Skoda AMUNDSEN+ User manual

RADIO NAVIGATION SYSTEM AMUNDSEN+
OWNER'S MANUAL
Radionavigační systém Amundsen+
Fabia, Roomster, Yeti, Octavia, Superb anglicky 05.11
S00.5610.79.20
3T0 012 149 DS
www.skoda-auto.com

Introduction
You have chosen a Škoda vehicle, which is fitted with the radio navigation system Amundsen+ (hereafter
called the radio navigation system) - we thank you for your confidence in us.
We recommend that you read these operating instructions carefully so that you can quickly become familiar
with your radio navigation system.
Should you have any questions or problems with your radio navigation system, please do not hesitate to
contact your authorised Škoda Service Partner or importer.
National legal provisions, which deviate from the information contained in these operating instructions, take
precedence over the information contained in the operating instructions.
We hope you enjoy using your radio navigation system and wish you pleasant motoring.
Your Škoda Auto
s39o.5.book Page 1 Wednesday, April 20, 2011 10:11 AM

Contents2
Contents
General information . . . . . . . . . . . . . . . . .
Owner's Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . .
Important information . . . . . . . . . . . . . . . . . . . . . . . .
Equipment overview . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the unit on and off . . . . . . . . . . . . . . . .
Setting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating the display . . . . . . . . . . . . . . . . . . . . . . . . .
Input screen with keypad . . . . . . . . . . . . . . . . . . . .
Basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
System and sound settings . . . . . . . . . . . . . . . . . .
RADIO mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital radio DAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Traffic Program TP . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MEDIA mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main menu MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General information for CD operation . . . . . . .
Inserting and removing the memory card . . .
External sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Requirements for media sources and audio files
PHONE mode . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect mobile phone or Bluetooth® device to
navigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings in PHONE mode . . . . . . . . . . . . . . . . . . . . .
NAV mode (Navigation) . . . . . . . . . . . .
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TMC display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying TMC traffic reports . . . . . . . . . . . . . . .
Settings TMC traffic reports . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3
3
3
5
5
5
5
6
8
8
9
9
9
10
11
11
12
12
12
14
15
15
15
17
18
18
20
22
24
24
24
25
s39o.5.book Page 2 Wednesday, April 20, 2011 10:11 AM

General information 3
General information
Owner's Manual
This Owner's manual describes all possible equipment variants without identifying
them as special equipment, model variants or market-dependent equipment.
Consequently, this vehicle does not need to contain all of the equipment compo-
nents described in this Owner's manual.
The scope of equipment for your vehicle is described in the sales documentation
you were given when purchasing the car. More information is available from your
Škoda dealer.
Explanation of symbols
End of a section.
The section is continued on the next page.
→Go to next button.
Important information
Safety information
WARNING
•Concentrate fully at all times on your steering! As the driver you are fully
responsible for road safety. Only use the system so that you are in full control of
your vehicle in every traffic situation - risk of accident!
•Adjust the volume to ensure that acoustic signals from outside, e.g. sirens
from vehicles which have the right of way, such as police, ambulance and fire
brigade vehicles, can be heard at all time.
•High volumes can cause hearing damage.
•For further safety information see page 18, “Safety instructions for the
operation of the navigation system”.
Warranty
The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair can be
replaced with a reconditioned, original item with spare part warranty. It is, however,
a precondition that the housing has not been damaged and no unauthorised
attempts have been made to carry out repairs.
Note
The warranty does not relate to:
•Damage and defects due to improper handling of the equipment,
•Damage and defects from unprofessional repair attempts,
•Devices with damage to the exterior.
Cleaning the display
Caution
•Do not use solvents such as turpentine or petrol as they may corrode the display
surface.
•Carefully handle the display because dents and scratches can occur through
pressure of the finger or contact with sharp objects.
Note
The display can be cleaned with a soft cloth and finger marks can be wiped away
with pure alcohol.
Signal receipt
Car parks, tunnels, tall buildings or mountains can disrupt the radio and GPS signal
even causing it to fail completely.
s39o.5.book Page 3 Wednesday, April 20, 2011 10:11 AM

General information4
Anti-theft protection
The anti-theft coding of your radio navigation system prevents an operation of the
system after a voltage interruption, e. g. owing to vehicle repair or theft. After
disconnecting the battery, disconnecting the radio navigation system from the on-
board voltage of the vehicle or after a fuse failure, the code must be entered before
the system can be used again. The code number can only be called up “online” via
the Škoda system, as this guarantees even more effective anti-theft protection.
Please contact your authorized Škoda Service Partner, if necessary.
Enter code
If a keypad appears after switching on with the command to enter the code, the unit
must be unlocked by entering the correct four-digit code.
– Enter the four-digit code using the function keys to . The digit is accepted
in the entry line.
After a four-digit order has been entered, the group of digits will turn grey (inactive)
and no further digits can be accepted in the entry line.
– To delete the numbers in the entry line from right to left, press the function key
.
– If the correct code is displayed in the entry line, press the function key .
Incorrect code number
If an incorrect code is confirmed after entry of the code, the procedure can be
repeated twice. The number of possible attempts is shown in the bottom display
line.
If the code is entered incorrectly for the third time, the unit will be blocked for
approx. one hour. It is not possible to enter the safety code again until after one
hour, while the unit and the ignition were switched on.
If three invalid attempts are then made again, the radio navigation system will be
blocked again for an hour.
Note
The code is normally saved in the instrument cluster memory. This ensures that it is
automatically decoded (convenience coding). Manual input of the code is normally
not necessary.
Special functions
Parking aid
If your vehicle is equipped with a “parking aid” and after it is activated, the distance
to the obstacle is shown in the display.
Climatronic
If you vehicle is equipped with Climatronic, information from Climatronic is shown in
the display.
Personalisation
Your vehicle can be equipped with up to four keys. Individual settings of the radio
navigation system area always assigned to the key currently in use. Up to 4
different setting variants can be stored for the radio navigation system. When using
the key for the first time, the factory setting on the radio navigation system is
valid.
0
9
Delete
OK
s39o.5.book Page 4 Wednesday, April 20, 2011 10:11 AM

General information 5
Equipment overview
- Button
−for switching the equipment on and off (press)
−Volume control (rotate) page 5, “Setting the volume”
- Radio operation page 9, “RADIO mode”
- MEDIA operation page 11, “MEDIA mode”
- Telephone operation page 15, “PHONE mode”
- Navigation operation page 18, “NAV mode (Navigation)”
- Displaying TMC traffic alerts page 24, “Displaying TMC traffic
reports”
- Settings in the individual operating modes page 8, “Basic
settings”
and - buttons for moving forwards/backwards
CD case page 12, “General information for CD operation”
Display page 5, “Operating the display”
- Ejecting CD page 12, “General information for CD operation”
- Additional information and functions depending on the current
operating mode
- Return to previous menu item
AUX socket - to connect an external audio source page 12, “Input
AUX”
Menu button:
−Select a function or a sub-menu, confirm a value (press)
−Move between functions or sub-menus, set a value (turn)
Memory card case page 12, “Inserting and removing the memory
card”
Function keys - Function is context-dependent
Switching the unit on and off
– To switch the unit on/off, press the button .
After switching on the unit, the last audio source that was active before switching
off will be played.
If the key is pulled out of the ignition lock while the unit is switched on, the unit will
switch off automatically.
If your vehicle is fitted with the KESSY system, the unit will switch off automatically
after the engine is turned off and the door opened. If you open the door before
turning off the engine, the unit will not switch off until the vehicle is locked.
If the ignition is switched off, the system switches off automatically after approx.
half an hour (vehicle battery protection against discharging).
Setting the volume
– To increase the volume, turn the button to the right.
– To reduce the volume, turn the button to the left.
The change to the volume appears in the unit display.
If the volume is reduced to 0, the speakers are muted. The following symbol will
appear in the display .
Caution
High volumes can cause hearing damage.
Operating the display
The display of the unit is a so-called “Touchscreen”. Areas of the display with a
coloured border are presently “active” and can be operated by touching the display
or by pressing the corresponding button page 5, “Equipment overview”.
Some of the functions of the radio navigation button can be operated using the
multifunction steering wheel, refer to the Owner's manual for your vehicle.
A
1

A
2
RADIO
A
3
MEDIA
A
4
PHONE
A
5
NAV
A
6
TMC
A
7
SETUP
A
8


A
9
A
10
A
11

A
12

A
13

A
14
A
15
A
16
A
17
A
1
A
1
A
1
Fig. 1 Overview of the operating
elements in the display
A
17
s39o.5.book Page 5 Wednesday, April 20, 2011 10:11 AM

General information6
“Slider”
– Press the slider and move it up or down (or turn the control button ) to
move within the current menu.
Go to next menu level
– Pressing the button takes you to the next menu level.
Return to the previous menu level with the button .
Set value
– Press the button opens up an additional screen in which it is possible to set
the required value by turning the button , e.g. treble.
“Pop-up window”
– Pressing the function key opens a so-called “Pop-up window” with additional
menu points.
– Briefly press one of the available menu points. The pop-up window will disap-
pear and the newly selected menu point is displayed in the function key.
If you do not choose any of the available menu points, the “pop-up window” will
disappear after around 5 seconds.
In the list of DAB stations, a DAB ensemble appears after pressing this function key
page 9, “Digital radio DAB”.
“Checkbox”
Some functions can only be switched on or off. There is a so-called “Check box” in
front of a function which can only be switched on or off:
- Function is switched on.
- Function is switched off.
– Briefly press the corresponding function key for switching on or off.
Variable function keys
The key function is context-dependent. The function currently being offered can be
selected by pressing the appropriate function key (or using button ).
Example menu
Press the button followed by the function key - buttons which must be
pressed in sequence.
- Description of a function key in the first menu level
- Description of a function key in the second menu level
- Description of a function key in the second menu level
- Description of a function key in the first menu level
Input screen with keypad
The input screen with keypad appears when entering a new line, searching for a
point of interest or a telephone number, for instance.
If you press a function key with a character on the keypad, this character appears in
the input line in the upper part of the display.
You can also delete or change the string in the entry line and add special characters.
The available characters are context-dependent.
Input possibilities:
- toggles between upper and lower case, or between numbers and special char-
acters (context-dependent)
- shows the special characters for the selected language
- switches to the Cyrillic script
- switches to the Latin script
- switches to the input screen for numbers and special characters
- switches to the input screen for letters
- Enter a space
- moves the cursor in the entry line - to the left or right.
A
A
A
A
A
15
A
B
A
B
A
13
A
C
A
C
A
15
A
D
A
D
A
E
A
F
A
F
A
17
ABC
DEF
XYZ
XYZ
XYZ
XYZ
Fig. 2 An example of an input screen
with keypad

áü

ABC

A..Z



s39o.5.book Page 6 Wednesday, April 20, 2011 10:11 AM

General information 7
- deletes characters in the entry line starting from the cursor position from
right to left.
Selecting letters based on specific characters
In the input screen, some of the characters are identified by the symbol “”.
Pressing the character identified in this way for a long period of time allows you to
choose special characters for the selected language.
Variable function keys
The variable function keys have the following functions in the input screen
(context-dependent):
- deletes the characters in the entry line
- confirms the text entered in the entry line
- opens an selection list, e.g. with states, cities, etc.
Delete
A
F
Delete
OK
List/OK
s39o.5.book Page 7 Wednesday, April 20, 2011 10:11 AM

Basic settings8
Basic settings
System and sound settings
System settings
Press the button and then the function key .
- Menu language for the displays and the language messages
- auto-detection of menu language, depends on the setting in the
information display
or direct selection of the required language from a list
- specifies the keypad layout for text input
- keys arranged alphabetically
- QWERTY keypad layout
- specifies the display length of changes to Climatronic
- screen setting
- adjust the screen brightness
- changes between day and night design. Automatic mode
depends on switching the low beam on or off.
- switches confirmation tone on/off by pressing a function
surface
- restores unit to factory settings
- removes SD card
- switches time display in the display on/off when the radio navi-
gation system is switched off.
Sound settings
Press the button and then the function key .
- volume setting
- volume setting after switching on
- setting the volume for the Traffic program (TP)
- Setting the volume of the navigation announcements
- Setting the reduction of the volume when the park
distance control is active
- Speed dependent volume adaptation
- Treble setting
- Mid-range setting
- Bass setting
- Setting of the balance between the left and right side
- Setting the balance between the front and the rear;
- Setting the equalizer (linear, voice, rock, classical, dance)
- Setting of the surround tone.
SETUP
System
Language
Adaptive
Keypad layout
ABC
QWERTY
Air con. displays
Screen
Brightness
Day/night
Confirmation tone
Factory settings not restored.
Remove SD card
Clock display
SETUP
Sound
Volume
Max. switch-on volume
Traffic program (TP)
Navigation volume
PDW vol. reduction.
SDVA
Treble
Mid-range
Bass
Balance
Fader
EQ settings
Surround
s39o.5.book Page 8 Wednesday, April 20, 2011 10:11 AM

RADIO mode 9
RADIO mode
Radio mode
Main menu RADIO
Press the button .
Repeated pressing of the button - change frequency band.
Function keys
- opens a list of additional functions
- switches on/off the display of station presets to
- manual station search by turning button
- auto--play all stations in the current frequency band, each station for
around five seconds
- switches traffic programme on/off page 10, “Traffic Program TP”
Function key
- opens the list of frequency bands
-opens the list of DAB stations page 9, “Digital radio DAB”
- Update list of DAB stations
- stores the current station to the selected memory button
- opens the list of all FM stations currently in range
- stores the current station to the selected memory button
- switches to the AM band; list of stations not available
Function keys to
Direct selection of the stored station.
Press down to untila signal sounds- stores the current station to the selected
memory button.
Changing the station
or - depending on the setting of the “arrow keys” - changes the saved station
or all stations currently within range in this area
RDS display setting
Press the button - switches on/off the Radio Data Service RDS.
RDS (“Radio DataSsystem”) serves to transmit program identification and additional
services therefore also enabling automatic tracking of stations.
Settings in RADIO mode
Press the button →
- switches the traffic programme on/off
- Setting the function of the station selection in RADIO mode
using the arrow keys
- Switches all stations currently in range for the selected
frequency band
- Switches to the stored stations (the following symbol appears in
the display )
- switches on/off automatic station tracking with RDS
- auto-selects station with the best reception at the moment
- the selected regional station remains set for as long as possible
- DAB radio settings
- switches on/off DAB announcements
- switches on/off DAB station tracking page 10, “DAB
program tracking”
- switches on/off auto-switching from DAB to the FM
frequency band if the DAB signal is lost page 10, “Auto-change DAB -FM”
- deletes the preset stations
- deletes a single station
- deletes all stored stations
- switches on/off the search for alternative frequencies of
the station currently being listened to
Digital radio DAB
DAB - Digital Audio Broadcasting is the digital transmission of radio programs
based on the DAB, DAB+ or DMB standards. It allows multiple stations to be trans-
mitted in a single frequency in the form of a so-called ensemble. It also allows for
the transmission of additional data and information (e.g. messages, sport, weather,
warnings, etc.)
RADIO
RADIO
Extras
Extras
Presets
1
24
Manual
A
15
Scan
TP
Band
Band
DAB/List
Update
Store
FM/List
Store
AM
1
24
1
24



RADIO
SETUP
Traffic program (TP)
Arrow buttons
A
8
Station list
Presets
RDS Regional
Adaptive
Fixed
DAB settings
DAB announcement
DAB station tracking
Auto. DAB-FM switching
Delete presets
Single
All
Alternative freq. (AF)
s39o.5.book Page 9 Wednesday, April 20, 2011 10:11 AM

RADIO mode10
In regions without DAB coverage, the following symbol appears in DAB Radio mode
.
List of DAB stations
Press the button followed by the function key →
- an ensemble of DAB stations
- DAB stations with the names XYZ
- DAB stations with the names XYZ which are not currently in range
- DAB stations with the names XYZ which are only currently in range in
the FM frequency band
Calling up additional information
If additional information is available for a DAB station, an appropriate message will
appear beneath the station name.
You can move between the items of additional information using the buttons
and .
DAB program tracking
If a DAB station is a member of several ensembles, when the signal is poor, the
same station is searched in a different ensemble.
Auto-change DAB -FM
If the DAB signal is poor, the unit will try to find a corresponding FM station for the
DAB station you are currently listening to.
For auto-change to work, the DAB and FM stations must send a sender ID.
While the station is being received via the FM frequency band, (FM) will appear next
to the station name . When the corresponding DAB station is in range again, the
(FM) display disappears.
If a DAB station is also not available in the FM frequency band due to poor reception,
the radio will be switched to mute.
If you do not want automatic station change (e.g. when driving through tunnels,
when reception may be lost temporarily), you can deactivate this function page 9,
“Settings in RADIO mode”.
Traffic Program TP
The display “TP” in combination with a station name (e.g. in the station or preset
list), indicates a traffic programme station.
Irrespective of which radio station is heard, an additional receiver part ensures that
a traffic programme station can always be received as long as the traffic programme
function is switched on. During media mode, the unit always searches for an avail-
able traffic program station in the background.
The availability of traffic programme monitoring is identified by the letters “TP” at
the top right of the screen.
If no traffic programme station can be received because, for example, radio recep-
tion is interrupted in general, “No TP” will be displayed instead of “TP”.
RADIO
Band
DAB/List
XYZ
XYZ
XYZ 
XYZ (FM)


s39o.5.book Page 10 Wednesday, April 20, 2011 10:11 AM

MEDIA mode 11
MEDIA mode
Main menu MEDIA
Main menu MEDIA - Overview
Press the button .
Selectable audio sources in the menu MEDIA
CD - changes over to an inserted CD
CD 1-6 - changes over to a connected external CD changer
SD card - changes over to an inserted memory card
, or changes over to a connected external audio source. Operating an
externally connected audio source is possible, with certain restrictions, via the radio
navigation unit and depends primarily on the type of the connected unit.
Buttons for operating current audio sources
Press - to start current track
Briefly press twice - to start the previous track
Press and hold - “back to start” - fast rewind
Press - to start next track
Press and hold. - fast forward
Setting the time or track display
Press the button - to switch between the display of playback time or track title or
track info.
Settings MEDIA mode
Press the button →
Function keys in the menu Settings Media
- switches the traffic programme on/off
- switches on/off the track play function in the modes
“Scan”, “Mix” and “Repeat” including sub-directory page 11, “Playback options”
1) - Input volume for an external audio source at the multimedia
socket AUX-IN
1) - Input volume for the iPod™ or iPhone™ units via the multimedia
socket MDI
- Settings for the Bluetooth®- function page 17, “Settings
in PHONE mode”
1) - Input volume for an external Bluetooth audio source®
Playback options
Open selection menu for the available audio sources
Press the button and choose one of the available audio sources
- Display the title list for the audio source currently being played. The
currently played track is shown as highlighted.
- opens the higher-level folder (press again to switch up to the root
directory)
- Plays the selected track
Playback modes
Press the button followed by the function key - additional functions
appear
- All the titles of the current media source are played for approximately 10
seconds
in “Scan” mode - return to normal playback
- all tracks in the current folder are played in random order
in the “Mix folder” mode - return to normal playback
- all tracks in the current audio source are played in random order
in the “Mix all” mode - return to normal playback
- repeats the track currently being played
In “Repeat Track” mode - returns to normal playback
- all tracks in the current folder are repeated
in “Repeat folder” mode - returns to the normal playback
MEDIA



AUX
MDI







RADIO
SETUP
Traffic program (TP)
Scan/mix/repeat inc.
AUX volume
1) Used to adjust the playback volume with other audio sources.
MDI volume
Bluetooth settings
BT volume
MEDIA
Select
Up
Play
MEDIA
Extras
Scan
Scan
Mix folder
Mix folder
Mix all
Mix all
Repeat track
Repeat track
Repeat folder
Repeat 
s39o.5.book Page 11 Wednesday, April 20, 2011 10:11 AM

MEDIA mode12
General information for CD operation
Insert CD
– Insert a CD with the written side facing up as far as possible into the CD case
until it is automatically drawn in. The play function will start automatically.
Eject CD
– Press the button , the CD is ejected.
If the CD is not taken out within 10 seconds, it will be retracted again for safety
reasons.
CD not legible
If you insert a CD which cannot be read by the unit, a pop-up window is displayed
with a note. Press on the function key , the CD is driven to the initial position.
WARNING
The CD player is a 1st class laser product. There is a definite risk of injury from
invisible laser beams if it is opened.
Caution
•Only audio-CDs (CD-A) and MP3-CDs can be played in the internal drive. Never
place DVDs into the internal drive- irreparable damage may result.
•Never place Eco Disc CDs into the internal drive.
•Inserting a second CD while a CD is being ejected can destroy the CD drive in the
unit. After pressing the Eject button there is a delay of a few seconds before the
CD is ejected. During this time the lock in front of the CD case is open. It is essential
that you wait until the CD has been fully ejected before you try to insert a new CD.
•If the CD has mechanical damage or is incorrectly or not fully inserted, the
following message “ appears in the display: CD”. Please check the CD and place it
again correctly into the drive. if the message “Error: CD” appears again, try a
different CD. you may need to contact a specialist garage.
•If the inside temperature of the unit is too high, no CDs will be accepted. The unit
switches into the last active operating mode.
Note
•If the function key is inactive, no Audio CD has been inserted or the inserted
Audio CD is not readable.
•It is possible that CDs protected by copyright and self-made CD-R and CD-RW
are not returned at all or only in certain circumstances.
•Please comply with the national legal copyright requirements in your country.
•The CD player contains no parts that have to be serviced or repaired. If the CD
player is defective, contact a specialist garage.
Inserting and removing the memory card
Inserting a memory card
– Push the memory card into the memory card case with the trimmed edge to
the front right until it “locks into place”. The play function will start automati-
cally.
Taking out a memory card
– In the “System and sound settings” menu, choose the menu point “Remove SD
card” page 8, “System and sound settings”.
– Press the inserted memory card. The memory card “jumps” into the initial posi-
tion.
Memory card empty or data not readable
If a memory card is inserted, on which no data or no legible data has been stored, it
will not be switched over into the memory card mode after the loading procedure.
External sources
External sources - Overview
Input AUX
Press the button and then the function key .
The input for an external audio source AUX is located on the front of the unit .
External audio sources connected to the AUX socket cannot be operated via the
radio navigation system.
Use the standard jack plug 3.5 mm for the AUX socket. If the external audio source
does not have this jack plug, you must use an adapter page 14, “Requirements for
media sources and audio files”.
A
9

A
11
OK

CD
A
16
MEDIA
AUX
A
14
s39o.5.book Page 12 Wednesday, April 20, 2011 10:11 AM

MEDIA mode 13
Input MDI - Multimedia socket
Press the button followed by the function key .
The input MDI is located under the armrest of the front seats or in or under the
storage compartment on the front passenger side.
Audio files in MP3, WMA, OGG Vorbis and AAC format from the external data stickers,
connected to the MDI input, can be played via the radio navigation system
page 14, “Requirements for media sources and audio files”.
External audio sources connected to the MDI socket can be operated via the radio
navigation system.
You can select another audio source on the radio at any time. As long as the external
audio source is not switched off, it remains always active in the background.
Please refer to the Owner's manual of the respective manufacturer for the opera-
tion of the external audio source.
Adapter
A special adapter is required to connect audio sources via the input MDI.
You can purchase an adapter for connecting the USB devices, devices with a Mini
USB output or an iPod, from the range of Škoda original accessories.
iPod
If an iPod is connected to the MDI input, a menu is opened in which you can select
the folders of the iPods (playlists, artists, albums, songs etc.).
Connecting an external audio source via Bluetooth®
In Bluetooth audio mode, audio files can be played from an external audio source
(e.g. a mobile phone) connected via Bluetooth®.
To activate this function it is necessary for the external audio source to be
connected to the radio navigation system page 15, “Connect mobile phone or
Bluetooth® device to navigation system”.
Adjust the play function volume of the external audio source
The play function volume of the external audio source can be changed via the
volume control on the radio navigation system .
Depending on the connected audio source, the output volume on the external audio
source can be changed.
You can also change the input sensitivity of the external audio source page 11,
“Settings MEDIA mode”, in order for the play function volume of the external audio
source to adapt to other audio sources or to avoid distortions of the play function
volume.
WARNING
•On no account place an external audio source on the dash panel. You could
make sudden manoeuvres in the passenger compartment and injure the occu-
pants.
•On no account place an external audio source close to the airbags. You could
be thrown back in the passenger compartment by the airbags being deployed
and injure the occupants.
•You must not hold the external audio source in the hand or on the knees
while driving. You could make sudden manoeuvres in the passenger compart-
ment and injure the occupants.
•Always guide the connection cable of the external audio source in such a way
that is does not restrict you when driving.
Caution
The AUX socket must only be used for audio sources!
Note
•The external audio source, which is connected via AUX-IN, can only be used if no
unit is connected via MDI at the same time.
•If an external audio source is connected via AUX, which is equipped with an
adapter for external power supply, it can occur that the audio signal is interrupted.
This depends on the quality of the adapter which is used.
MEDIA
MDI
A
1
s39o.5.book Page 13 Wednesday, April 20, 2011 10:11 AM

MEDIA mode14
Requirements for media sources and audio files
Media source Playback prerequisites
Audio-CDs (max. 80 min) with a diameter of 12 cm. CD digital audio specification
CD-ROM-, CD-R-, CD-RW with a diameter of 12 cm up to a max. of 700 MB (Mega-
bytes) in ISO 9660 Level 1 and 2, Joliet or UDF 1.02, 1.5, 2.01, 2.5 file system
SD- and MMC memory cards 32 mm x 24 mm x 2.1 mm or 1.4 mm with the FAT12,
FAT16 and FAT32 file system up to a max. 2 GB (Gigabytes) and SDHC memory cards
up to a max. of 32 GB.
– MP3 files (.mp3) with Bit rates of 48 to 320 kbit/s or a variable bit rate.
– WMA files (.wma) up to 9.2 or to 10.0 mono/stereo without copy protection.
– Audio files in the OGG-Vorbis and MPEG4 AAC formats.
– Playlists in the PLS, B4S, ASX and WPL formats.
– File names and paths not longer than 256 characters.
– Folder structures with a maximum of eight levels.
– Max. 256 folders and a max. of 512 files on audio data CDs.
– A max. 2048 folders can be stored on memory cards and a max. of 15000 files,
max. 6000 files per folder.
Playing audio files via Bluetooth®a).
a) Bluetooth®is a registered trademark of Bluetooth SIG, Inc.
– The mobile phone/external audio source must support the A2DP-Bluetooth®pro-
file.
AUX. External audio source Audio output via 3.5 mm jack is possible.
MDI external data media Compatible with MEDIA-IN interface
s39o.5.book Page 14 Wednesday, April 20, 2011 10:11 AM

PHONE mode 15
PHONE mode
Connect mobile phone or Bluetooth®device to
navigation system
To operate a mobile phone or other Bluetooth®device from the radio navigation
system, a one-off connection of both devices is required.
Active connection
When the connection is active, the device search is launched from the radio naviga-
tion system.
Enable Bluetooth®on your mobile phone.
Press the button →
- Settings for the Bluetooth®- function
- Search for external devices with an activated Bluetooth®
function
The search can take around 15 to 20 seconds. When the process is complete, the
name of the Bluetooth devices is shown in the screen.
You can search for the mobile phone you want to connect directly by pressing the
function key with the name of the mobile phone or you can search for it by turning
the button before pressing the button .
Activate the connection on the mobile phone and enter the 4-digit PIN code in the
screen of the radio navigation system.
If the entry is correct, the message appears in the display that the connection was
successful.
Passive connection
When the connection is passive, the device search is launched from the mobile tele-
phone.
Enable Bluetooth®on your mobile phone.
Press the button →
- Settings for the Bluetooth®- function
- Switch on visibility of the radio navigation system on
other devices with the Bluetooth®function
Launch the search for Bluetooth®audio accessories on the mobile phone. The
search can take around 15 to 20 seconds. Once the search is complete, the radio
navigation system is displayed on the mobile phone as SKODA_BT.
Enter the connection on the mobile phone and enter the 4-digit PIN code in the
screen of the radio navigation system.
If the entry is correct, the message appears in the display that the connection was
successful.
Deleting connected devices
A maximum of 4 mobile phones or Bluetooth®devices can be connected with the
radio navigation systems. To connect an additional device, a mobile phone or Blue-
tooth®device must be deleted first.
Press the button →
- Settings for the Bluetooth®- function
- List of devices connected with the radio navigation
system
- Delete the selected connected mobile phone or
Bluetooth®device.
Overview
Main menu PHONE
Main menu TELEPHONE
Press the button .
Individual functions in the menu PHONE may depend on the equipment and the
properties of the connected mobile phone.
The mode can only be activated while the ignition is switched on.
When switching on the radio navigation system, this automatically connects with
the mobile phone with which it was last connected. If it is not possible to connect
with this mobile phone, the system automatically attempts to establish the connec-
tion to the next mobile phone which is in the list of the connected devices.
PHONE
SETUP
Bluetooth settings
Search for devices
A
15
Connect
PHONE
SETUP
Bluetooth settings
Set Bluetooth visibility
PHONE
SETUP
Bluetooth settings
Paired device list
Delete
PHONE
PHONE
s39o.5.book Page 15 Wednesday, April 20, 2011 10:11 AM

PHONE mode16
Function keys in the main menu TELEPHONE
Press the button .
- Switches on voice operation, only with GSM II telephone preinstallation.
Further information on how to operate the voice control can be found in the
operating instructions of your vehicle.
- emergency setup only with the GSM III telephone preinstallation via
the rSAP profile. Further information on how to operate the GSM III telephone
preinstallation can be found in the operating instructions of your vehicle.
- Accept a call, dial the entered number. After pressing, the call list is
displayed in the main menu PHONE.
- End or reject call - only active during a call
- Dial number
- Delete numbers
- Dial number
- Open phonebook
- Open the input screen for search in the phonebook
- Display information relating to a telephone book entry
- Open the list of missed calls
- Edit number
- Dial number
- Open list of dialled numbers
- Edit number
- Dial number
- Open list of received calls
- Edit number
- Dial number
- Voice mail (the voice mail number must have been configured)
page 17, “Settings in PHONE mode”
WARNING
Concentrate fully at all times on your steering! As the driver you are fully respon-
sible for road safety. Only use the system so that you are in full control of your
vehicle in every traffic situation - risk of accident!
Telephone calls and functions during a call
Calls can be received even if the radio navigation system is switched off.
If you have started the process of connecting to a call number or accepted a call, the
main menu PHONE will change to the display Phone conversation.
Starting a phone conversation
using the radio navigation system, you can start a phone conversation directly by
entering a telephone number, by selecting from the phonebook, the list of selected
phone numbers, or the list of received calls page 16, “Function keys in the main
menu TELEPHONE”.
If you vehicle is fitted with the GSM II telephone preinstallation, you can also start
the phone conversation using voice operation with the aid of the function key
page 16, “Function keys in the main menu TELEPHONE”.
Incoming phone call
- accept call
- reject call
Additional functions during the phone conversation
- opens a list of additional functions
- switches the microphone on/off during the conversation. A conver-
sation in the vehicle is not picked up by the microphone and so cannot be heard
by the other party.
- switches the hands-free system on/off The conversation is not
broadcast to the vehicle through the speakers but only via the phone speaker
(private call).
- “hold” call (following appears: “Holding...”). The connection
remains but the call is not transmitted. - call is resumed
- Conference call involving all call participants page 16,
“Carrying out an additional phone conversation”
- opens the input screen for DTMF key tones
- end call
Carrying out an additional phone conversation
Press the button .
Select a new call number or select a stored call number.
- opens a list of additional functions
- switch between calls
PHONE

SOS



Delete


Find
Details

Edit


Edit


Edit





Extras
Mute
Hands-free
Hold call
Resume call
Conference
Enter numbers

PHONE
Extras
Swap call
s39o.5.book Page 16 Wednesday, April 20, 2011 10:11 AM

PHONE mode 17
- Conference call involving all call participants
DTMF key tones
A particular DTMF key tone is assigned to each each key of a mobile phone. DTMF
key tones are used, for example, for the input of a password via the mobile phone
or for choosing functions in a “Call centre”.
If a DTMF key tone has to be entered during a conversation, you can open the
keypad by pressing the function key →and follow the
instructions (for example: “For a private conversation with one of our co-workers,
please press ”).
Settings in PHONE mode
Press the button →
2) - Settings for the Bluetooth®- function
- opens a list of all connected devices
- Search for external devices with an activated Bluetooth®
function
- Switch on visibility of the radio navigation system on
other devices with the Bluetooth®function
- Change the 4 digit code for connecting devices
- Enter the mobile box number for the mobile phone
3) - Deletes all call lists from the memory of the phone unit
3)4) - switches off the phone unit(themobile phone remains
paired)
- adjusts the volume of the mobile phone by turning
button
- loads the phonebook from the mobile phone to the
memory of the radio navigation system. This procedure can take a few minutes.
- resets device to factory settings- deletes user profiles
2) This feature is not available if the mobile phone is connected by means of the GSM III tele-
phone preinstallation. Bluetooth®settings for the GSM III telephone preinstallation can be
found in your vehicle's Owners manual.
3) This feature is not available if the mobile phone is connected by means of the GSM III tele-
phone preinstallation.
4) This function is not active if the mobile phone is connected using the GSM III telephone pre-
installation via the HFP profile.
Conference
Extras
Enter numbers
3
PHONE
SETUP
Bluetooth settings
Paired device list
Search for devices
Set Bluetooth visibility
Enter passkey
Enter mobile box number
Delete call lists
Switch off telephone
Telephone audio volume
A
15
Load telephone book
Factory settings
s39o.5.book Page 17 Wednesday, April 20, 2011 10:11 AM

NAV mode (Navigation)18
NAV mode (Navigation)
Overview
Before using the radio navigation system
Street and location names can be changed. It is therefore possible under excep-
tional circumstances that the names stored in the navigation data might not corre-
spond to the changed names.
In regions not at all or only partially digitalised and which are therefore not included
in the navigation data, the radio navigation system will try to continue providing
guidance to the destination. Please note that under these circumstances the guid-
ance to the destination may not be completely correct if, for example, one-way
streets and road categories (motorway, country road etc.) are not at all or only
partially included in the navigation data used.
The route calculated by the radio navigation system is a recommendation for
reaching the intended destination. While driving please pay attention to stopping
restrictions, traffic lights, one-way streets, lane changes, bodies of water and
ferries, railways etc.
Safety instructions for the operation of the navigation system
WARNING
•Please concentrate fully at all times on your driving! Inattention by the driver
can lead to accidents and injuries. As the driver you are fully responsible for road
safety.
•The following must always have priority over the driving recommendations:
−the road traffic legislation, even if the driving recommendations contra-
dict the StVO,
−the actual acknowledgement of traffic signs, light signals or signs placed
by the police at the relevant location,
−the facts and circumstances prevailing at the relevant location.
•Please observe the respective traffic regulations when driving.
•Traffic signs and traffic regulations always have priority over the driving
recommendations provided by the navigation system.
•Route guidance is subject to constant changes, particularly to information
relating to one-way streets, pedestrian zones etc. stored in the navigation data.
Information on traffic lights, stop and right of way signs, parking and stopping
restrictions as well as lane constrictions and speed restrictions is not included in
the radio navigation system.
•Adjust your speed to suit weather, road and traffic conditions. Do not allow,
for example, the radio navigation system to make you drive faster in fog - risk of
accident!
•Only if the traffic situation allows it should you operate the radio navigation
system with its wide range of possibilities.
•The driving recommendations provided may vary from current situations,
e.g. due to road works or out of date navigation data. In such a case, always
observe the traffic regulations and ignore the driving recommendations.
General
The route is recalculated each time if you ignore driving recommendations or
change the route. This process takes only a few seconds. Driving recommendations
can only then be re-transmitted.
When entering an address (city, street), only those letters or symbols which make
up a logical entry will be presented. A list of possible names will be shown. Do not
forget to enter the blank space in names made up of more than one word, such as
High Wycombe page 6, “Input screen with keypad”
The last voice response can be repeated by pressing the button . The volume of
a navigation recommendation can be changed whilst it is being made.
The GPS satellites will not be able to reach the aerial once you are in a tunnel or
underground garage. The unit will orientate itself via the wheel sensors.
Note
•All dtns. (country-, village-, road-, point of interest names) must be entered
including all country specific (or language-specific for points of interest) special
characters.
•Depending on the country, some functions of the radio navigation system can
no longer be selected on the screen at certain speeds. This is not a malfunction, but
corresponds to the legal requirements of this particular country.
WARNING (continued)
A
15
s39o.5.book Page 18 Wednesday, April 20, 2011 10:11 AM