Skoda AMUNDSEN+ User manual

SIMPLY CLEVER
Infotainment Navigation Amundsen
Owner's Manual

Structure of this Owner's Manual
(explanations)
This Owner's Manual has been systematically designed to make it easy for you to
search for and obtain the information you require.
At the beginning of this manual you will find a table of contents where all the top-
ics described are arranged sequentially. At the end of this manual you will find an
alphabetical index.
Direction indications
All direction indications such as “left”, “right”, “front”, “rear” relate to the direction of
travel of the vehicle.
Explanation of symbols
Denotes the end of a section.
Denotes the continuation of a section on the next page.
® Denotes a registered trademark.
Notes
WARNING
The most important notes are marked with the heading WARNING. These
WARNING notes draw your attention to a serious risk of accident or injury.
CAUTION
A Caution note draws your attention to the possibility of damage to your vehicle
(e.g. damage to gearbox), or points out general risks of an accident.
Note
A normal Note draws your attention to important information about the operation
of your vehicle.

Preface
You have chosen a ŠKODA vehicle, which is fitted with the Infotainment Navigation Amundsen (hereafter
called the unit) – we thank you for your confidence in us.
The new operating concept allows you to make vehicle settings and to operate electronic systems centrally
from the unit.
Please read this Owner's Manual carefully, because the operation in accordance with these instructions is a
prerequisite for proper use of the unit.
Please note that these instructions are meant only as an addendum to the information presented in the
Owner's Manual of your vehicle. Therefore, they can be used only in conjunction with the latest manual for
this vehicle. For a detailed description of some functions listed in these instructions, see the Owner's Manual
for your vehicle.
If you have any questions about your unit, please contact a ŠKODA Partner.
Your ŠKODA AUTO a.s. (hereinafter referred to as ŠKODA)

Table of Contents
Introductory information
(familiarisation with the unit)
Introductory information 3
Vehicle equipment 3
Safety information 3
Component protection 3
Touch screen 3
Unit overview and operation 5
Unit menus 9
Main menu 9
Unit setup 10
Main menu 10
Sound setup 10
Screen settings 11
Time and date settings 11
Keypad settings 11
Setting more keypad languages 11
Settings for units 11
Settings for voice control 12
Restore factory settings 12
Bluetooth settings®12
Voice control of the unit 13
Introductory information 13
Switching on/off 13
Operation 13
Audio
Radio 15
Main menu 15
Information display 15
Operation 15
Settings 16
Switch on/off traffic programme TP 17
Digital radio reception DAB 17
Media 19
Main menus 19
Information display 19
Select audio source 19
Operating audio sources 20
Track/folder browser 20
Media settings 20
CD 20
Memory card 21
External audio sources 22
Phone
Phone 24
Introductory information 24
Main menu 24
Connecting mobile phone with hands-free
system 25
Speed dialling a telephone number 26
Direct entry of a phone number 27
Phone book 27
Call lists 28
Settings in telephone mode 28
Telephone conversation 28
Information display 29
Navigation
Navigation 31
Preface to navigation 31
Operation 32
Main menu 33
Set-up 34
Navigation settings 34
Map display 35
Split screen 37
Navigation 40
Entering a new destination 40
Entering from stored destinations 41
Special destinations 42
Route guidance 45
Destination management 48
Stopover 48
Destination details 48
Traffic programme (TRAFFIC) 50
Traffic (TMC) 50
Dynamic route on/off 50
Traffic report details 50
Setting vehicle systems
Setting vehicle systems 51
Main menu 51
Vehicle data 51
Auxiliary heater and ventilation 52
Vehicle settings 52
Other functions 56
Introductory information 56
Selecting driving mode 56
Climatronic settings 57
Index
2Table of Contents

Introductory information (familiarisation
with the unit)
Introductory information
Vehicle equipment
These operating instructions describe all possible equipment variants without
identifying them as special equipment, model variants or market-dependent
equipment.
Consequently, this vehicle does not need to contain all of the equipment compo-
nents described in these operating instructions.
The level of equipment of your vehicle refers to your purchase contract of the ve-
hicle. For more information, contact your local ŠKODA retailer.
The illustrations can differ in minor details from your vehicle; they are only inten-
ded for general information.
Note
High volumes can cause sound resonance in the vehicle. 
Safety information
WARNING
■Concentrate fully at all times on your driving! As the driver you are fully re-
sponsible for the operation of your vehicle. Only use the device such that you
are in full control of your vehicle in every traffic situation - risk of accident!
■Adjust the volume to ensure that acoustic signals from outside, e.g. sirens
from vehicles which have the right of way, such as police, ambulance and fire
brigade vehicles, can be heard at all time.
■High volumes can cause hearing damage! 
Component protection
Some electronic control units are factory-equipped with component protection.
The component protection was developed as a protection mechanism for:
›impairment of factory- or garage-fitted control units after installation in another
vehicle (for example, after a theft);
›impairment of components operated outside of the vehicle;
›the possibility of a legitimate installation or change of control units for repairs
at a ŠKODA specialist garage.
When the component protection is enabled, the following message appears on
the display of the device Component theft protection: the infotainment system
is not fully available at present. Please switch on the ignition.
If the component protection does not activate by switching on the ignition,
please contact a ŠKODA specialist garage. 
Touch screen
The unit is equipped with a so-called touch screen which can only be operated by
the touch of a finger.
CAUTION
■The screen can be operated by a slight touch of a finger. Do not apply pressure
to the screen - risk of damage!
■Do not use any objects to operate the screen - risk of damage!
■Do not use solvents such as benzene or turpentine for cleaning, since they may
damage the screen surface.
Note
■Use a soft cloth and, if necessary, methylated spirits, to remove fingerprints
from the screen. When doing so, ensure that you do not cause damage to other
parts of the interior.
■It is not possible to operate the screen with your fingernails or while wearing
gloves.
■Do not affix anything to the area of the unit below the screen. This could affect
the functioning of the sensors for the “zoom effect”. 
3
Introductory information

■To protect the screen, you can use a suitable screen protector for touchpads
that does not affect the function of the touch screen.
■The brightness of the screen is adjusted automatically depending on the bright-
ness of the interior lighting. The automatic setting can be adjusted manual-
ly » page 11.
4Introductory information (familiarisation with the unit)

Unit overview and operation
Unit overview
Fig. 1 Unit overview
Unit overview
 - Unit on/off, adjust volume
Operation and confirmation
RADIO - Radio menu » page 15
MEDIA - Media menu » page 19
PHONE - Phone menu » page 24
VOICE - Voice control » page 13
NAV - Navigation Menu » page 31
TRAFFIC - List of traffic reports » page 50
CAR - Settings of the vehicle systems » page 51
MENU - Displays the unit menus » page 9
Touch screen » page 6
1
2
3
4
5
6
7
8
9
10
11
Note
■Some functions can be operated via the multifunction steering wheel » Vehicle
Owner's Manual, chapter Communication or the rocker switch in the multifunc-
tion lever » Vehicle Owner's Manual, chapter Instruments and warning lights.
■Some information and features are shown on the display of the instrument
cluster. 
Switching the unit on/off
›Press the knob  to switch the unit on or off.
After switching on the unit, the last audio source and operating mode that was
active before switching off will be played.
If telephone mode was active before you switched off the unit and the ignition
and Bluetooth® function is not switched on, the unit displays the mes-
sage » page 24. Switch on the ignition or the Bluetooth® function» page 12.
If the vehicle key is pulled out of the ignition lock while the unit is switched on,
the unit will switch off automatically. After switching on the ignition, the unit is
turned on automatically.
The unit does not turn on automatically when the ignition is switched on if it was
turned off with the adjustment knob .
If your vehicle is fitted with the KESSY system, the unit will switch off automati-
cally after the engine is turned off and the door opened. If you open the driver's
door before switching off the engine, the unit will also switch off.
When the ignition is switched off, the system switches off automatically after ap-
prox. half an hour (discharge protection of the vehicle battery). 
Adjusting the volume
Increase volume
›Turn the knob  to the right.
Decrease volume
›Turn the knob  to the left. 
5
Introductory information

Note
■The volume change is displayed on the screen of the unit.
■When the sound is muted, the symbol  appears in the display. 
Screen display and control of the unit
Fig. 2
Screen display
Screen areas which confirm a function or a menu are called “function keys”.
White or green function keys are active.
Greyed out function keys are not active.
Status line
In the main menu of some operating modes, the upper screen area contains a sta-
tus line displaying time details and the external temperature, as well as informa-
tion on the currently selected operating mode.
Function keys in the main menu
In the main menu of some operating modes, the lower screen area contains func-
tion keys with symbols for functions or menus. When you move your finger to-
wards this screen area, the unit displays the names of the function keys along-
side the symbols.
Explanation of graphic
Currently selected menu
 - Return to the higher-level menu
Function with “checkbox” 
Scroll bar - Shows the position in the menu; touch the scroll bar to navigate
the menu
Menu item with “pop-up window” 
A
B
C
D
E
Selecting menu/menu item
›Drag your finger over the screen in the required direction
›Turn the menu knob 2 » Fig. 1 on page 5
If you make the selection by turning the menu knob 2, the currently selected
menu is highlighted in green.
Confirming menu/menu item
›Touch the function key with your finger
›Press the menu knob 2
Returning to the higher-level menu:
Context-dependent
›By pressing ;
›By pressing the relevant button next to the screen;
›By touching the screen outside of the pop-up window with your finger.
Switching function on/off with “checkbox”
Press the relevant function key
› - Function is switched on.
› - Function is switched off
Set value
›Touch the function keys /, /, -/+
›Touch or move your finger over the scale
Note
For some menus or menu items, the current setting is displayed, e.g. Distance: km
or Distance: mi.
Examples of the information listed in the Owner's Manual
Examples of actions
›Press the button RADIO → .
This information indicates that you must first press the RADIO button on the unit
and then confirm the function key  on the screen.
The “→” symbol indicates the next step.
This may be followed by a list of available menus, menu items or functions, such
as: 
6Introductory information (familiarisation with the unit)

■Sound - Sound setup
■Volume - Volume setting
■Bass - Mid - Treble - Sets the bass, mid and treble
■Balance - Fader - Sets the balance between left and right, front and rear
Example menu
■xyz - the first menu level
■xyz - the second menu level
■xyz - the third menu level
■xyz - the first menu level 
Input screen with keypad for search
Fig. 3
Input screen for the search
The input screen with keypad is used to find entries in the unit memory (e.g.
phone contacts, addresses, etc.).
By pressing the function key with the corresponding character on the keypad of
the input screen, this character appears in the text line A.
Only those letters or symbols making up a logical entry will be available. Do not
forget to enter the blank space in names made up of more than one word, such
as Lorem Ipsum. It is not necessary to enter the entries including special charac-
ters (diacritics).
The search for the most relevant terms is already initiated while you are entering
characters. Therefore, it is not necessary to enter the entire entry name.
In addition to the text line A, the number of matching entries is shown in the
function key B.
The number 1-99 indicates the number of matching entries that were found. If
even more entries were found, ** is indicated instead of a number. If less than 6
entries were found, a list of the found entries opens automatically.
Description of the function keys
Button Description
Returns to the higher-level menu
Displays a menu with selected entries, indicates the number of
matching entries
Deletes previous characters in the text line
Toggles between upper case and lower case characters
Displays the character set of the additional keypad lan-
guage » page 11
123 Switches to numeric and special character input
Switches to special characters
ABC Switches to letters
Enters a blank
OK/ CConfirm the text entered in the input line, or use C to start
searching for a stored entry 
Input screen with keypad for storing
Fig. 4
Input screen for storing
For the entry procedure and the description of the function keys, see » page 7,
Input screen with keypad for search.
The input screen with keypad is used for free text entry, e.g. for entering a name.
If there is already an entry in the text line A, it can be edited before storing.
›The entry is stored in the unit memory by pressing the function key B.
›The function keys </> are used to move the cursor within the text line. 
7
Introductory information

Input screen with numeric keypad
Fig. 5 Input screen with numeric keypad
The input screen with keypad is used for number entry » Fig. 5.
 - Input screen in phone mode » page 27 .
 - Input screen in navigation mode
Description of the function keys in navigation mode:
Button Description
Returns to the higher-level menu
Deletes characters in the text line
ABC Switches to letters » page 7
§&# Switches to special characters
Enters a street crossing
OK Confirm the text entered in the input line, or use C to start
searching for a stored entry 
8Introductory information (familiarisation with the unit)

Unit menus
Main menu
Fig. 6
Unit menus: Main menu
First and foremost, pay attention to the safety instructions » page 3.
Select and confirm all functions as described at the beginning of this man-
ual » page 5.
Call up the main menu
›Press the button MENU .
Function keys in the MENU main menu
Button Description
Radio menu » page 15
Media menu » page 19
Sound Setup » page 10
Unit setup » page 10
Vehicle system settings » page 51
Navigation menu » page 31
Phone menu » page 24 
9
Unit menus

Unit setup
Main menu
Fig. 7
Unit settings: Main menu
First and foremost, pay attention to the safety instructions » page 3.
Select and confirm all functions as described at the beginning of this man-
ual » page 5.
Call up the main menu
›Press the button SETUP .
Menus in the main menu for unit setup
■Sound - Sound setup » page 10
■Screen - Screen settings » page 11
■Time and date - Time and date settings » page 11
■Language - Defines the menu language for displays
■Keypad: - Keypad display for text entry » page 11
■More keypad languages - Enables you to enter characters other than those valid for
the selected language
■Units - Settings for units of measurement » page 11
■Voice control - Settings for voice control » page 12
■Remove SD card 1 safely - Safe removal of the SD card from slot 1
■Remove SD card 2 safely - Safe removal of the SD card from slot 2
■Remove USB device safely - Safe removal of USB device
■Factory settings - Reset to factory settings » page 12
■Bluetooth - Settings for the Bluetooth® function » page 12
■System information - Displays system information
■Device part number: - Part number of the unit
■Hardware: - Hardware used
■Software: - Software version
■Navigation database: - Version of the navigation data
■Copyright info - Information on licences and copyrights used (only displayed in
English) 
Sound setup
Fig. 8 Sound setup
›Press the button SETUP → Sound or the button SOUND .
■Volume - Volume setting
■Announcements - Set the volume for the traffic program alerts (TP)
■Navigation announcements - Set the volume of the navigation announcements
■Voice control - Sets the volume for the voice control
■Maximum switch-on volume - Sets the maximum volume after switching on
■Volume adjustment (GALA) - Speed-dependent volume increase
■Telephone - Sets the telephone volume
■iPod volume - Sets the volume for the connected iPod
■Quiet - Low volume
■Medium - Medium volume
■Loud - High volume
■AUX volume - Sets the volume for the device connected via AUX
■Quiet - Low volume
■Medium - Medium volume
■Loud - High volume
■Bluetooth audio - Sets the volume of the connectedd Bluetooth® device
■Quiet - Low volume
■Medium - Medium volume
■Loud - High volume 
10 Introductory information (familiarisation with the unit)

■Audio lowering: - Setting the reduction of the volume when the park distance
control is active
■Off - switches off
■Weak - weak reduction
■Medium - medium input sensitivity
■Strong - strong reduction
■Bass - Mid - Treble - Sets the bass, mid and treble
■Balance - Fader - Sets the balance between left and right, front and rear
■Confirmation tone - Switches confirmation tone on/off by pressing a function sur-
face
■No navigation sound during call - Switch on/off navigation announcements during a
telephone call (using a phone connected to the hands-free system)
■Subwoofer - Subwoofer volume settings
■CANTON advanced setup - Settings of the Canton system
■Select equaliser sound - Equaliser settings
■Music - Music
■Language - Language
■Sound focus: - Set the sound perception for different zones in the vehicle inte-
rior
■Off - Settings apply to the whole vehicle
■Front - Optimised setting for the front occupants
■Driver - Optimised setting for the driver
■CANTON Surround - Virtual surround system (active during media playback) 
Screen settings
›Press the button SETUP → Screen .
■Switch off display (in 10 seconds) - Switch the display to energy-saving mode1)
■Brightness - Adjusts the brightness of the screen
■Brightest - brightest level
■Brighter - brighter level
■Medium - medium input sensitivity
■Darker - darker level
■Darkest - darkest level
■Confirmation tone - Switches confirmation tone on/off by pressing a function sur-
face
■Show clock in standby mode - Time and date displayed on the screen when the igni-
tion is switched on and the unit is switched off 
Time and date settings
›Press the button SETUP → Time and date .
■Clock time source: - Set the time (manually or by GPS)
■Time: - Time settings
■Summer (DST) - Switches the summer time setting on/off
■Time zone: - Select the time zone
■Time format: - Set the time format (12h or 24h)
■Date: - Date settings
■Date format: - Set the date format 
Keypad settings
›Press the button SETUP → Keypad .
■ABC - keys arranged alphabetically
■QWERTY - Arrangement of the keys as per the QWERTY system 
Setting more keypad languages
›Press the button SETUP → More keypad languages .
The characters for the languages selected in this menu can be selected in the in-
put screen with keypad by pressing  » page 7.
Settings for units
›Press the button SETUP → Units .
1) The screen will turn black if you do not activate it within 10 seconds, either by approaching the
screen, touching the screen, or pressing menu button 2 » Fig. 1 on page 5. You can switch the dis-
play back on again by approaching it, touching it, or operating the menu knob 2.
11
Unit setup

■Distance: - Distance units
■km - Kilometres
■mi - Miles
■Speed: - Speed units
■km/h - Kilometres per hour
■mph - Miles per hour
■Temperature: - Temperature units
■°C - Degrees Celsius
■°F - Degrees Fahrenheit
■Volume: - Volume units
■l - Litres
■gal (US) - Gallons (US)
■gal (UK) - Gallons (UK)
■consumption: - Consumption units
■l/100km - Litres per 100 kilometres
■km/l - Kilometres per litre
■mpg (US) - Miles per gallon (US)
■mpg (UK) - Miles per gallon (UK)
■Gas consumption: - Gas consumption units
■kg/100km - Kilograms per 100 km
■km/kg - Kilometres per kilogram
■m3/100 km - Cubic metres per 100 kilometres
■km/m3 - Kilometres per cubic metre
■Pressure: - Pressure units for tyre pressure
■kPa - Kilopascal
■bar - bar
■psi - Pounds per square inch 
Settings for voice control
›Press the button SETUP → Voice control .
■Dialogue style: Setting the dialogue style
■Long - Long dialogue (the system plays complete acoustic messages)
■Short - Short dialogue (the system shortens some acoustic messages or sub-
stitutes them with an acoustic signal)
■Display available commands - Switch on/off the menus containing basic voice com-
mands when voice control is activated
■Voice control session start tone - Switch on/off the audible signal that is output
when voice control is activated
■Voice control session end tone - Switch on/off the audible signal that is output when
voice control is ended
■Input tone in voice dialogue - Switch on/off the audible signal that is output to sig-
nal that voice control is waiting for a command 
Restore factory settings
›Press the button SETUP → Factory settings .
■Restore factory settings - Reset the unit to all factory settings
■Sound - Restore default settings for sound
■Radio - Restore default settings for radio
■Vehicle - Restore default settings for the vehicle systems
■Telephone - Restore default settings for phone
■Media - Restore default settings for media
■Voice control - Restore default settings for voice control
■Navigation - Restore factory settings
■Bluetooth - Restore default settings for the Bluetooth® function
■System - Restore the system default settings 
Bluetooth settings®
›Press the button SETUP → Bluetooth .
■Bluetooth - Bluetooth® function on/off
■Visibility: - Switch on/off the visibility of the Bluetooth® device for other devices
■Visible - Visibility is always on
■Hidden - Visibility is off
■At start-up - Turns on visibility for 5 minutes after switching on the ignition or
until the driving speed has exceeded 5 km/h
■Forename: - Open the input screen with keypad - changing the name of your
hands-free system
■Paired devices - Display the list of paired Bluetooth® devices; connect or delete a
paired device; delete the list of paired devices
■Delete all - Delete all paired Bluetooth® devices
■ - Delete the paired Bluetooth® device
■Find devices - Searches for available external devices with enabled Bluetooth®
functions and activated visibility
■Bluetooth audio (A2DP/AVRCP) - Switch on/off the connection option for Bluetooth®
profiles A2DP and AVRCP1) 
12 Introductory information (familiarisation with the unit)

Voice control of the unit
Introductory information
You can use voice control only in phone or navigation mode. Voice control set-
tings » page 12.
The period of time during which the system is ready to receive voice commands
and to carry them out is called a dialogue. The system gives audible feedback and
guides you if necessary through the relevant functions.
The microphone for voice control is inserted in the moulded headliner and direc-
ted to the driver and front passenger. Therefore the driver and the front passen-
ger can operate the equipment.
Voice control symbols
Symbol Description
The system plays an acoustic message.
The system is waiting for a voice command.
Voice command entry was stopped.
Briefly pressing the VOICE or  button on the multifunction steering wheel dur-
ing an acoustic message terminates it, and a voice command is expected. It is not
necessary to wait for the end of message playback. The input is therefore faster. 
Switching on/off
Switching on voice control
›Briefly press the button VOICE on the unit.
›Briefly press the button  on the multifunction steering wheel.
Switching off voice control
›Press the button VOICE on the unit for a long time, or press it twice.
›Press the button  on the multifunction steering wheel for a long time, or
press it twice.
›Touch the screen with your finger (any part of the screen with the exception of
the function key ).
›Press a button on the unit (with the exception of brief pressing of the button
VOICE ).
›By speaking the voice command Cancel voice control.
Operation
Voice commands
After turning on voice control, a menu with basic voice commands for the given
operation is displayed on the screen. You can switch this menu on and
off » page 12.
Only give voice commands when the symbol  is displayed on the device screen
or in the information display.
The ability to say a voice command can also be displayed by using acoustic sig-
nals. The acoustic signals can be switched on/off » page 12.
When you give the voice command Help, the unit displays a menu containing pos-
sible voice commands. Repeating the voice command Help will cause the unit to
display the second part of the help menu, if applicable.
When you give the voice command Start tutorial, the unit plays one of the seven
parts of the voice control tutorial.
With the voice command, you can turn on the green-highlighted function keys
(operation in the manner “Say what you see”). For example, you can turn on the
function key Dial number with the voice command Dial number.
Ability to give a new voice command
If, for example, you give an incorrect voice command and the  symbol is still dis-
played, you can start the voice command again.
A new voice command input can be done in one of the following ways:
›by briefly pressing the button VOICE on the unit;
›by briefly pressing the button  on the multifunction steering wheel.
The unit displays the  symbol again and you can give a new voice command.
Stopping voice command input
In some menus, the procedure for entering voice commands can be stopped by
turning the knob 2 » Fig. 1 on page 5. 
1) A2DP and AVRCP are Bluetooth® profiles that support multimedia functions.
13
Voice control of the unit

The symbol displayed on the device screen or in the information display changes
from  to .
Restarting voice command input
The procedure for voice command input can be restarted in one of the following
ways:
›by pressing the function key ;
›by briefly pressing the button VOICE on the unit;
›by briefly pressing the button  on the multifunction steering wheel.
Voice command not recognised
If a voice command is not recognised, the system answers with “Sorry?” and you
can give a new command.
If the system does not recognise the second voice command, the help message is
provided again and you can give a new command.
If even the 3rd. voice command is not recognised, the system plays the message
“Voice control cancelled” and the dialogue is closed.
Optimum understanding of the voice commands depends on several factors.
›Speak with a normal tone of voice without intonation and excessive pauses.
›Avoid a bad pronunciation.
›Close the doors, windows and sliding roof, to reduce or stop disturbing exterior
noise.
›It is recommended to speak louder at higher speeds, so that the tone of your
voice is louder than the increased surrounding noise.
›During the dialogue, limit additional noise in the vehicle, e.g. passengers talking
at the same time. 
14 Introductory information (familiarisation with the unit)

Audio
Radio
Main menu
Fig. 9
Radio: Main menu
First and foremost, pay attention to the safety instructions » page 3.
Select and confirm all functions as described at the beginning of this man-
ual » page 5.
Call up the main menu
›Press the button RADIO .
Explanation of graphic
ASelected radio station
BFunction keys used to select a station stored in the preset list
CFunction keys used to scroll through the list of stored radio stations
DFunction key used to select the frequency band
Selecting a radio station from the station list
Manual station search using the function keys  and  or using the slid-
er
Radio settings
Symbols in the display
Symbol Description
Sound is muted
 Traffic information station
  Station without traffic information
Radio station from the station list is a station from the preset list
Selected radio station
  RDS function is switched off 
Information display
The Audio mode menu opens after confirming by Audio in the main menu that is
displayed in the information display of the instrument cluster.
The operation of this menu follows » Vehicle Owner's Manual, chapter Informa-
tion Display.
Displayed information:
■current frequency band of the radio station;
■currently playing station of receivable radio stations in the given frequency
band if less than 5 are receivable;
■if more than 5 stations can be received, a list of receivable radio stations is dis-
played with an option to choose one of them;
■TP traffic announcements. 
Operation
Selecting a frequency band
›Press the button RADIO → D or press the button RADIO repeatedly.
FM - FM frequency band
AM - AM frequency band
DAB - Digital radio reception » page 17
Station finding
›Press the button RADIO → .
Storing radio stations in the preset list
›Tune in the desired radio station. 
15
Radio

›Press and hold the corresponding function key B» Fig. 9 on page 15 until you
hear an acoustic signal
or
›Press and hold the desired station in the station list.
A list of function keys B will be displayed.
›Press the corresponding function key B.
Storing radio stations automatically in the preset list
The system allows you to store 15 radio stations with the strongest signal.
›Press and hold the button RADIO until the message Autostore ... is displayed.
If any radio stations are already stored in the memory list, they are replaced by
new preset stations.
Selecting a stored radio station from the preset list
15 presets are available in each frequency band (AM, FM, DAB).
›Press the button RADIO → and the function key of the desired radio sta-
tion » Fig. 9 on page 15.
Selecting a radio station from the station list
›Press the button RADIO →  or / and select the desired radio station.
 - Update the list of stations (only for the AM frequency band)
If no station list is available, the device will automatically search for radio sta-
tions. 
Settings
›Press the button RADIO → .
■Sound - Sound setup » page 10, Sound setup
■Scan - Auto-play all stations in the current frequency band, each station for
around five seconds. Press again to stop the auto-play function at the current
radio station.
■Arrow buttons: - Set the function of the station selection in radio mode
■Preset list - Switches to only stored stations
■Station list - Switches all stations currently in range for the selected frequency
band
■Traffic programme (TP) - Switches traffic programme on/off
■Preset list - Deletes the stored stations
■ - Delete a radio station
■ Delete all - Delete all stored stations
■Station logos - Use the station logo stored on the SD card or USB data medium1)
■Radio text - Radio text display on/off
■Advanced setup - Set an alternative frequency and the RDS
■Alternative frequency (AF) - Search for alternative frequencies of the station cur-
rently being listened to on/off
■Radio Data System (RDS) - Switches on/off the RDS function
■RDS Regional: - Switch on/off the automatic tracking of related regional sta-
tions
■Fixed - Maintains the selected regional station continuously. When the sig-
nal is lost, another regional station must be set manually.
■Automatic - Auto-selects the station with the best reception at the moment.
If you lose reception the region, the unit will automatically set another avail-
able region.
RDS (Radio Data System)
The RDS function is used to transmit program IDs and additional services, thus
enabling automatic station tracking, for example. In the event of sufficiently sat-
isfactory reception, the suitable RDS radio stations will display the station name
instead of the station frequency.
In countries where the RDS function is not supported sufficiently, we recommend
turning off the RDS and AF functions. When the RDS and AF functions are switch-
ed on, they may affect the functionality of the radio.
AF (Alternative Frequency)
The AF function ensures that the best receivable frequency of the selected sta-
tion is automatically and precisely set.
DAB (Digital Audio Broadcasting)
DAB is the digital transmission of radio programmes based on the DAB, DAB+ or
DMB standards. It allows multiple stations to be transmitted in a single frequency
in the form of a so-called ensemble.
It also allows for the transmission of additional data and information (e.g. mes-
sages, sport, weather, warnings, etc.). 
1) The following image formats are supported: jpg, jpeg, png, bmp, tiff gif.
16 Audio

Switch on/off traffic programme TP
Depending on equipment fitted:
›Press the button TP .
›Press the button RADIO →  → Traffic programme (TP) .
Traffic monitoring is indicated by the letters  in the display.
While playing in Media mode, the last selected radio station continues to be re-
ceived in the background if it supports traffic information. If a radio station is set
that does not support TP, the most appropriate TP station is set automatically in
the background to continuously receive traffic reports in the media.
The radio works the same in a selected AM frequency range. If no traffic pro-
gramme station can be found because, for example, radio reception is interrupted
in general, No TP will be displayed instead of TP.
Note
TP (traffic program identification) - Traffic information identification - the selec-
ted radio station broadcasts the TP signal (traffic radio). 
Digital radio reception DAB
Main menu
Fig. 10 DAB: Main menu
First and foremost, pay attention to the safety instructions » page 3.
Select and confirm all functions as described at the beginning of this man-
ual » page 5.
Call up the main menu
›Press the button RADIO → DAB .
Explanation of graphic
Selected DAB radio station
Function keys used to select a DAB radio station stored in the list
Function keys used to navigate in the menu of stored DAB radio stations
Symbols in the display
Symbol Description
Sound is muted
Radio station from the station list is a station from the preset list
Selected DAB radio station
DAB signal is unavailable
DAB radio station with slideshow
Note
In regions without DAB coverage, the following symbol appears in DAB Radio
mode .
Operation
Station finding
›Press the button RADIO → .
Storing radio stations in the preset list
›Set the desired radio station or press and hold the desired station in the station
list → press and hold the corresponding function key B » Fig. 10 on page 17
until a beep is heard.
Selecting a stored radio station from the preset list
15 presets are available in each frequency band (AM, FM, DAB).
›Press the button RADIO → and the function key of the desired radio station.
Selecting a radio station from the station list
›Press the button RADIO →  or / and select the desired radio station.
 - Update the list of stations 
A
B
C
17
Radio

If no station list is available, the device will automatically search for radio sta-
tions.
Example of a DAB station list
■XYZ - an ensemble of DAB stations
■XYZ - DAB station with the name XYZ
■XYZ  - DAB station with the name XYZ which is currently not in range
■XYZ (FM) - DAB station with the name XYZ which is currently only in range in
the FM frequency band
■XYZ (DAB) - DAB station with the name XYZ which is currently only available in
another ensemble of DAB stations 
Station information
Fig. 11
Station information
›Press the button RADIO → DAB → .
■Preset list - Display only stored DAB stations
■Station info. - Display DAB station information (e.g., station name, group, or pro-
gramme type) in the form of radio text and images1)
■Radio text - Display radio text
■Slide show - Display slideshow 
Set-up
›Press the button RADIO →  → Advanced setup .
■DAB traffic announcements - Switches on/off DAB announcements
■Other DAB announcements - Switch on/off other announcements (e.g., warnings, re-
gional weather, sports reports, financial news)
■DAB - DAB station tracking - Switch on/off automatic DAB station tracking in other
groups
■Automatic DAB - FM switching - Switches on/off auto-switching from DAB to the FM
frequency band if the DAB signal is lost
■L-band - Switches on/off the automatic DAB station search in L-band
DAB programme tracking
If a DAB station is a member of several ensembles, when the signal is poor, the
same station is searched in a different ensemble.
Auto-change DAB -FM
If the DAB signal is poor, the unit will try to find a corresponding FM station for
the DAB station you are currently listening to.
For auto-change to work, the DAB and FM stations must send a sender ID.
While the station is being received via the FM frequency band, (FM) will appear
next to the station name . When the corresponding DAB station is in range again,
the (FM) display disappears.
If a DAB station is also not available in the FM frequency band due to poor recep-
tion, the radio will be switched to mute.
If you do not want automatic station change (e.g. when driving through tunnels,
when reception may be lost temporarily), you can deactivate this func-
tion » page 18.
1) If you touch the screen in the area where information of DAB stations are displayed, the screen will
only display this information. If you touch the screen in the area of the displayed image, only images
will be displayed on the screen.
18 Audio