKLZ.COM FOR
INSTRUCTIONAL VIDEO AND CONTENT
INSTRUCTION MANUAL
SKLZ.COM
GROUND STAKE
ARM ASSEMBLY
PURE PATH PARTS:
Only use the Pure Path in open areas where you wouldn’t be hitting toward
any people, animals, or objects. Never swing a golf club when anyone is in
front of or behind you.
A
B

STEP 1
STEP 1 - SETUP
STEP 3 - ADJUSTMENT
STEP 2 - FEEDBACK
STEP 2
STEP 4
STEP 3
Connect by inserting the arm
assembly into the ground stake.
Select the desired height of the
arm assembly by using the push
button adjustments.
Position your club behind
the ball, keeping the arm
perpendicular to your body
and “target” line.
If you’re hitting an iron or
wedge, the ball should be just
above the ground and the
push button should be set on
the lowest hole.
If you’re hitting a wood
or driver, the ball should
be positioned such that
1/2 to 1/3 of it stays above
the top of your club. The push
button should be set on the
middle or top hole.
If you observe the ball moving too far left or right, you can work on changing your swing path into the ball to straighten out
your shot. Once you start hitting the ball consistently straight, the Pure Path will groove this feel into your normal swing.
Take your normal swing, and
then observe the path the
ball takes as it spins. The ball
will reset itself in position for
your next swing.
Iron or wedge
Slice / Pull
Wood or driver
Straight
Wood or driver Hook / Push
Once the arm assembly is at
the desired height, secure
it in place by tightening the
black knob.
For the desired height,
make sure the ball hangs
straight down from the arm
assembly and spins freely.
It should never rest on the
ground or you will not be
able to observe how the
ball rotates.
Push assembled Pure Path
into the ground until the
stake is fully inserted.
USAGE INSTRUCTION
ASSEMBLY
Only use the Pure Path in open areas where you wouldn’t be hitting toward any people, animals, or objects.
Never swing a golf club when anyone is in front of or behind you.
The Pure Path is a very simple and effective training tool to help golfers learn to hit “pure” shots consistently. By observing the direct result of your ball striking,
you can work on making the necessary adjustments to create a swing path that results in balls that fly straight on the golf course.
CORRECT INCORRECT